Help installing CB54G WLAN Card on Win98
HELP! I'm trying to install the CB54G onto a hewlett packard omni book 4150 with Win98 on it (German version). But when I run the CB54G install wizard, it exits with a 1723 error code, saying that I'm missing a dll or something. has anyone had this problem? does anyone know how to help me?
thanks,
Jordano
If you really mean T40, they'll probably chase you to another forum
I don't have a T40, but I just went over to lenovo support and downloads, entered T40, and this popped up:
Hardware Maintenance Manual - ThinkPad T40, T40p, T41, T41p, T42, T42p
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Help Installing​T40 Wireless Card
I ordered a wireless card for my T40, and have no clue where to install it. ANy help?
You can also watch the movie!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! -
Dell Inspiron 14R WLAN Card Disabled
Hello,
I have a Dell Inspiron 14R running Windows 7 64 bit. I have had my PC from this past November; about 7 months.
I was using my PC, and suddenly, I started to experience wireless problems. I was unable to get onto the internet. Other devices on my wireless network are able to log on to our network, although that is irrelevant because my radio wasn't picking up anything at all, when it always had from that same location. The connection worked fine using an ethernet cable. After the problem occurred, my Targus Bluetooth mouse also stopped working. This is what I have tried:
Going into Network and Sharing Center, disabling my network adapter, and then enabling it again. This usually does the trick. After doing it over 5 times, it never worked.
Doing a simple system restore. I attempted restoring 3 different times to an update within the last week, each of which failed (probably another issue altogether).
Re-installing my WLAN CARD Driver, and then restarting. This didn't solve the problem.
Checking the Device Manager. It reported that the wireless card was running properly.
Using the DW WLAN CARD Utility. It says under the Link Status tab, after Connection Status, Radio Disabled. I tried right-clicking the icon in my Notification Area, and then clicking Enable Radio. It then shows an alert saying "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it." Pressing Fn + F2, which is also supposed to enable the radio, did nothing, with no action or sign whatsoever from Windows. I also tried running tests under the Diagnostics tab. All hardware tests passed, with the Connection test giving me this alert again: "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it," and then failing. The same thing happened when running the CCX Client diagnostics.
What should I do? The problem is obvious that my card is disabled, as all signs point to that. Does anyone have any ideas on how I could fix it? I've tried everything I know, not to mention countless Google searches.
Thanks!I am experiencing the same issue with my Inspiron N4010. The network card has disappeared from the system devices. After a reboot, the network connected for about 15 seconds and then went away. I had the system devices displayed at the same time and the network card also disappeared when the network went down. The card worked fine until today. What is the cheapest route to fix this?
Also note the sound has come and gone over the past year. It is not working at the moment. It would be nice to fix both, but will the cost be greater than buying a new laptop or tablet?
I can't say I will ever buy a Dell product again. These laptops seem to only last a year or two. Even my more expensive work laptop which is less than a year old has had its motherboard and hard drive replaced. -
Not booting after installation PCI WLAN-card
I own a HP Pavilion Elite m9351.nl.
Recently I replaced the pre-installed Windows Vista Home Premium by Windows 7 Ultimate.
Since then the internal WLAN-card does not wake up from standby. Also replacing the driver with the newest Ralink-driver does not solve this.
Everything else works perfectly.
I removed the internal WLAN-card completely (including removing drivers) and replaced it by a PCI WLAN-card (D-link WMA-547). Now, the computer does not boot. The power supply, fans and lights all work, but the screen stays empty. Not even the HP-startup screen with boot options appears.
After removing the PCI WLAN-card everything works perfectly. When installing it again: nothing!
How do I install a WLAN-card and revive my computer?I have the same question: suddenly my HP notebook (Win 7) will not boot up unless I turn off the WLAN.
-
Satellite P10 - 304 can not install WLAN card
Hi, I have recently ran a recovery of my SP10 with the recovery disks i got with it. Since the recovery the internal wireless lan adaptor doesnt seem to be working... the light does not come on when i switch it on using the side switch and when i try to install the drivers with the tools and utilities cd-rom i got with the laptop i get the following message in a DOS window...
*** Installing 'Wireless Network Driver' ***
NG - Driver was NOT updated!
(INF file may be wrong or invalid)
NG - Driver was NOT updated!
(INF file may be wrong or invalid)
*** Installation failed ***
Press any key to continue . . .
any help or input would be much appreciated... thanks
Message was edited by: fetchHi
If the WLAN card is not listed in device manager it doesn`t persist for the system and it can not be installed. In your case there is no existing WLAN card. If you are sure that the card worked properly before please contact service partner. I assume that the WLAN card is defective.
Bye -
Wlan card undetected after windows 7 re install on dell inspiron m5010
i have a problem with the wlan card on my dell inspiron m5010 where it is not detected and the drivers are not being installed and always says "no compatible hardware found. The software you are attempting to install is not supported on this system" even though after putting the service code it says it came with the system. please help me.
Hi,
In the Device Manager, enter the Network Card Properties and provide the Hardware ID of the WLAN card. Also provide the Windows version currently used on the machine.Let me try giving you the right driver. -
Can not install WXP driver for WLAN card on my Satellite A200-14D
i have a problem with wireless driver for win xp
i installed win xp and the only problem is the wireless lan driver
help me pleaseWhat you mean it does not work? Can you install WLAN card or not? Is your problem WLAN card installation or you can not establish WLAN connectivity?
Please write a little bit more. Is so bad to write few sentences more and describe what happen exactly. Is there any error message or what? -
after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!
Hi David,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Tried resetting the PMU for PB/iB?
http://docs.info.apple.com/article.html?artnum=14449 -
Help me with installing This video card.
I really need help installing this card.. Everytime I go through installation it says
"The software that you are installing for this hardware:
MSI Radeon 9800 PRO Plus
has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this is important)
Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for the software that has passed Windows Logo testing.
Options: Continue anyway or Stop installation"
I click continue then this is what I get..
"Setup was unable to complete the installation.
Try to setup your display adapter with a standard VGA driver before running setup."
Please, Please, Please help me..Is this card an upgrade from something else? If so, you should uninstall the old drivers from the "add/remove programs" control panel, reboot with the new card plugged in, then hit "cancel" when prompted by Windows for drivers. Then run the driver installation program.
As for the "windows logo" question, Windows XP likes to ask for digitally signed drivers as proof that they meet certain criteria set by Microsoft. It's not usually a big deal.
If you're installing the drivers from your CD, you may want to grab the latest Catalyst drivers from ATI instead http://www.ati.com/support/driver.html -
Ideacenter K300 help - Installing a PNY 8500GT Graphics Card
What is the proper procedure for installing this graphics card into the computer...
I did install it but the Computer really did not like it.....would not boot up....
is there a step I am missing?
HELP!you have a 280w psu which might not work with the gfx card
Minimum System Requirements
Intel® or AMD® compatible motherboard
At least 512MB system RAM
A minimum 350W system power supply
A PCI Express® compliant motherboard
50MB of available hard disk space
CD-ROM or DVD-ROM drive
Microsoft® Windows® 2000, XP
VGA or DVI-I compatible monitor
it req a 350w psu but most of the time you can get away with less but as with most pre built pcs they come with cheap psus so you might need to upgrade the psu
try unplugging any extra fans hdd as see if you can get it to post
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems -
Does Satellite P20-S303 has a WLAN card already installed?
I WANT TO FIND OUT IF THE ABOVE NAMED NOTEBOOK COMES WITH A WLAN CARD ALREADY INSTALLED.
COS I DONT SEEM TO FIND ONE ON MY NOTEBOOK, YET THE INDICATOR AND SWITCH ARE AN THE MACHINE.According the notebook specification WLAN must be inside. Every notebook delivered with WLAN card has Wi-Fi sticker at the bottom side.
Check it out! -
i install 50$ redeem card in my account and i used only like 13$ but today i opened my app store and i was shocked coz i only found 0.07$ i want to know who used my money please help me
Make sure you are using the correct account if you have more than one.
Purchase history won't say who actually logged in because of course it will be a person using your ID and password.
Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727 -
Pl. help me install a PCI card in a solaris 2.6 system
Hello,
I am working on a cpci chassis with Sun CP1400 processor card running Solaris 2.6. I am trying to install a voip card from AudioCodes. After installing the driver, and the card, the software doesn't seem to recognize the board.
I ran "show-devs" from the ok prompt. It doesn't list the card. Also, there is no entry for the driver in /etc/driver_aliases. I am not sure if the board is faulty, or the driver is not properly installed.
The driver.conf indicates its a pseudo driver (I dont know if this makes any difference). When I run pci_scan that came with the driver it listed a device on the bus with vendor id = 0x10b5. I think this is the plx chip on the card. But I don't see any AudioCodes vendor, and device ids in the list.
Thanks for your time.
Sridhar
[email protected]It is possible that this card may not be compatible with this Solaris
system.
You may want to check these sites out for driver related information:
http://soldc.sun.com/developer/support/driver/
http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html
Thx
Tushar Patel. -
An error message after I install my sound card
I have one of MSI product. K7N2G-L (MS6570) mainboard for AMD processors. It's bios version is 3.5 (I have flashed it because of the CPU temprature measurement problem, now it show 20 C lower temprature of CPU than it was. Is this normal?).
My operating system is Windows 98 SE. After I install window I install my sound card. My sound card's model is Creative Sound Blaster Live Value. But after I install Nvidia nforce system drivers and my sound card drivers, whenever I reboot my computer I see an error message. The message is:
" EMM386 not installed - unable to set frame page address "
and after this message there says: press any key to continue.
In fact, after a while Windows 98 starts, even I don't press a key. Why I see this message and how can I prevent to see this message. What is wrong? What should I do?
If you can help me about this problem I will be so glad.Hi..
I am not sure but this might be one of those DOS drivers that load off the autoexec.bat.. (COs win98 does not use emm386 for extended memory managenent)..
Try this... Go to the MS-DOS command prompt, type
C:
CD
NOTEPAD autoexec.bat
And search for a entry that is referting to a file in the Live installation directory and add the words REM infront of it...
Ex.
C:LiveLoad.exe
make it
REM C:Liveload.exe
Chances are u will not be needing this file to get audio in the system...
Good Luck
Rasika
[EDIT]
Try putting rem infront of entry in the audoexec.bat.. u sould be able to catch it easyly -
Resource Conflict with PCMCIA Wlan Card on boot process
- Did switch off the onboard wlan card in win and also with the switch near the onboard wlan.
- Did flash the newest bios version
Seems to be that the problem is in the loading process.
Is it possible to switch off the onboard card in the loading process? Even if I am sure that it must be possible to have both cards installed?
I am realy looking forward to get some help.
A pitty that there is no chat.No, as far as I know you can disable only the LAN card and not WLan card.
The WLan card can be disabled in the device manager.
But did you try to change the BIOS options for the PCMCIA card.
I dont know what notebook you have but the Toshiba BIOS provide configuration options on the second page.
If the Device Config is set to All devices you will be able to change the PC card controller mode to: Auto selected, PCIC compatible or CardBus/16bit
If it does not make any improvements then I assume there is nothing to do
Maybe you are looking for
-
How do I write an OutputStream to a String?
I'm using an ObjectOutputStream to serialize a LinkedList. I tried using a ByteArrayOutputStream and invoking the toString() method thereof, but it changes the first two entries in the array and throws off the readObject() method of the ObjectInputSt
-
Mapping List Complex Types in BPM (unbounded)
Hello, I need help in how can I map a list of complex types in BPM. I have a list of products that brings a web service that I have to map to the process context. Both types have the same elements, but the process context BPM shows me an error be
-
What is the meaning of 'WE' and 'RE' in FI?
developing a report in FI what is the meaning of 'WE' and 'RE' 'KP' 'SA' in FI terms?
-
Weird Msg after repairing permissions
hello I am on Lion OS, I repaired permissions and got the following message Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. What is it.? and do I fix
-
i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa