Help...Installing Mac X Tiger for first time.
I have been in the shadows running OS 9.2.2 refusing to jump on the OS X band wagon. Well, all that is about to change. I have one concern. I use Microsoft Outlook Express as my email client and I'm worried that installing Tiger will wipe out all my very important emails. I was hoping to back up my emails but outlook wont let me save them off the program. Will Tiger delete all my emails or is there a way to save them?
Did you tell him you had an Intel Mac or just a Mac? If the former then you were misinformed by the person. If the latter then you didn't provide sufficient information so they thought you meant any non-Intel Mac.
Do you have two gray label DVDs that should have come with the computer? They will say OS X Installer Disc One and OS X Installer Disc Two. If you don't have these you need to contact the seller and have him/her send them to you. They should come with the computer and you are entitled to them.
You can return the version of Tiger you purchased and have your money refunded. Just explain that you thought it would work on an Intel Mac and now realize that's wrong. Or tell them the sales person misinformed you.
Unless you have the installer discs that come with the computer you cannot reinstall OS X. If you cannot get the discs from the eBay seller then you will have to call AppleCare and see about purchasing replacements.
Similar Messages
-
Mac 10.9.5 trying to launch Illustrator CS6 for first time and won't launch, prompts for Java 6 even though I have Java 8 installed!
Apple says Java 6 is very insecure and not to use it. I have the latest Java installed. Why won't Illustrator launch? What else can I do?tm,
I believe you should be able to get round the issue by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469 -
Itunes application error when attempting to open for first time. HELP
Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.
You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium -
help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.
Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.
-
Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security question
The Three Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
HT1178 I'm setting up airport for first time. I'm getting error no DNS servers help
I'm setting up airport for first time. Getting error no DNS servers. What is DNS server and how do I fix this?
DNS server is that translation from a website address in words meaningful to us.. eg www.google.com to an actual number that computers can use. Without DNS the internet may work but you would have to know the ipv4 address of every site you want to visit.
Whenever you don't know the meaning of a term just type wiki plus the term in google search.
http://en.wikipedia.org/wiki/Domain_Name_System
We cannot really help fix the problem without knowing a good deal more info.
So
What modem do you have.. make and model may be a help?
Who is your ISP.. may be helpful??
Is the modem also a router?
How is the TC connected to the modem?
How is the computer connected to the TC?
A primary example of where you get this problem is a pure cable modem.. ie has no router in it.
When you replace an existing computer or router that is plugged into it, with the TC, requires that you power cycle the modem. In some cases the off time is 5min.. for a lot of services, it needs to be off 20min.. and for some even longer.. maybe an hour or overnight.
But it is not worth getting into specifics without knowing the rest of the system. -
Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help
Reset your device by pressing the home button along with the sleep/wake button until you see the apple, then let go.
-
What should I do to setup a new MacBook pro for first time when moving from a PC?
What should I do to setup a new MacBook pro for first time when moving from a PC?
you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796 -
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
Error when launch MaxDB studio for first time
Dear, Experts
I faced with one issue for launch MaxDB studio for first time.
It reported:
Connect user failed
SAP DBTech JDBC: Cannot connect to jdbc:sapdb://.../.UMDB [Restart required].
Creating default user management failed
Could not create database ".UMDB": [C:\sapdb\clients\DatabaseStudio\pgm\dbmcli.exe] > ERR, -24832, ERR_SHMNOTAVAILABLE ...
Could you please help me on this?
Thank you in advance.
Best RegardsIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas. -
using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor. -
Lov is not validating when i open a form for first time
hi all,
i am using form6i.
i have one multi record block. in which lov is attached to it.
but when i open the form for first time the item corresponding the above said is not showing and if i enter the value then also its not validating against. its showing error frm-40210
but when i click on other item and come to this item Lov is showing.
what could be the reason for this strange behaviour.
i have checked set_item_properties too(there is properties have been set)
Please advice.
Thanks..FRM-40210: Search string not found.
what could be the reason for this strange behaviour.Do you have an "Initial Value" set for the item? Do you have the "Validate from list" property set to yes or are you setting the initial value through code?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Error when booting app server for first time
Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PMIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.
Maybe you are looking for
-
How to get the schema in a windows machine?
In Active Directory, we can see the schema using AD schema snap-in.The following link gives the step to be done to view AD schema : http://technet.microsoft.com/en-us/library/cc732110.aspx Similar to this how can we see the schema of local users and
-
How can I recover a .psd file that photoshop says is 'empty'?
I've been working on this file for a long time, then I tried to work on it tonight, and Photoshop gave me a message that said "Could not complete your request because the file is empty." I have no idea why this happened and I really don't want to ha
-
What are exit code 6 and exit code 7
Since the event this afternoon, I have been trying to update the products in CC to 2014. I keep getting an error without being able to finish installation and get either of the exit codes 6 or 7. I have tried to troubleshoot by changing to IE (my d
-
HT1212 what do you do if you ipod is locked for 22 million minutes
trying to restore to wont let me as my brother has locked my Ipod for 22 million minutes
-
HI, I wnt to map following scenario :- We are having a bar of length of 5000mm(A) We want to cut it in two bar 3000mm(B) and 2000mm(C) Material master for all 3 material were created. I am creating a PO for 3000mm (B) with item cat L In component I a