HELP! Input source not registering built-in mic?

Hi all -
I'm trying to record with the mac's built-in mic, but the only input sources I'm offered are (built-in input)!
How do I get Garageband to recognize my built-in mic? I went to System Preferences and then to Sound and clicked on Internal Mic for the input source.
HELP!
M.

it depends on the CPU in your computer. assuming intel:
http://www.bulletsandbones.com/GB/GBFAQ.html#intelinternalmic
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

[SOLVED] ALSA input source not not saving on reboot

Just in case anyone else has a similar issue....
An annoying recent development was the ALSA input source not being restored on rebooting. In particular in my case the internal digital microphone on my Dell XPS m1330.
The audio chip is Intel-HDA, reported as "STAC9228" by alsamixer. The primary 'sound device' is alsamixer is listed as PulseAudio, with Intel HDA being an additional device (F6). Under the F4 capture tab, there are 3 input source options, the first kept on resetting to 'Mic' instead of 'Internal Mic 1'. Mic is the front analog mic jack, and as a result there was no Skype microphone functionality each reboot. Easy enough to use alsamixer to reset to the correct input when required of course, but annoying nonetheless.
I tried deleting asound.conf, ensuring alsa was (and wasn't) running as a daemon and using alsactl store, all to no avail. I already have !snd_pcm_oss and !snd-pcm-oss in my rc.conf, and Skype is not controlling any levels.
Finally solved by adding 'alsactl restore' to the startup programs (gnome-session-properties).
Last edited by sultanoswing (2011-05-17 00:56:27)

[UPDATE: Internal microphone no longer working under kernel 3.1.1-1 and alsa 0.24-3.]
Sigh.

Thai input source not correct

Thai input source is not correct. I do have a dual keypad and did not have a problem on Mavericks OS.....Please help

In order for anyone to help you, you really must provide some more detail regarding "not correct". Exactly what keys are not producing the results you expect?
Also it is vital that you tell us which Thai layout you are using, since there are at least 2, Thai and Thai - PattaChote
Finally you should tell us what app(s) you have the problem with. Note that MS Word for Mac is a special case as it does not officially support Thai.

Please help me. ipod not registering

Hi
My ipod charger broke so I havnt used my ipod for a while. When I pluged in my ipod to my computor it said that it was corrupt and needed to be restored. So I tried that and my computor crashed. Now when I plug it the do not disconect thingy comes up on the ipod but my computor doesnt register it at all. Please help me!!! Im going to my best friends party on Friday and desperately need it sorted by then. If you have any advise at all please reply asap.
Thanks in advance.

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
Then try with the iPod in forced disk mode.
Putting iPod into disk mode.
Still no joy, see if any of these articles help.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive

Re: HELP - "You are not registered for this servic...

Hi could someone help me my mom is having the same problem but the phone help service just keeps insisting it's a physical problem with our equipment when we can receive calls and use 1280 to make out going calls. Please help my mom isn't very technical and I'm trying my best to sort it for her.

Hi Sammymantha,
I've started you're own thread as the one you've posted on was quite old. I'm sorry to read about the problem with your Mom's line. Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll get this looked into. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Help needed - Macbook not recognising built-in iSight

Hi,
I have had my Macbook for 4 years and had no problems with the built-in iSight until today. I tried a Skype call and realised the green light wasn't showing. I looked in all files to see if the computer recognised it was there and - nothing! It would appear it has 'disappeared'!
I have tried the KB article stuff 2090 but it doesn't make any difference....
I am by no means any kind of computer genius and am totally stuck. If anyone could help that would be much appreciated.
Many thanks,
Gemma.
Message was edited by: gemmafromoxford

Don't know how or why but it's working again! Hopefully that'll be it!!
Thanks anyway for reading this!

Can't switch Input Source to built-in Mic

A few days ago I switched my Input source for a real track to "Stereo 1/2 Built-in Input" by going to System Preferences > Sound > Input and selecting Line-In because I wanted to record guitar. Now when I go back to System Preferences and select Internal Microphone, it picks up a signal in the System Prefs window, but when I open Garageband there are no options to switch the input source to the Built-In Mic again. It only lists options for Mono Built-In Input and Stereo Built-In Input. What do I do to enable recording with the built-in mic again?

http://www.bulletsandbones.com/GB/GBFAQ.html#builtinonly

How to get input source line number

I wrote a XSLT transformation that checks the input XML for errors.
When the transformer finds a problem, it can terminate with <xsl:message terminate="yes">, which outputs the line number within the transformer XML source. I do so in my implementation to indicate errors.
But i need to output the line number of the input source, not that of the transformer source, because this is the location of the error.
Anybody knows how to do this?
How can i get the current line number of the input source XML text?

Hello Fritz!
XALAN reads the entire input file (SAX) before starting with transformation.
So overriding the input stream is no way to find this line number.
I think this would have to be a built-in XSLT functionality within the tag "xsl:message".

Ventrilo on MacBook Pro with Built-In Mic

I recently installed Ventrilo 3.0.1 client and cannot get it to recognize my MacBook Pro's built-in mic. The software is working otherwise, as it connects to the server and I can hear others.
The MacBook Pro Sound control panel is set to built-in mic and the sound check is OK. In Ventrilo, the Sound Input is set to built-in mic and the Mute Sound and Mute Microphone Binds are unchecked. I turned the Amplifiers up but still got nothing.
The Ventrilo site's FAQ and setup guides have no info on the subject, and I can't find this exact problem on any of the previous posts in this discussion forum.
Thanks...

btw, I have already seen much ado regarding the external mic/headset difficulties people have had regarding non-amplified mics/headsets, and understand how to make that work, though I would like to know which USB headsets some of you have had success with, but I am wondering why the internal microphone wouldn't work.
I have seen some posts claiming that even USB headsets have difficulties under Leopard that they don't have with Tiger.
As Apple saw fit not to provide built-in playthrough from audio mini-plug line in, I have used the 3rd party LineIn software as a work around. Is there something else out there that gets USB headsets and Ventrilo to play nice together?

Audio randomly changing states - mute & input source

I think it was when I upgraded to 10.4 that my audio started randomly changing the state of mute, muting if it wasn't muted and visa versa, changing the input source, from line to internal mic and visa versa. For example, as best as I have noticed, it seems like when I do a file save in TextEdit maybe the sound will unmute or it might switch input sources. Strange! It is not consistent everytime and is not limited to TextEdit.
Any ideas as to what is causing this?
Message was edited by: Stephen Johnson

Don't remember now how it was corrected.

Built in microphone not working. Can't select the 'Input Source'.

I can't get the built in mic on my laptop to work, i tried any suggestion i could find on internet but i'm still stuck. I haven't used it before with windows or any other distribution so i can't tel if it's a new/old problem. I think the problem is that i don't have an option to select the 'Input Source' e.g. Mic or Front Mic as i saw in other's amixer controls/contents outputs.
Mine looks like this:
amixer controls
[root@myhost ~]# amixer controls
numid=2,iface=MIXER,name='Master Playback Switch'
numid=1,iface=MIXER,name='Master Playback Volume'
numid=18,iface=MIXER,name='PCM Playback Volume'
numid=4,iface=MIXER,name='Mic Playback Switch'
numid=3,iface=MIXER,name='Mic Playback Volume'
numid=5,iface=MIXER,name='Capture Switch'
numid=6,iface=MIXER,name='Capture Switch',index=1
numid=7,iface=MIXER,name='Capture Volume'
numid=8,iface=MIXER,name='Capture Volume',index=1
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=11,iface=MIXER,name='IEC958 Playback Default'
numid=12,iface=MIXER,name='IEC958 Playback Switch'
numid=15,iface=MIXER,name='Beep Playback Switch'
numid=14,iface=MIXER,name='Beep Playback Volume'
numid=17,iface=MIXER,name='Caller ID Switch'
numid=19,iface=MIXER,name='Digital Capture Volume'
numid=16,iface=MIXER,name='Off-hook Switch'
amixer scontrols
[root@myhost ~]# amixer scontrols
Simple mixer control 'Master',0
Simple mixer control 'PCM',0
Simple mixer control 'Mic',0
Simple mixer control 'IEC958',0
Simple mixer control 'IEC958 Default PCM',0
Simple mixer control 'Beep',0
Simple mixer control 'Capture',0
Simple mixer control 'Capture',1
Simple mixer control 'Caller ID',0
Simple mixer control 'Digital',0
Simple mixer control 'Off-hook',0
amixer contents
[root@myhost ~]# amixer contents
numid=2,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=64,step=0
: values=62,62
| dBscale-min=-64.00dB,step=1.00dB,mute=0
numid=18,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0
: values=249,249
| dBscale-min=-51.00dB,step=0.20dB,mute=0
numid=4,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=30,30
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=5,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=6,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=7,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=11,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=12,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=15,iface=MIXER,name='Beep Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=14,iface=MIXER,name='Beep Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=22,22
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Caller ID Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=19,iface=MIXER,name='Digital Capture Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=120,step=0
: values=90,90
| dBscale-min=-30.00dB,step=0.50dB,mute=0
numid=16,iface=MIXER,name='Off-hook Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
asound.state
[root@myhost ~]# cat /var/lib/alsa/asound.state
state.Intel {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 62
value.1 62
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -200
dbvalue.1 -200
control.2 {
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Mic Playback Volume'
value.0 30
value.1 30
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1050
dbvalue.1 1050
control.4 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.7 {
iface MIXER
name 'Capture Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.9 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.10 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.11 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.12 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.14 {
iface MIXER
name 'Beep Playback Volume'
value.0 22
value.1 22
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -150
dbvalue.1 -150
control.15 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.16 {
iface MIXER
name 'Off-hook Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'Caller ID Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.18 {
iface MIXER
name 'PCM Playback Volume'
value.0 249
value.1 249
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -120
dbvalue.1 -120
control.19 {
iface MIXER
name 'Digital Capture Volume'
value.0 90
value.1 90
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 1500
dbvalue.1 1500
state.HDMI {
control.1 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.2 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.3 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.4 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
alsamixer
Everything else related to alsa seems to work fine. If anyone has any ideea of what i should do/read/check please help.
Last edited by theother (2011-04-12 09:37:32)

Dreyfus2006, welcome to the forum.
I suggest going into Control Panel / Troubleshooting / Hardware and Sound / Recording Audio. You can run the troubleshooter to see if it finds the problem.
Also, have you uninstalled and reinstalled the microphone in Control Panel / Device Manger / Audio inputs and outputs? This may allow you to install the latest driver.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

The built-in mic in g50 122ca laptop model is not working. please help me out.

the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".

Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

Please repost on the CS6 part of the Audition Forums.

Line in / Built in Mic not working

Hello everyone. I've got an iMac G5 and for some reason it just doesn't want to accept any sound input.
The built in mic and line in both have the same behavior; no matter what I set the input volume to the bar never budges no matter how loud the sound is. The only time I even see the bar twitch is when I switch between the built in mic input and line in; sometimes I will see the bar flicker for an instant.
This problem was happening with 10.4.2 and hasn't been fixed by 10.4.3. Has anyone else experienced something like this?

Have same problem and have read entire thread. I
don't have LOGIC so could not try it. Only
difference with me is that my indicator shows input
from line and I can vary it with input source volume
controL. Just cannot hear it thru built in speaker.
Both MIDI and PREF set correctly. Need help from
anyone on this thread.
You will not hear sound automatically through your speakers. You need something to listen to the audio that is being piped in.
Try the program "LineIn" from:
http://www.rogueamoeba.com/freebies/
This should get you going.

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

HELP! Input source not registering built-in mic?

Similar Messages

Maybe you are looking for