Help installing airbrush plug-in
I'm trying to install Kodak's airbrush plug-in on CS2. I've gone through all the download and installation steps and drag the plug-in to the filters folder. When I open Photoshop it doesn't show up in the toolbar. Support at Kodak has not helped. Any suggestions?
vicki kent wrote:
I didn't say it's a free trial version.
It always is —until you install it, input your serial/registration number and register it.
vicki kent wrote:
Photoshop CS2 9.0
You should update it to 9.0.2 ASAP!
vicki kent wrote:
Plug-in Download: Airpro 2.1 Universal.dmg
I didn't say it's a free trial version.
I've attached screenshots of each of the things you requested.
I'm not getting any error messages at any point. It just doesn't appear. I've trashed all previous downloads, several times, and started from square 1. I have Photoshop closed throughout the process. I've tried putting it in the filters file as well as the plug-in file.
I don't see the screen shots.
Vicki, the only other reason I can think of why it's not working for you is that you may have not observed and meticulously respected the default installation location for CS2.
Do not take the Photoshop application out of its folder, do not take the Photoshop folder out of your Applications folder, do not create subfolders in a misguided attempt to "organize" things. This will be even more important when you install CS4. Be sure to observe and meticulously respect the default installation location for CS4. Do not move things around, do not create subfolders to hide things in.
Similar Messages
-
Help installing VST plug-ins in Pr
Thank you in advance for your kind help.
I want to install a VST (audio) plug-in .dll for the Audio Mixer. I have read several things about this and I am just totally confused. Audition as an example has a Plug-in Manager which is a breeze. My plug-in works great there. However, I want it also for Pr on the Audio Mixer. Please help and assume I don't know anything. I am using Pr CS 5.5
Thank you,
TomHere is a thread that might help:
Audiounit/VST plugins not appearing in Premiere Pro CC -
Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy
Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team -
Plz help to install java plug-ins
hi everybody,
i am new to the world of java, i want to install java plug-ins in mozilla 1.7 on redhat linux 9.
how to do it, plz help, thanx in advance..If Java was installed prior to Mozilla, it should have automatically installed.
If not, or Mozilla was installed first, use these instructions from Mozilla:
http://plugindoc.mozdev.org/linux.html -
Help installing help desk plug in
I'm trying to install the plug in to modify the default help desk ticket views: https://community.spiceworks.com/appcenter/app/plugin_1454I'm running version 7.4.00070 of Spiceworks. The plug in says it works with versions 7.1+I've installed, cloned, edited and saved the plugin per the instructions. I didn't see the expectedchanges to the list view or menu. I cleared out my cache and tried again, no changes. I then restarted the Spiceworks service and still no changes. I uninstalled and reinstalled, cloned, edited and saved again, still no luck. I tried it on IE11 and Chrome, same thing. I'm tagging the creator of this plug in in hopes of getting some help. Thanks in advance!
This topic first appeared in the Spiceworks CommunityAdobe - Photoshop : For Macintosh
-
How to install optional plug-ins
I just read in the March issue of Photoshop User magazine about optional plug-ins you can download from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4048. It includes the Contact Sheet II plug-in among others. The article described how to install this plug-in but there are other things included in the Goodies folder that I'd like to install but not sure how. For example, there are textures but I don't see a textures folder where PS CS4 is installed. The readme file doesn't tell you how to install the features. Any help would be appreciated.
most things like textures, actions, brushes etc. can be loaded via the flyout menu in their respective palettes. the little triangle in the upper right corner? click that, you'll see "load textures" or "load brushes" etc.
-
How to install Impression plug in to aperture 3?
I just paid for impression plug in out of the app store. I need help installing it in my aperture 3.
Try to download the plug-ins from http://bluecrowbar.com/impression/
This will download a package to your downloads folder. Double click it to run the installer.
It will install the export plug-in in
/Library/Application Support/Aperture/Plug-Ins/Export/ImpressionExporter.ApertureExport -
How to install a plug-in to create a .ico file
I am new to Photoshop, I have CS6.
I want to create a .ico file, I understand I need a plug-in to do so, where do I find the plug-in to install?
Also, I have gone round in circles trying to find out how to install a plug-in. I didn't find the pdf help file very helpful on the subject.
Thanking you for any help.Try
http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html -
Can't use Adobe Extension Manager to Install Photoshop plug-in
I am trying to install a plug-in from PSKiss to Photoshop CS5 (version 12.0.4). I'm using Adobe Extension Manager CS5.5, and I'm running Windows 7 on my laptop.
Although I'm following up with PSKiss to see if there's a problem at this end, I also see an issue with Adobe Extension Manager. When I open it, the Install button is grayed-out. I can see neither of the plug-ins I've already installed in Photoshop, nor can I install anything new. I am running Adobe Extension Manager as Administrator—and I've tried every way I can think of to do that.
Also, yes, I'm using my laptop with an Administrator account.
What's going on? What am I missing? Please help if you can. Thanks!Hi Lisa, and welcome to the forum.
I don't know if the Extension Manager release notes would help you?
http://helpx.adobe.com/creative-suite/release-note/extension-manager-cs5-release-notes.htm l
There is a link to a stand alone EM at
http://www.adobe.com/exchange/em_download/
And a list of EM related help artiicles at:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=extension%20manager&cat=suppo rt -
Sometimes when I go to a site it wont let me open a windows media file and I get the following statement below. Is this something I can plug-in to Safari? Or is this file just for Windows. I have the app windows media 9 in my apps folder. Is there a plug-in for Safari also?
"Safari cannot find the internet plug-in
The page has content of MIME type video/x-ms-asf-plugin, but you dont have a plug-in installed for this MIME type. A plug-in should be available on this page:
http://www.microsoft.com/Windows/Downloads/Contents/Products/MediaPlayer/"The link you sent works for me. Under the Help > Installed Plug-In's you should see "video/x-ms-asf-plugin Windows Media " if Windows Media Player for the Mac installed correctly.
Did you try quitting Safari and then installing WMP? Does it work then? It's definitely using WMP, though, so I'm guessing it's a bad installation or something.
-Ryan -
Flash Builder unable to install Eclipse plug-in
With the latest pre-release version of Flash Builder (12/07/09), I'm unable to install Eclipse plug-ins. I go to the Help | Install New Software... menu option. But it gives you no ability to add a new software site. I also tried Window | Preference, expanded the Install/Update item and then selected Available Software Sites. This also gives you no ability to add a new site. What am I missing?
Wrong forum. You want prerelease.adobe.com.
Jason San Jose
Quality Engineer, Flash Builder -
How do I install the plug in version of flash player
how do I install the plug in version of flash player Why is the plug in version not listed
Try http://get.adobe.com/flashplayer/otherversions/
If that does not help: http://forums.adobe.com/thread/1195540 -
Can not install hana plug-in in eclipse
Hi All Expert,
I am trying to install eclipse plug in. From help->install software.But i got problem like following. Any idea about this problem?Hi Joshua,
Have you configured properly network connections (e.g. proxy?) according to your environment?
https://help.hana.ondemand.com/help/frameset.htm?76137a37711e1014839a8273b0e91070.html
BTW, I would recommend switching to Eclipse Kepler - Juno support will end soon.
HTH!
--Vlado -
Hi Friends,
While Installing Mobile Plug-Ins in the Netweaver IDE 7.1 I am unable to find the com.sap.tc.ap\comp folder which should be present there as per the configuration guide available at the link http://help.sap.com/saphelp_nwmobile71/helpdata/en/b6/0f5c4a07cd4bcdb58598760cb27766/frameset.htm.
Please Suggest.
Regards
NiteshHI David ,
The Procedure given in the tutorial has given the steps as shown below but they have not given the detailed steps that how can we create the
1. Data Objects ,
2. Create back-end adapters
3. Create associations ,
4. Activate the data objects and the back-end adapters in the DOE ,
5. Create a distribution model and Assign this distribution model to your test device
The tutorial discribes in the below shown manner .
1. Create an SWCV called ServiceOrderManagement.
2. In the ServiceOrderManagement SWCV, create the standard data objects: Customersand ServiceOrders.
The Customer data object must have the following attributes:
○ CUSTOMERID
○ CUSTOMERNAME
○ STREET
○ ZIPCODE
○ TOWN
○ REGION
The ServiceOrders data object must have the following attributes:
○ CUSTID
○ ORDERID
○ EQUIPTYPE
○ DESCRIPTION
○ PERC_DONE
○ HOURS_SPENT
○ MATERIAL
3. Create back-end adapters for the data objects.
4. Create associations between the two data objects: the CUSTOMERID attribute of the Customer data object must have as association with the CUSTID attribute of the ServiceOrder data object.
5. Activate the data objects and the back-end adapters in the DOE.
6. Create a distribution model for the data objects and activate them.
7. Assign this distribution model to your test device
Please suggest.
Regards
Nitesh -
My problem is that the jre isn't running, and when I try to download and install the plug-in, first it thinks it is already installed ( it was ) and tries to uninstall it.
I get the error message
ERROR # 0x80040702
Description: Failed to load dll:ActPanel
Setup will not terminate
It will not install the plug-in over the old one, and the old one is missing a dll ....Help! Where can I get this dll, and install it, or force the plug-in to install over the top of the messed up one!This is an InstallShield error. I Googled with the error code and found a number of hits, this looks promising:
http://www.planetblackandwhite.com/blackandwhite/techsupport/faq.shtml#installunhandled
I'd also suggest that you visit the InstallShield knowledge base.
Maybe you are looking for
-
I just purchased an APPLE TV. I also own a ROKU and found a great app to use instead of the included remote, is there a similar app to purchase for my new apple device.? I like a keypad to use when typing in info.also is there any way to get the Glen
-
I'm still a newbie... Is using the templates in Dreamweaver a bit (for lack of a bad word) "Lazy"? I have been coding my own layouts with CSS so far but was curious how good or bad making use of the pre-made DW templates are?
-
Can not refer to a field in the structure INCLUDE
Hi gurus, I have tried to declare an internal table like ( SAP standard ) DATA: BEGIN OF OBJECT_TAB OCCURS 0. INCLUDE STRUCTURE RQMQMEL1. DATA: SELECTED, PM_SELECTED TYPE PM_SELECTED, LIGHTS, "add some more fields END
-
Difference between poh and pov in module pool programming
hi all, pls tell me difference between poh and pov and how i check validation in screen
-
Partioned Hard Drive for Windows 7
When I partioned my hard drive to install Windows 7 I used 27 GB of space. Needless to say i should have allowed for more space. now i can not download my ms updates or install other window apps due to lack of space on windows hard drive. How to i