Help installing MSI 5600XT-TD 256MB

As you can see in my sig, I currently have a PCI card. This is my first AGP so bare with me.
1. I did not install the AGP driver yet because I was only using a PCI video card. Should I install the AGP driver first before I do anything? I found this driver from the MSI site (SiS AGP Driver version: 7.2.0.1170)
2. Can you tell me if the bios settings are correct: AGP Aperture Size = 256MB and AGP Fast Write = Enabled?
3. Do I need to delete/remove the current video card from the Device Manager? My PCI is also a Geforce so I'm wondering if I can just remove the PCI card from the mobo and install the AGP card without doing anything in the Device Manager.
4. MSI site has the 56.63 driver while Nvidia site has the 56.72. I know it's obvious that the nvidia driver is the latest one but it is safe to use it.
Thanks in advance.

BACK UP YOUR FILES
1 Download the latest nVidia Drivers not MSI drivers. Go ahead and get the SIS AGP Drivers to have on hand..just in case. You should check Device manager to be sure they are installed. They should be, regardless but you never know who set it up before or what they did.
2. Go to http://www.driverheaven.net and download the utility called "Driver Cleaner" Read the instructions, review them again and then follow them for driver removal.
3. After the drivers have been removed via the Add Remove applet in control panel and you have followed the directions and used the driver cleaner utility, instead of a restart, shut down.
4. Remove the power cord from the back of the power supply and press the power button on your case to purge any remaining power stored in the capacitors or the power supply.
5. Making sure you take proper precautions for ESD and ground yourself by using a ground strap or by touching the chassis prior to handling any cards or components, Remove the PCI card and install the AGP card.
6. Button it up, replace the power cord and power up the PC and enter the BIOS immediately.
7. Change the setting for initializing the PCI card for video to AGP. AGP Aperture size should either be 64MB or 128MB. Try 64 MB first. Make sure 8X is enabled. Turn off any BIOS caching, shadowing etc. Save settings and exit.
***8. Once the PC boots to desktop, the Hardware Wizard should appear, ignore it, but don't close it, just leave it alone. Make sure your Antivirus program and any other backround apps that are not needed are terminated.
9. Go to the location where you saved the drivers you downloaded and dbl click on the file and begin the installation. If you have problems with the installation or strange problems while scrolling in IE etc. Or 8X doesn't show up in the control panel for display properties, then you can run the SIS AGP drivers.
*** In certain instances in the past, even after removing drivers and restarting XP would replace drivers with it's own version of nVidia driver and bypass the Hardware Wizard and cocking up the installation of proper drivers. If you don't see the Hardware wizard after a restart then consider turning off Sytem Restore and then run the Driver Cleaner again. Cover your butt if you decide to do this and back up your data.

Similar Messages

I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

MSI 5600xt serious troubles!

i have an MSI 5600xt card that i am having strange problems with....i find that it works fine with standard VGA drivers,ie just browsing windows,the net ans stuff....but no games can work obviously.now.my trouble strarts whenever i install any NVIDIA drivers,after installing and restarting it freezes after post or just gives a jumbled image but doesnt take me near to the desktop.but go back to safe mode and it loads up fine!...
ive tried several different forceware driver packs,some omega drivers,even older detonators..some giving different results after post but none making it to the desktop..i'd like if possible to try flashing the cards BIOS in the hope that this might work,but i cant find any to download on the main site and live update isnt offering me any either? is there another place i can get VGA BIOS updates or am i screwed?
thanks for ya time
LeMe

MSI 875P NEO FISR FSB 800 HT BIOS V3.1
INTEL P4 2.8 prescott @ 3.15 FSB800 HT
MSI NX 6800GT(copper sink ver.) o/c 375mhz .6177 MSI Drivers
Kingston DDR400 DUAL CH 1GB
HDD Maxtor D'Max9+ 120&160 GB 8M cache
DVD Pioneer DVR 107
Onboard sound 8ch surround, 33ch Realtek AC'97 Audio
COLORSit 550w PSU (PCF)
3DMark 01: 19121
3DMark 03: 11847
3DMark 05: 4204
Aquamark : 60656
_____GFX : 8958
_____CPU : 9388
You will prob get better help if you show what else your equip. is like above

I need help installing air on win xp sp3

I uninstalled air a couple of months ago and something went wrong to the point that air will not install again. I assume some piece of code or file is left over. Air does not appear in the control panel to uninstall it there.
Here is the most recent install attempt log:
[2012-08-09:00:49:44] Runtime Installer begin with version 3.3.0.3670 on Windows XP x86
[2012-08-09:00:49:44] Commandline is:
[2012-08-09:00:49:44] No installed runtime detected
[2012-08-09:00:49:47] Starting runtime install. Installing runtime version 3.3.0.3670
[2012-08-09:00:49:47] Installing msi at c:\docume~1\owner\locals~1\temp\air314.tmp\setup.msi with guid {65CB4C08-C47B-4A7E-A6A4-50C06ADA5FC6}
[2012-08-09:00:49:47] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-08-09:00:49:47] Rolling back install of c:\docume~1\owner\locals~1\temp\air314.tmp\setup.msi
[2012-08-09:00:49:47] Rollback complete
[2012-08-09:00:49:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
What is msi?
Can anyone help clear this up?
Thanks ahead of time.
Kirt

I'm sorry you're running into installation issues with AIR. Microsoft has released a utility that can help resolve installation problems. Would you mind giving this a try and let us know how it works for you? When running the Fix it, go through the uninstall process and try to remove Adobe AIR from your system. This might be problematic given that you no longer see AIR in the control panel, but try it out and let me know.
Microsoft Install and Uninstall Fix It
If your unable to find AIR listed in the MS utility, we'll need to review the AIR installer MSI log to better diagnose the issue. You can find instructions for generating and finding these logs here:
AIR Installer Log Instructions

I can not uninstall the newest Muse, the error that i get is: ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group. ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installat

Can somebody please help me, i can not work on my websites anymore. Thanks !!

ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603

Help Installing Adobe acrobat XI

During my install I keep getting a failed install
This is the error I get. Any help out there
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1406.Could not write value Adobe ARM to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value Adobe ARM to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Terry

Code 6 code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Install MSI as restricted user?

I have set up an Zenworks desktop management agent MSI package which
installs fine when it is associated to a normal user (when set to force
run). If I want to do a force run when associated to a workstation
group it wont work, you have to double click the icon after it has been
cached. This isnt really how I would like it, I would like it to
automatically install.
1, can I get this to automatically install when associated to the
workstation?
If I have to get a user to click on the icon it will work fine for a
normal user but on certain users they have a restrictive policy which
says they are not allowed to install stuff so when they have the icon
popup in their NAL window (because its associated to that workstation)
and click it, it returns an error of 1625 (a restrictive policy is
stopping the installation)
2, Is there anyway around this?
Thanks
Total5

How could I copy to the c:\temp and then delete it? I am trying to do an
automatic install without any user intervention so I can push this out
over night, but I will definatley give the unsecured system user ago.
Cheers
Israel De Leon;2694744 Wrote:
> What if you first copy the ZFDAgent.msi to C:\Temp and
> then continue in installing locally. Then after the install,
> delete the msi from the Temp directory. You can also run it
> as an unsecured System User, which will temporarily
> allow the Admin rights.
>
>
> >>> On 4/5/2007 at 11:10 AM, in message
> <[email protected]_engineer.com>,
> Total5<[email protected]_engineer.com> wrote:
>
> Craig, thanks for the reply
>
> There are a few more bits of info since my last post.
>
> 1, the msi is on a NetWare share and yes it is a UNC path to it
>
> I have been trying a few changes whilst trying to get it running and
> itis set up now as....
>
> Assocaited to workstations and set to Force cache, Force run, and
> showin NAL
>
> It is set to pre install of schedule type none
>
> It has MSI properties for our middle tier address etc.......
>
> Everything else is standard settings. (the app I am doing is The
> ZfDagent)
>
> I have now had some luck installing this on our LAN. If I associatethis
> to a user with the settings mentioned it will install itself asexpected
> (without any user intervention)....great!
>
> But...
>
> If I want to associate it to workstations (which I do) it will cacheand
> then I have to run the NAL icon which will then distribute thepackage,
> really I could do with this happening automatically. I havesome users
> which have group policies applied to them, of which one ofthem is they
> are not allowed to install msi or exe's.
> So, if one of them users is on a workstation which needs the NAL
> iconclicking it just returns a MSI error code: 1625
>
> Now here comes the best bit......
>
> When this is done over the WAN I am getting different error codes
>
> These are associated to workstations
> 1, Installed as a restricted account - error code 1625
>
> 2, Installed as (admin user in NDS) restricted on the workstation
> -error 1612
>
> 3, Installed as (standard user in NDS) restricted on the workstation
> -error 1603
>
> 4, Installed as (admin user in NDS) admin on the workstation -
> error1612
>
> And this one, associated to admin user in NDS and admin on
> theworkstation - error 1625
>
> Hope any of this helps?????
>
>
> Craig Wilson;2671674 Wrote: > can you post the details of the MSI app
> you are trying to install?
> >
> > Is the MSI on a NetWare or Windows Share?
> > Are you using a UNC path to specify the path to the MSI install?
> >
> > Have you made other configuration changes to the app from the
> default
> > settings that may be noteworthy?
> >
> >
> > --
> > Craig Wilson - MCNE, MCSE, CCNA
> > Novell Support Forums Volunteer Sysop
> >
> > Novell does not officially monitor these forums.
> >
> > Suggestions/Opinions/Statements made by me are solely my own.
> > These thoughts may not be shared either Novell or any rational
> human.
> >
> > "Total5" <[email protected]_engineer.com> wrote in message
> > news:[email protected]_engineer.com...
> > >
> > > I have set up an Zenworks desktop management agent MSI package
> which
> > > installs fine when it is associated to a normal user (when set to>
> force
> > > run). If I want to do a force run when associated to a workstation
> > > group it wont work, you have to double click the icon after it has>
> been
> > > cached. This isnt really how I would like it, I would like it to
> > > automatically install.
> > >
> > > 1, can I get this to automatically install when associated to the
> > > workstation?
> > >
> > > If I have to get a user to click on the icon it will work fine for
> a
> > > normal user but on certain users they have a restrictive policy>
> which
> > > says they are not allowed to install stuff so when they have the>
> icon
> > > popup in their NAL window (because its associated to that>
> workstation)
> > > and click it, it returns an error of 1625 (a restrictive policy is
> > > stopping the installation)
> > >
> > > 2, Is there anyway around this?
> > >
> > > Thanks
> > >
> > >
> > > --
> > > Total5-- Total5
Total5

Error: Install MSI Payload failed with error: 1635 / ERROR. DW050: - Acorbat Prof. Install failen

Hi all
I have bought Adobe Creative Suite 6, Master collection on DVD (with various Adobe-Products
Iwork with windows XP (SP3, German)
The error-log shows various WARNINGS and 2 Errors to Adobe Professional 10.0.0.0
- Install MSI payload failed with error: 1635 -"Das Patchpaket konnte nicht geöffnet werden. Stellen Sie sicher, dass das Patchpaket vorhanden ist und das Sie darauf zugreifen können oder wenden Sie sich an den Hersteller".
-> The patch-packet can't be opened. Make shure that the patch-packet is available and you can access it or contact the vendor"
- ERROR: DW050: Acrobat Professiona: Install failed
Adobe Professional was not installed, the other products are installed now
Very nice..
What can i do now?
Help please

Hi Mylenium
Thanks for your fast replay, but...
=> Do i have to deinstall the Software first (windows - software)?
In the description to the tools is explicitly a note that the tools should not be used with the creative suite (see below):
=> Is that a wrong information?
Thanks
IMPORTANT: THIS TOOL IS NOT FOR USE WITH ANY CREATIVE SUITE PRODUCTS INCLUDING SUITES THAT CONTAIN ACROBAT. IT CAN ONLY BE USED WITH STANDALONE VERSIONS OF ACROBAT AND ADOBE READER.
English
Download Adobe Reader and Acrobat Cleaner Tool for Windows (ZIP, 702 KB)
User Instructions
Follow either the User Interface Workflow or the Command Line Usage instructions below to use the Adobe Reader and Acrobat Cleaner Tool. Once you are done, please send us your comments and let us know about your experience.
User Interface Workflow
Do not proceed if you installed Acrobat or Reader as part of Creative Suite. This tool can only be used with standalone versions of Acrobat and Reader.

MOVED: Need help with msi mega 180 + athlon xp-m combo

This topic has been moved to Overclockers & Modding Corner.
Need help with msi mega 180 + athlon xp-m combo

AFAIK, you shouldn't need a pinmod for a Mobile Athlon XP CPU to work in a nforce2 mobo
did you have any other CPU installed prior to this one? if so, refer here to clear the CMOS: Clear CMOS Guide
next, refer to your manual, or download from MSI, for location of the FSB jumpers; ensure J8 is shorted across pins 1-2, and J7 is shorted
finally, enter your BIOS setup menu, and under Advanced Chipset Features, set CPU FSB to 133mhz (or even 166mhz if you have DDR333 memory). the only thing i can't see in the Mega 180 manual is where you set the multiplier...
which is where the BIOS has limited overclocking features, and you might have a problem here
i think i'll pass this over to the Overclockers forum, where someone may be able to give a better answer....

Error 259 deploying Install MSI action

Long time ago it was supposed to be fixed
Support | Error 259 deploying Install MSI action
I am sure that bundle in question (Autocad 2011 Deployment install from network with credentials &
dynamic admin) worked fine in 11.2.2
After upgrade to 11.2.3a it gives me this error & fails
Not really helpful
(and please do not advice me to install it by copying it to local machine, I
am not interested in this)
Seb

Originally Posted by AndersG
GarethWilson,
> Autocad was running as dynamic administrator and not SYSTEM, and its
> defo a zenworks issue, if you take the same command line that you have
> in the zcm bundle and then put that in a batch file and run that as
> dynamic administrator the application installs fine without
> errors.....its only when the command line is in the zcm bundle the error
> occurs.
OK. If that is the case, then it sounds like a bug. Can you open an SR to
have it looked at?
FWIW, running Procmon, once for the ZCM bundle and once for the batch and
capturing logs might provide some additional info.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms
There maybe just something in the autocad installer that doesnt like being called from the zen agent, it wouldnt be the first time a company has written a dodgy setup process lol what we found also was that if you put in /W in the autocad commandline which is a switch for SCCM then the installer behaved correctly, so i think the issue is actually with their installer rather than zenworks now.

I need step by step guide to install MSI package through group policy

I need step by step guide to install MSI package through group policy its about.
I tried a lot using software deployment with GPO but its not happening may be I am doing mistake I am not getting.
help.
Thanks,
Mohan

Hi,
Maybe we could refer to the following Microsoft KB article for
detailed information about how to use Group Policy to remotely install software.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Help Installing OSX Tiger on iMac G4, seems HD Volume Structure corrupted

I need help Installing OSX Tiger on an iMac G4 800MHz 17" Flat Screen LCD, 80 GB Hard Drive, 256MB RAM, DVD-R/CD-RW Super Drive, model# M8812LL/A. I have a Tiger install DVD and i put it in the drive and everything is fine....I go through the steps and when it gets to "Preparing the Disk" - "Verifying destination volume"....it just sits and nothing happens. It will go on for 20+ minutes or so and then the installer will quit saying there was errors during the update. Anyone got any idea what is happening? I'm running OSX 10.3 Panther currently. I just tried running Disk Utility using the install DVD.....it attempted three times and couldn't repair --- I then went out and purhased DiskWarrior --- I boot from that disk, it begins to run; then as it is repairing the volume it freezes and stays frozen for hours. I've rebooted and tried it numerous times with no luck. Is the HD no good? Should I just do a complete reinstall of Tiger and erase everything? I'd rather not, but I backed everthing up in case I need to. Also, when I ran TechTool Deluxe from the booted CD, it said the Volume Structure was corrupted. My Tiger disc is a retail full install disc that I purchased.
Thanks for your help!!!

Use Disk Utility to Restore to a FW drive.
Use one of your FW drives, and create a 24GB partition - later you can reuse this for your emergency boot drive). Restore the DVD to FW volume. Boot from there to install with - very fast.
Low level format is what you probably want/need and the only way to do that is ERASE with the option to ZERO-ALL (after you backup any files you don't now have on disk or DVD.... and where are the backups?).
When you install it will also verify the DVD install disk itself.
Have you tried using FSCK from the command line? Or do you no longer have a valid system on the boot drive? Nothing to lose it seems at this point from trying. Just hold down COMMAND + S on startup. At the prompt, follow direction to type:
/sbin/fsck -fy

Another topic for MSI NX 7600GS 256MB AGP driver problems

Seems that some of users are having troubles of installing new drivers for NX7600 display adapter. Only drivers supplied with install cd will work with this card. Any other drivers, including MSI’s wont recognise the card.
My system is following:
OS: Windows XP Professional 5.01.2600 Service Pack 2
Mainboard: Abit Kv8 (VIAK8T800P-8237)
BIOS: Phoenix Technologies Ltd.
Powersupply: HEC POWER SUPPLY 350MR (+3.3V/28A, +5V/33A, +12V/18A, -5V/0.5A, -12V/0.8A, +5Vsb/3A)
Processor: AMD Athlon 64 3200+ @ 2200Mhz, Socket 754
Memory: DDR 400, Total 1024mb, Kingston KVR400X64X3AK2/1G (Kit 2x512mb) 1GB PC 3200 CL3 184
Video Card: MSI NX 7600GS 256mb (Agp, with Nvidia Geforce 7600 Chipset)
Hard Disk (1): Maxtor 40gb
Hard Disk (2): Samsung 8gb
DVD-ROM Drive: NEC RW ND-4571A
Network Card (motherboard): VT82C570 MV IDE Controller VT3119 Rhine-GE Gigabit Ethernet Controller
DirectX : Version 9.0c (december 2005)
I´ve being requested to force install Nvidia drivers, but since i have owned several NVidia (TNT2, Geforce 2 Gts, Ti 4800, Fx5900, 6600gti) display adapters, and NEVER i havent had to force install ANY drivers, i am wondering why i have to force install drivers for this display adapter? Why is it so with the Msi? I hope that this product isn´t that bad.
By the way can i have instructions for force installing drivers, if i have to do it. I hope that Msi will give drivers that will work with this card.
Yours,
Samuli
Finland

Yes, beta drivers worked for me also! It seems that Nvidia has some sort of bug in it´s latest official forceware release, it does not recognise 7600gs agp display adapter. But i think and hope it will be fixed in future release, before that i have to use beta or the older drivers supplied with msi card. Thanks Yoppy for the tip! By the way you reported that you have video problems with beta drivers, i dont have such problems, div-x and every video file has worked fine so far! So you have to wait for the next release of new drivers.
Yours,
Samuli
Finland

MSI FX5600XT ULTRA 256MB Graphics Card

Hi All,
I have just bought a MSI FX5600XT ULTRA 256MB Graphics Card
Just a few questions -
1) Do the latest 5303xp drivers work well with this card, is this card supported
2) Does DX9 work well with this card or is it better sticking with DX8
Any advice , suggestions or help would be greatly appreciated
Thx,
stts

make sure you use the drivers from nVidia
http://www.nvidia.com/content/drivers/drivers.asp

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Help installing MSI 5600XT-TD 256MB

Similar Messages

Maybe you are looking for