Help! installed 10.5 - now no internet!
Hello
Up until yesterday I had a G4 tower running 10.3.9. The built-in ethernet card died sometime ago, so at the recommendation of the apple discussion boards I purchased and installed the Belkin brand PCI ethernet card - worked great for years.
Now, I have recently updated to 10.5, and my card will no longer function whatsoever. the computer does recognize that the card is there, but despite being hooked up to the working internet (i tested the cable modem and the cord - both work on my crappy PC laptop) the status says that the "cable is not plugged in" what can I do? i really would like NOT to have to downgrade just get my internet back.
thanks in advance
Jen
It is possible the belkin device needs a new driver to work under leopard.
Can you confirm what chipset the belkin device is using. In my experience the only cards that work flawlessly under any build of the mac os are devices that use a realtek chipset.
Given that you can purchase and generic branded NIC that has a realtek chipset for as little as £5 then you may just want to try a new NIC.
Failing that you could try and copy the ethernet driver from tiger and put in your leapard extensions directory.
Similar Messages
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !
recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
Sorry, I'm new to this, I installed IOS 7.1.1 on my iPhone 4s and now my internet and email is not working.
I have googled this on my computer and can't find any reference to this sort of problem.
I need help.
Thanks in advance.Try this:
Go to Settings > General > Reset > Reset Network Settings
See if you are able to connect now. -
I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.
Pogs78,
first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro. -
my itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!, my itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!
Hello leeminor,
If your iPhone is not seen in iTunes, please check out this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If you have already started reinstalling iTunes, may also want to check out this article for the recommended steps to remove and install iTunes correctly.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thank you for using Apple Support Communities.
Nubz -
I had an PC crash while backing-up my iPhone4, before installing iOs7.
Now I am unable to restore the iPhone.
Can anyone please help me!
Arjen RonhaarHey Arjen Ronhaar,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.
-
I have been working on installing this software for weeks now and am at the end. The first time the organizer installed but the editor wouldn't. I have uninstalled and reinstalled multiple times and am ready to take this application back to the store. I have a Vista machine.
It still didn't work. I paid for Photoshop 12 at Costco. The organizer downloaded just fine but when I tried to use the editor, the screen appeared asking for my Adobe sign on, I signed on, and then the application just churned. I had to use task manager to stop it. Per your instruction, I downloaded Photoshop 13 from the site, it downloaded fine and then asked for my Adobe sign on and then just churned. I can now access Photoshop 13 organizer but still can't get editor.
This is ridiculous. Last night I did the msconfig.exe and followed the instructions on changing the start up menu and disabling everything.
I am furious about this. It looks like you want me to pay for Photoshop Elements 13 when I can't get 12 to work. This is a Vista machine.
Elena Wright
Rajshree <[email protected]> wrote:
Rajshree created the discussion
"cannot install my costco photoshop 12 please help. it is now installing itself. Will take it back tomorrow."
To view the discussion, visit: https://forums.adobe.com/message/6870350#6870350
> -
I have a MB pro (10.7.5) and two PC's(windows 7). I am unable to ping either of PC through Mac. However, Both PC's reply ping made to each other and to Mac as well. Help me with this. Searched Internet. Cant resolve till now
Regards
MacIts.Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
is the reply m getting. -
I tried to update iTunes with the latest version and I got a message saying that - MSVCR80.dll was not installed. I think I successfully installed that through an online help website but I now get R6034 - C\Program Files(x86)\iTunes\iTunes.exe
Hello Bignige52,
The following article provides steps and information that can help get iTunes updated and working.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?
wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul -
I had beeen using Puffin browser for running flash player on my iPad2. Now the Puffin browser is not getting connected and I get a message saying that " A Firewall is installed between your device and internet". Can somebody suggest how to resolve this???
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?
What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
What is your display adapter, driver version & date? See http://forums.adobe.com/thread/945765 -
I installed ios7 and now I have slow texting I need help please?
Its new software, let the **** thing configure on the device
Maybe you are looking for
-
How can you get just an iPad 1? i cant find it on this site?
How can i purchase just an iPad 1 from this site? cant find it anywhere?
-
Unable To Include Files In iOS Package
Hi, I an using the latest release version of Flash Builder, trying to package an app for the iPad. I have an AIR application that I created to run on a desktop, and have modified it to run on the iPad. It works fine, however I cannot package the need
-
Spool report line width in background jobs
Hi All, I wrote a report and specified the line size in the report header: REPORT /sappssrm/option_handler NO STANDARD PAGE HEADING LINE-SIZE 185. I want to run this report as background job and get a spool list with results of the report. I expected
-
Hi, In the marketing documents the Profit Center & COGS Profit Center are auto populated while selecting the item. The problem is COGS Profit Center is wrong.. I think, The profit center codes are from the UDF's of Business Partner & Item master data
-
Large File Reading and Processing
Hi: Suppose I have a file much larger than my computer's memory e.g. say on a Windows XP system, the memory is 256 MB RAM and the file size is 1 GB on disk. Now if I want to create a File object and read from this file, is this possible to do? If yes