Help! Infocube 0SEM_C02 not available

When i am creating new initiative for my balanced scorecard the warning message appears: 'infocube 0SEM_C02 not available', though i've activated 0SEM_C02 infocube. Whats wrong?

I wrote, that I have already installed the cube. And this cube is visible in modelling area in active status...
Cube 0SEM_C02 is also available through 'listcube' and 'listschema' transactions.
But
1) I start UMB_CUST transaction
2) Then i create or edit initiative
3) Select 'General' tab
4) I mark flag 'SAP standart settings' in 'Data source for value fields' frame of 'General' tab.
After that, message 'Infocube 0SEM_C02 not available' apperars.
Name of infocube and BW report name becomes red!
BW 3.5, SEM 4.0
Message was edited by: V.M. Zosidze

Similar Messages

Infocube 0PS_C01 not available in BW Business Content& query 0PS_C02_Q0005

Hi
In Project systems module, the Infocube 0PS_C01 not available in BW Business Content& also queries relevant to the infocube are alos not available.
how to get the relevant infocube. Please let me know.

Hi,
Check the relevant Datasource for your Infocube in help.sap.com. Install from RSA5 and RSA6 in ECC side.
Replicate in BW and Install your Cube from BI content.
Actually you can check your cube in Meta data repository.
Regards,
Suman

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Adobe Indesign: Adobe Help Viewer is not available! All Updates installed. How to fix?

Hello,
I have CS6 Design Standard installed on Windows 7 x64.
When i choose the Indesign-Help in Menu i get a "Adobe Help Viewer is not available" Error.
All Products are on the latest updates.
How can i fix this?
Greetings
Sebastian Schad

I have already tried this KB Adobe Help Manager | Troubleshoot Error Codes but this option is not available

Can anyone help? "DynamicLink" not available attempting to open Mov in Photoshop CS6

Can anyone advise where I should go to get help with this? as this is obviously not the right place!
Hi,
Using CS6 Photoshop extended on iMac early 2008 model.....
Processor 2.8 GHz Intel Core 2 Duo
Memory 4 GB 800 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2600 Pro 256 MB
Software Mac OS X Lion 10.7.4 (11E53)
I get this message when I try to open a .mov file...
"Could not complete your request because DynamicLink is not available?"
What does this mean does anyone know - my .mov file is about 7MBs.
Am I expecting too much, I'm hoping to import video and export as animated .gif
Thanks,

Hi everyone,
I am experiencing the same problem, after a fresh clean installation of the mastercollection.
Particularly, I would love to solve this for Photoshop, as the very first post initially asked.
Computer Environment:
MacBook Pro Early 2011
Graphics AMD Radeon HD 6490M 256 MB
Memory 16 GB 1333 MHz DDR3
SSD with 512GB; about 81GB are still free
Software:
Mavericks OS X 10.9.5
Adobe Mastercollection CS6 Extended, 64bit.
Including the Dynamic Link Media Server Update 1.0.1 are all individual apps up to date as of today, March 9 2015.
Quicktime Player (v.10.3) and
Quicktime Player v.7.6.6
From this discussion, I followed Merediths suggestions under
post #17 (the ones that apply to me as a Mac user).
I double-checked, if some security or anti-virus-software was responsible – I don't have any.
I also tried her suggestions under post #4 however: #4.4 (her last suggestion in that post) but
Bridge is not working at all. It launches, but crashes as soon as you see the workspace.
Hence, Mini Bridge in Photoshop is also crashing.
I do have all codecs for the videos, that I was trying to open, though.
It cannot be an issue, that I have not enough RAM.
After several other problems with After Effects, Premiere Pro and Media Encoder, which remain partly unsolved, this post starts form a fresh installation of the whole Adobe Suite (count: 8 times). Even used the Cloud Cleaner Tool beforehand and made sure, all presets are from this CS6 version only.
The exact error message that I am getting is «Could not complete the Video Frames to Layer Command because the DynamicLink Media Server is not available.»
Other notes:
I am also following this discussion Re: trying to import video"Could not complete your request because it is not the right kind of document"
which is a newer thread with the same question (but without any solutions).

Help Please - Function not available to this reponsibility. Change....

Hi,
I am implementing Quality Module.
I have copied the collection plans
Defined parent-child relationship
Updated menu entry to point to the correct plan (Mandatory). Made changes to Form Functions window
I am in Receiving Transactions and I enter the quality results, select the child plan (Nonconformance Master Plan) and click on Enter. I get the message "Function not available to this responsibility. change responsibilities or contact system administrator".
Ideally I should be getting Nonconformance form.
Kindly help. Thanks

How do you suggest me to go to Quality Plan?
I have selected the child entry mode as "immediate". So even if I try closing the form, it is suggesting me to enter the child plan (As per trigger I set) and I do select the child plan from drop down and click Enter.

Help::algorithm tls not available

i am using the j2se1.4.2.03
when i start tomcat ,the error accor:
java.io.IOException:algorithm tls not available
lefecycleException: Protocol handler start failed: java.io.IOException:algorithm tls not available
the server.xml:
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
debug="0" connectionTimeout="20000"
disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory"
keystoreFile="conf/keystore-file"
keystorePass="myangel" clientAuth="false" protocol="TLS" />
</Connector>
what's the porblem ,please contact me email:[email protected]
thank you very much!

check $JAVA_HOME/jre/lib/security/java.security
and make sure that
com.sun.net.ssl.internal.ssl.Provider is in the list of Providers:
e.g.
# List of providers and their preference orders (see above):
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.net.ssl.internal.ssl.Provider
security.provider.3=com.sun.rsajca.Provider
security.provider.4=com.sun.crypto.provider.SunJCE
security.provider.5=sun.security.jgss.SunProvider

HELP! - Fonts not available after migration to Leopard

My company recently upgraded my Mac from a PowerPC G5 tower - which worked perfectly, to a MacBook Pro Intel Core Duo - so I would be able to work from home. I work in publishing and use pre-set templates and fonts within QuarkXPress. The most important fonts are the ones needed to build our publications, but ever since I've migrated all of my files, fonts, settings, etc. from the PPC to the Intel machine, those (and other) fonts don't work. They don't even show up in the list of available fonts.
We use FontAgent Pro, and I've tried updating that. I've tried demos of other font managers as well as the built in Font Book software. I've installed and run Font Finagler and cleared out all font caches. I've even tried installing those fonts directly into the "/Library/Fonts" folder and the "/System/Library/Fonts" folder and nothing works well. The only one that PARTIALLY worked was Suitcase Fusion, but it didn't recognize all of the fonts - and the ones it did recognize, it changed their names: i.e. "Nimrod MT Bd" became "Nimrod MT-Bold" resulting in the missing fonts message in QuarkXPress.
System: MacBook Pro, 2.2GHz, 2GB RAM, Leopard version 10.5.1, QuarkXPress, FontAgent Pro
Typfaces not working: Nimrod MT, Nimrod MT Bd, Nimrod MT It, Myriad MM (numerous versions)
Anyone have any ideas?
Thanx in advance,
Darryl

Hi Darryl,
From the sounds of it, you have the outline portion of some Type 1 PostScript fonts, but don't have the whole font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
Adobe Garamond
AGarBol
AGarBolIta
AGarIta
AGarReg
AGarSem
AGarSemIta
The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
3) Having only the outline fonts will not work. You will get exactly what you are having problems with. You can see the fonts, but Font Book won't load them. That's not a problem with Font Book itself. No font manager will load outline fonts without the matching suitcase of screen fonts present.
It also may be how you copied them. If the fonts were active on the source Mac and you tried to copy them across a network or via FireWire, that usually doesn't work. Copy them first to a new folder on the desktop of the Mac the fonts reside on. Then copy the desktop copies to your MacBook Pro.

Help menu items not available Logic Pro 9

I think this problem occured after upgrading to Mavericks. When I use the help menu in LogicPro9 and click on the most relevant keywords that I have typed I am presented with a dialog that indicates: "The selected topic is currently unavailable. The topic you were trying to view could not be found."
I think this may be related to Spotlight not being indexed properly. After having problems re-indexing Spotlight I finally realised that in order for Spotlight to re-index correctly I had to add my permanently installed SD card to the Spotlight Privacy eclusion list. Instead of Spotlight taking 5+ hours to re-index a fast SSD it now did it in about 10mins.
I am now confident Spotlight has re-indexed successfully.
But the help menu items are still "unavailable"
OSX 10.9.1
MacBookPro Mid 2012
Logic Pro 9.1.8

I'm still putting this question out there to anyone who can help solve this problem. After trashing the Logic Pro9 App from the Finder>Applications I visited the Mac App Store and under the Purchases icon I re-installed Logic Pro9.
The Help menu is still returning:
"The topic you were trying to view could not be found." when clicking on the suggested returned results in relation to my search keywords.
I know there are better resources out there but I find it handy to use the help menu instead of reaching for a book or website/weblink.
Eventually I will switch to Logic Pro X but as Lennar Digital is still finalising their 64Bit version release of Sylenth (popular soft synth) I will wait until that is completed later in the year.

Help iCloud Restore Not Available

Hi Everyone, I'm hoping someone here can help me out of a tough spot...
My iPhone 4S has a cracked screen and is totally unusable. I can't slide to unlock it or enter my passcode because it's totally broke and non-responsive. This has happened whilst I'm away from home on a Christmas break, so no access to my normal machine. Some time ago I made an iCloud Backup, but this is currently switched off on my 4S.
Now, here's the bit I need help with.
Someone has given me an iPhone 4 to tide me over until I get home. They don't care about the content on it and they're happy for me to wipe it so I can get my contacts etc and use the phone.
I logged in to iCloud on the phone, but it says last backup "never" even though when I log into iCloud on a PC I can see all my contacts. The other puzzling thing is that when I go to "Manage Storage" in iCloud it says that my backup used 4.7GB and there is 317MB available.
I read somewhere that the only way to restore from an iCloud backup is to wipe the phone and then choose restore from iCloud. Is that correct, or should I just be able to choose my backup and restore? I'm confused why this phone is saying last backup: never????
Any help greatly appreciated.
Thanks
F

Just posting an update to say that I got this to work. In case anyone else has a similar issue, here's what I did...
a) Went into settings and chose to erase all content from the iPhone.
b) After freaking out in panic, I then went through the steps that followed and chose to restore from iCloud Backup.
c) I was relieved to see that my iCloud backup was there as an option and that the restore process is completed and all my contacts have come back and my apps are downloading. Phew!!!
Hope this helps someone else.
F

Help! Oracle not available

Hello all,
I shut down immediate my database
I made changes in the init.ora: log_archive_start=TRUE
log_archive_dest="LOCATION"
log_archive_format="FORMAT"
Startup mount restrict OK
alter database archivelog OK
archive log list OK
shutdown immediate for offline backup OK
offline backup OK
startup nomount PROBLEM!!!
ORA-00439: Feature not enabled: Managed standby
What should I do???
Thanks in advancy for your advice!
Hans Puts

Hans,
Either you've actually specified your log_archive_dest parameter as "location' literally or you've put something like log_archive_dest_1=c:\oracle\archive instead of log_archive_dest_1="location=c:\oracle\archive" or vice versa log_archive_dest="location=c:\oracle\archive". By the looks of the error message it appears that you might havea standby db - in which case you will want to be using log_archive_dest_1="location=<your_local_arch_dest> and also have log_archive_dest_2="SERVICE=<tns_service_name>" if using a remote standby (if using a local standby then log_archive_dest_2 will also ="location==<your_other_local_arch_dest_for_the_standby_db>
Hope this helps
This infamous
Eric Cartman

Help: YouCam software not available for Lenovo G500 (see also message from fishermanjack)

Hello all,
I've got the same problem like fishermanjack. And downloading from above link doesn't solve my problem, because trying to install the software I get the message "The software can only be installed on a LEGEND Dragon system"...
What is that for a stupid issue? And there is only a Lenovo YouCam for G470 and G570. Why?
Can anyone help me?
Best Regards
MueThor .
Solved!
Go to Solution.

hi MueThor,
After running the YouCam installer (IN12STW62WW5.exe), can you try the following:
1. Navigate to the C:\Drivers\YOUCAM\Lenovo-NB_YouCam3.1 _Standard_3603_YUC100901-01_R7 folder
2. Right click on Custom.ini and choose Edit (this will open Notepad). From here, change LEGEND Dragon entry to Lenovo and save. When finished, run the setup.exe and YouCam should now install successfully.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Help! Bluetooth: Not available

After trying all sorts of recommendations posted in this forum I still have not managed to get my Bluetooth back. If I try to update the Bluetooth Software or Firmware it says I can't as I do not have a Bluetooth module installed, which I do. The suggestions range from;
- Powering down and removing battery
- Remove all cables
- Powering up with a Video adapter cable installed
- System pref changes
- Reset PRAM & NVRAM
To name but a few....
Rather than having to pick through all the posts on this forum, would it be unreasonable to ask Apple to place a post detailing their position on this issue. All I seem to read on the site is how seemless and beautiful Bluetooth is, which is obviously far from the truth.
I am sure it is great, when you do eventually managed to get it working. So, Apple, please do let us know what you have to say..........

"Blue Tooth of Kentucky, keep on shining..."
Took a week or so to but finally the BT module arrived from PBFixit.com.
I followed their simple instructions on "Installing DC & Sound Card" for the 15" Powerbook on www.pbfixit.com.
It was totally not hard! (=Emulated youth lingo...) The Bluetooth module installation did not require removing the keyboard. You can just rotate the upper case (including the keyboard) to lean on the screen. It took only 15 minutes to swap the BT module. You need a small Phillips screwdriver and a Torx T6 screwdriver.
Anywise, here I am, with my Powerbook G4 fully working again!
--None of the suggested software remedies worked for me, so installing a new BT module was the only option for me.--

Phonegap build extension not available for dreamweaver cc trial

Trying to package up my application for android and ios and hit the problem of phonegap build service.
When on the addon page of Adobe, the link for phonegap build says "Free with subscription", therefore have to pay.
Yet everywhere on websites say that the addon is free for dreamweaver cc trial.
Any help?

still not available without subscription

My app store wont let me download apps, says they are not available in the uk please help??

my app store wont let me download apps, says there not available in the uk?? please help??

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Help! Infocube 0SEM_C02 not available

Similar Messages

Maybe you are looking for