Help installing on second computer

I have creative suite 5.5 Design Standard installed on my iMac desktop, and need to install it on my new laptop. When I download and try and install I get to a section where the program asks me to input a qualifying product. I cant remember the information I used during the original install and any other products have been dumped after I purchased the new one. Can I get the information used in the first install somehow? FYI, whatever product code I used during the first install is not on my registered list.    

You get that message when you're installing an upgrade. If the installer doesn't find a previous version on the computer, it prompts for the serial number of the previous version. If you registered your serial number, it will be listed in your Adobe account online.

Similar Messages

  • Install on second computer

    when I try to install lightroom on a second computer it says my serial number is invalid. how can I get it installed on my new computer?

    I don't have a disk. I bought Acrobat X Pro online.
    In a message dated 3/1/2014 8:43:53 P.M. US Mountain Standard Time, 
    [email protected] writes:
    Re:  Install on second computer
    created by Bill@VT (http://forums.adobe.com/people/Bill@VT)  in  Acrobat
    Installation & Update Issues - View the full  discussion
    (http://forums.adobe.com/message/6170637#6170637)

  • LR4 , CS5 Design install on second computer

    I have LR4 and CS5 Design standard on my I mac, all purchased at adobe and downloaded. I recently purchased a macbook pro for work and need to add these programs to it.
    My question is, on Adobe.com I can see my purchases an cannot download LR4 again? also, the CS5 Design standard was an upfrade from CS4 design standard, which was
    an upgrade from Photoshop CS4 and CS3. Do I have to download all versions in order or just the latest CS5 Design Standard?
    Responses appreciated

    I don't have a disk. I bought Acrobat X Pro online.
    In a message dated 3/1/2014 8:43:53 P.M. US Mountain Standard Time, 
    [email protected] writes:
    Re:  Install on second computer
    created by Bill@VT (http://forums.adobe.com/people/Bill@VT)  in  Acrobat
    Installation & Update Issues - View the full  discussion
    (http://forums.adobe.com/message/6170637#6170637)

  • WHY WON'T CLOUD INSTAL ON SECOND COMPUTER?

    WHY won't cloud instal on second computer..it just says over and over failed?

    attach a screenshot of the error message, http://forums.adobe.com/thread/963429

  • Need help installing a second hard drive into my G4.

    I'm going to install a second drive into my G4. This is from an exact duplicate of my current computer. What do I need to do to get this into my computer...it has information on it now, but I don't need it. Please give me step by step instructions. Thanks Leigh

    I just added drive(s) to my G4 450 (Sawtooth) and had boot problems and knew it had to do with jumper settings. I solved it however by putting my original boot drive in the upper portion of the carrier and a new drive in the lower portion. That way the data cables were syncing correctly.
    Already had a SATA controller (2 connectors) with one drive on it and filled the second so now the ol Sawtooth is sporting 4 drives.

  • Lightroom install on second computer?

    Can lightroom be installed on a second computer?

    Ask for serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  • Purchased export pdf.. can it be installed on second computer? should i pay again?

    IF I PURCHASED THE ADOBE PDF FILE EXPORTER, CAN I USE IT ON SECOND COMPUTER?
    OR SHOULD I PAY FEE AGAIN?

    Good day,
    Once you have a subscription to ExportPDF, you may access it on any computer since it's a web-based service.  It's important to note though that a single subscription to the ExportPDF service is for one individual to use.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

    Installed on my desktop, works fine. Installed on my Laptop, does not work.
    As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
    As user the switch in the toolbar is there but it does not activate the clip window.
    On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
    Henk

    Hi Tomasz,
    as I figured out, this problem is related to the usage or measurement of the InDesign-document  at least for me.
    I create two portrait-oriented InDesign Layouts.
    For the first I choose Print-usage in the New Document-dialog.
    For the second I choose Web-usage in the New Document-dialog.
    The first will render as bitmap (wrong).
    The second will render as PDF (correct).
    Folio- and Article-Image-Type is set to PDF in both cases.
    Strange behavior.
    Regards
    Ingo
    Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
    OK. Ingo, have a look:
    attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
    Cheers,
    Tomek
    http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
    >

  • Help installing a second hard drive in HP ENVY 700-230qe CTO Desktop

    I am trying to install a Western Digital 1.5 TB (model # WD15EARSSP) internal hard drive to my HP ENVY 700-230qe CTO Desktop PC. Would you please provide me the instruction menu and procedure for the second HD installation? What kind cable and other supplies do I need to connect the new HD to my PC? SATA cables: Straight–Straight, Straight–left angle, Straight-right angle… etc.
    This question was solved.
    View Solution.

    Bling888, welcome to the forum.
    Here is a guide that should help you.  Be certain to watch the video.  You will need SATA III cables; power and data.  Although, the SATA 1.0 cables will work fine if you don't have the others.  I have found that the straight cables have always worked for me.
    Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • LR4 Upgrade- installing on second computer

    I recently installed the LR4 upgrade on my main computer (iMAC). I am purchasing a laptop this week I want to put a second copy on. Can I just use the LR4 disk or do I have to dig up my original LR file (LR2) and install that first?

    The Adobe license agreement allows installation on two computers.
    I think you can install Lr4 on its own but you need the serial # for your first full version license. If I remember correctly: After you enter the serial # for the upgrade Lr4, you will be asked to enter a serial # for a full version. So dig out your Lr2 serial #. You would also need it if you installed Lr2 first.

  • Lost library, ratings and versions since installing on second computer

    Hi, I recently installed aperture 3 on my secondary computer, no issues. But when I went on aperture on my primary computer before it opened it asked to perform update to library, now I have lost all albums, ratings and variations i've created since mid 2009! This is when i originally upgraded from aperture 2.0 to aperture 3. The master images are still on my external hard drive, but i have lost all the work i've done on them over the last 4 years. Any help much appreciated.

    Hi, in answer to your questions:
    On the old computer which shipped with aperture 2 pre-installed it was running on aperture 3 which i updated to back in mid 2009.
    On the secondary mac i tried installing aperture through the aperture 3 upgrade disk, which then asked me for the original serial number, I requested this from apple (as it was pre-installed) and put that in and then it went onto install apperture 3 on the secondary mac. It installed fine on the secondary computer
    The problem occured when i went to use aperture on the old mac, that's when it said it needed  to update the library. It all opens fine, but what is missing is any data from mid 2009 onwards (when aperture 2 was upgraded to aperture 3. I can still manually import the masters again, but what i'm missing is all the albums, editing, rating and different versions of images i have created since mid 2009.
    I've searched for any other libraries on my system or external drives there are a few, but all look older and contain less data than the one i am using now.
    I'm at a loss and quite worried that i've lost all that data for ever after pressing the update library button.

  • PSE 12 install in second computer - same lic.

    I have PSE 12 on my mac, and want to also download and install it on my windows computer.  how do I do it?

    Well, if you bought a download you got a serial number that is good for two computers but only on one platform, as opposed to the boxed version which comes with a serial number that's good for both.
    You can try downloading it in windows and see what happens, but it probably won't work when you go to enter your serial number:
    Download Photoshop Elements products | 12, 11, 10

  • Where can I find Photoshop serial number, to install on second computer?

    I have Cloud running on my work computer and tried to install on my home computer (Win 7). When I launch an app, I am asked to license the software and sign in with my Adobe ID. I do this but am then asked for a serial number. I never received one with my order. Where can I find it?

    OK I followed all steps on that page. I was able to connect to https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png to see the two logos but was not able to connect to https://lm.licenses.adobe.com/. I reset my hosts file, checked the certificate, and went through my firewall and router. I can't find anything that is preventing me from seeing https://lm.licenses.adobe.com/. My apps still will not register.
    I also followed the last link to https://exception.licenses.adobe.com/aoes/aoes/v1/t1?locale=en to enable offline registration but these directions do not apply to CC. I see no screen that allows me to begin offline registration.

  • PSE 10 install on second computer

    I bought PSE 10 last year and installed it on my own and my husband's computers - I understand that two computers is the maximum - from the Adobe website.  Recently, he had to restore his computer to factory default and lost the program.  Where can I get a PSE 10 download now so he can resume using it; there is no download for it here on the Adobe site.

    actually, the two concurrent installs/activations limit is for one user (eg, one user's home pc and laptop).   it's not intended to be used by two different people.
    that said, if one person needed to deactivate an installation in order to re-install and that was impossible because of a crash, they would need to contact adobe support for an activation reset:  http://www.adobe.com/support/chat/ivrchat.html
    also, if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

  • XLogic 9 re-install on second computer?

    Hello there,
    I have a copy of Logic 9 on my iMac. I recently purchased a Macbook and wish to install Logic on it..However I cannot find my original purchase
    in my App store account. As it was purchased over 18 months ago it comes up as 'no orders to show'. Any way I can download Logic 9 onto my Macbook? I am reluctant to update to X (if it ain't broke, don't fix it, I say) and have read in a variety of places that you can install Logic on 2 computers. Any help would be very much appreciated with this!

    Hi
    If you bought LP9 from the Appstore it should show under "Purchases" BUT: make sure that you have logged in to the Appstore using the ID that you used when you bought LP9.
    CCT

Maybe you are looking for

  • AP - updating unpaid invoices payment priority

    all: Any one have suggested script which to use to update unpaid invoices payment priority code on ap_invoices_all table. there is ap_invoices_pkg.update_row api but do not have adequate information on this api to make this script. Will appreciate an

  • The layout of source file do weird changes

    Sometimes, after re-opening a Muse CC document the layout is completely changed on design environment. If I try to pubblish it, the result on the browser is ok. I solved this in that way: cut some object on page and then undo the operation. This will

  • Double buffering on large pane

    I have a large JPanel which I'm drawing onto which is about 5000 x 5000. To eliminate screen flicker when dragging objects I'm trying to use double buffering. The problem is the image is too big and I get an out of memory error message. I've tried us

  • Manuel slide timing with an audio track

    My wife is a professor and she is wanting to post podcasts of her lectures. I am trying to figure out how to include her Keynote '08 slides in those podcasts. Is there any way in Keynote '08 to add an audio file and still have manuel timing of the sl

  • PS CS3 - Smart Objects are "Jaggy"

    I've been trying to copy/paste some vector art from Illust CS3 into PSCS3. Regardless of what option I select (Smart Object or Pixels), the artwork comes in jaggy. Tried the same thing in CS2 and had no problems. I checked the clipboard prefs in both