Help in updating a website..any suggestions anyone???
Hey,
I am trying to update a page on my website and it won't allow me to. I have the Dreamweaver software interacting with the FTP server, etc. What is going on wrong? Please respond as soon as possible.
Thanks.
Thanks for your response, but I am still getting this blank white page with links on them...why is that?
Go to the website....www.wayofrealdiscoveryinc.org and you will see my problem. Also, click on the link that says "2009 website" and that is the true website...
Thanks and I hope to can help me solve this problem.
What you see there is what normally happens when a) you browse to a folder for which there is no default file found by the server, and b) the host for the website has left 'directory browsing' enabled so that you are seeing a directory listing of the files on the server.
Obviously, this is a bad thing in most cases. The solutions are -
1. Ask your host to disable directory browsing
2. Create a file with a default filename and upload it to that folder (ask your host what the default filenames are)
How long have you had this domain with this host?
Similar Messages
-
I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
It could be that the battery has died -
I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??
The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data. -
When I log in to update a page it says that's someone else is already logged in (but they are not) so I'm not able to update the page - any suggestions?
I take it you are not the administrator for the site? If so, you would be given the option to unlock the page (it will be near the top of the screen in a yellow box).
Do you have access to the site outside of Contribute. If you can't unlock it via the administrative function mentioned above, you need to go into the site using Windows Explorer (if it's a local development site) or an FTP client and find a file with the same name as the page but with a .lck extension and delete it. That will unlock the page. -
My app store will not show the update page. Any suggestions?
My app store app will not show the update page. Any suggestions?
You haven't told us which version of iOS you're running.
Anyway, is it restricted? Check Settings > General > Restrictions -
I bought this laptop second hand and do not have the start up disk or previous password to update my software - any suggestions on how I can update my computer?
Try here:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
It has a link for XP -
I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?
You are in breach of your Developer agreement by posting in a Public forum
-
When I have my handsfree plugged in, the sms-tone and incoming-call ringtone is only played in my earpluggs. Any suggestions anyone?
I experience the same problem and it's extremely annoying. Have you found a solution yet?
Of course one might want to keep the earphones plugged in most of the time (if this is the way you prefer to answer you calls + talk on the phone) even if you're not using the phone/earphones. The ringtone does come through to to the speaker when someone calls… yet the sms signal DOES NOT and only plays in the earphones.
This means that the earphones must be unplugged after every call and then plugged in again before every call in order not to miss any sms:es! (Talk about unsafe driving e.g.!)
It would seem to be such an obvious setting/option to include in the iPhones settings. Why has Apple has completely missed this!? .... or is there a solution?
I have searched the internet but haven't found a solution? -
FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated
Hi AnaMusic,
It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
I'm currently working in Korea, but I bought the IPad in Australia,
Regards,
Namur -
Hi,
I cut 9 hours worth of broadcast video in PP CC 2014 8.0. (The yellow interface.) I had no issues. It was all great. For some reason, before I exported the finished cuts for broadcast, I updated the Adobe CC 2014 suite to v1.8.0.447 (PP has the blue interface). I feel stupid. I broke my own rule of not updating software until the projects you work on are done. Now I can't open this project without Red Frames in my timeline and in my exports. I have been reading about this Red Frame that seemed to first appear in PP CC 7. (Maybe even as early as 2006) I never had the problem then, I run Premiere Pro everyday.
My Issue seems to be a bit different than most of the issues that have read. I have cleared the cache, & I have ditched the preview files. This did not fix it as stated it would in previous forum posts. I have moved the footage location from a server to a local thunderbolt SSDrive and renamed the folders and re-linked the video footage. Still Red Frames.
What is odd, is when I boot up the project and after all media has loaded, it looks like it is going to work for a few minutes. I get happy and scrub the timeline checking for the red frames, hoping the problem solved when I cleaned the cache etc.. Everything seems to be fine, audio synch, picture, lower thirds and graphics all appear fine. Then the red frames appear over time, and by 5 minutes after scrubbing, I see mostly red frames. Audio is still there though. Even weirder, is that when I resize the height of the video track, the red frame comes and goes with no real pattern. The clip preview picture flickers with the red frame. The red frames export through through Premiere and through a Media Encoder cue which say .MXF read error so I'm hooped. ( it does render the video, but has the red frames )
I run a Mac Pro;
OSX Yosemite 10.10
3.5 GHz 6-cor Intel Xeon E5
16 GB Ram
AMD FirePro D500 3072 MB
Canon XF-305
.MXF files
1080p 29.97
5 Cam Multicam Seq.
Adobe CC 2014
Version 1.8.0.447
released on October 6, 2014
I am noticing something interesting with my source footage folders. I am getting some .mxfindex files with really long names, like temp files almost, that don't go away. I still get Red Frames after deleting them, clearing cache, changing drive locations and file and folder names and relinking. When I delete these long files the software wont boot the project very well and crashes a few times before it opens, still with red frames. This problem with this project occurs on every computer (4) in the studio, which are the same as mine, we all updated at the same time.
Files look like this:
What happened in that update? Is there a fix for this? Any suggestions? If not, Is it possible for me to roll back my whole CC 2014 version to 8.0? I am terrified to open any other of our projects... I am under time pressure and am starting to do the re-edit of this in CS6 which seems to run flawlessly, but because of Adobe's RIDICULOUS FAIL in backward compatibility, I can not open this project in anything but PP CC 2014. 120 hrs of lost editing will certainly have me scratching my head about continued use. Any suggestion, links or information would be appreciated.
Thanks .Hi 5neaky c,
5neaky c wrote:
For some reason, before I exported the finished cuts for broadcast, I updated the Adobe CC 2014 suite to v1.8.0.447 I feel stupid. I broke my own rule of not updating software until the projects you work on are done. Now I can't open this project without Red Frames in my timeline and in my exports.
You should still have a Premiere Pro CC 2014.0.1 (8.0.1) project file available to you by default. Can't you go back to that version and complete your project? That's what I'm recommending those having this problem do.
5neaky c wrote:
I have been reading about this Red Frame that seemed to first appear in PP CC 7. (Maybe even as early as 2006) I never had the problem then, I run Premiere Pro everyday.
As long as you ingest the footage via the Media Browser and do not update the project file, you shouldn't have issues like this. I have heard complaints in new projects with Premiere Pro CC 2014.1 (8.1), so I have reopened a previously closed bug.
5neaky c wrote:
My Issue seems to be a bit different than most of the issues that have read. I have cleared the cache, & I have ditched the preview files. This did not fix it as stated it would in previous forum posts. I have moved the footage location from a server to a local thunderbolt SSDrive and renamed the folders and re-linked the video footage. Still Red Frames.
If this is not working, please complete your project in Premiere Pro CC 2014.0.1 (8.0.1)
5neaky c wrote:
What is odd, is ...
Everything seems to be fine...
Then the red frames appear over time….
Yes, I've seen this with another customer's updated project.
5neaky c wrote:
I am noticing something interesting with my source footage folders. I am getting some .mxfindex files with really long names, like temp files almost, that don't go away. I still get Red Frames after deleting them, clearing cache, changing drive locations and file and folder names and relinking. When I delete these long files the software wont boot the project very well and crashes a few times before it opens, still with red frames. This problem with this project occurs on every computer (4) in the studio, which are the same as mine, we all updated at the same time.
Sometimes, deleting sidecar files can help the situation but not always. It looks like you are having trouble when deleting them.
5neaky c wrote:
What happened in that update? Is there a fix for this?
A bug that was fixed for red frames in 8.1 was somehow broken by the time we shipped this version. We have reopened the bug, but currently, there is no fix.
5neaky c wrote:
If not, Is it possible for me to roll back my whole CC 2014 version to 8.0?
Yes, see my blog post here: Install a previous version of any Creative Cloud application
Included in the post is a patch for Premiere Pro CC 2014.0.1 (8.0.1).
5neaky c wrote:
I am under time pressure and am starting to do the re-edit of this in CS6 which seems to run flawlessly, but because of Adobe's RIDICULOUS FAIL in backward compatibility, I can not open this project in anything but PP CC 2014.
Thanks .
You can always try exporting a FCPXML for backward compatibility, but for complex sequences (like multicamera), this isn't always an option. There aren't many NLEs providing backward compatibility, sorry. Feel free to request that, if you like, here: http://adobe.ly/feature_request
Thanks,
Kevin -
I cannot upgrade my software - using cable to pc in iTunes - starts download and then about 2-3'rds way thru says error 9006 can not complete downloa. Have now tried THREE times - eating my data - anyone have any suggestions please
error 9006 http://support.apple.com/kb/TS3694#error9006 follow instructions from link to resolve.
-
I cant open iPhoto library since I upgraded it. I says to upgrade to latest version. I have the latest version and have done an update. Any suggestions?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto. (You'd be surprised what some folks call the "latest version")
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
My phone is frozen with the itunes symbol and usb cord. Tried to update and cannot, any suggestions
My phone is frozen with Itunes and a USB cord icons, I tried to shut it off and update and cannot..... any suggestions?
First of all, your post says you have an iPhone 3G running iOS 6.0.1. That is not possible, as the iPhone 3G cannot run any iOS past 4.2.1.
So, if you simply made a mistake with that information, we can proceed. If not, your iPhone was hacked or jailbroken, and likely cannot be saved.
Try recovery mode as described below. You may have to try to put the iPhone into recovery mode more than once.
http://support.apple.com/kb/HT1808 -
Just released ! New Software Update - Java 5 Any suggestions?
My software update just advised me that there is a Java 5 upgrade. Any suggestions on this upgrade? Any special settings to Browsers after upgrade recommended? Thanks ! Geof
Just some more info,
Apple doesn't hasn't put out much info on the new Java 5. MacWorld/MacCentral has an small article on Java 5, but it doesn't say much. The link below will bring you to the Java 5 article at MacWorld:
http://www.macworld.com/news/2005/11/15/j2se/index.php
Here is some more info:
http://www.onjava.com/pub/a/onjava/2005/08/17/asm3.html
It doesn't seem to be a necessity. I have also heard something about Google switching to the new Java but I don't know anything about it.
Jon -
I set my iPad to do the latest iOS update as per usual - over the air and while on charge. When I returned to it, it was non functional the screen was blank. I reset multiple times and at one point got a red screen. I connected it to iTunes on my Mac and tried to force a restore, but this didn't work - even in DFU mode. I have gotten a 4013 error every time. I've tried different cables and different USB ports etc, but no success. It's a brick.
I have multiple Macs around the house and have tried all of them - all with the same results alas. I've restarted, ensured iTunes is up to date etc too.
On DFU mode - yes - that's it. I have no idea what DFU stands for, but it this mode is often referred to as this. I get the 'connect to iTunes' picture and can begin the restore, but the process times out waiting for the iPad. Apparently, 4013 is associated with a cable problem,, but I know the hardware is all fine.
What I want to avoid is just being told to buy another iPad. That would be totally unacceptable for an error caused by an update to a 16 month old device. There has to be some solution!
Maybe you are looking for
-
<pre><i>Locking duplicate thread. Please continue here: [[/questions/983346]] </i></pre> I am having a problem with a tab that opens in Firefox and prevents any other action I try to make. It will not let me leave the page. It reads as below, with th
-
Hi, Just recently I bought a Zen Touch. I've always charged after the "low battery" sign is displayed, played songs at 92 Kbps, and rarely used equilizer settings. However, I'm still beginning to notice severe shortening of battery life. Can anyone t
-
I have various rules set up in Mail.app which usually work fine for new mail that I download. However if I have already read an email on my iPhone during the day (from my .me IMAP account), when I get home in the evening the email still downloads to
-
Is this sense to play games on Samsung UE32F5000 LED TV?
Hey. Is this sense to play games on Samsung UE32F5000 LED TV? . My mother bought it to watch TV. But i am thinking now , can i play games on this? Max res is 1920. Will be good quality? I am asking because this is 32 size, very big . Got HDMI too:) Y
-
DUMP GETWA_NOT_ASSIGNED by ASSIGN FS dynamically
I got a DUMP GETWA_NOT_ASSIGNED, which is triggered by the ASSIGN statement. I once raised this problem. The code is as: data: name3(21) value '(SAPLMBWL)IMSEG-ABLAD'. assign (name3) to <f>. here, IMSEG seems to be a interface of some FM. At last ti