Help installing Premier Pro Please?

I have installed the two disks on my pc.....and it says 'Thanks'  ...but no startup icon has been put on the desktop...and there is no startup icon in Program files/Adobe/Premier pro. 
I would appreciate any help ..I am at a loss to kbnow what to do next.
I have installed it twice
Cheers

Thank you for responding folks...:)
My version is DVS/A,PPRO,4.0,WIN,GEN, WWE,REV  (thats off the cd box)  My OS is WIN XP Pro
There are 2 install discs in the package...plus a tutorial disc
Thanks for any advice?

Similar Messages

  • Now i have tryied everything i need help getting premier pro trial real help pls!

    now i have tryied everything i need help getting premier pro trial real help pls!

    Hi,
    Are you facing issues installing Premiere pro trial?
    Please mention your operating system.
    Error(If you're getting any)
    Thank you,
    Mohd Naseem

  • I am a Creative Cloud subscriber and am trying to open recently installed Premier Pro.

    I have installed Premier Pro and it has worked a few times and now will not open - it is giving the error massage "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" I have updated my Nvidia drivers and it still will not load. I have opened older Pemier Elements 7 and 11 and they work fine. I have tried other video files (Youtube etc) and they work fine too. I have rebooted Windows 7 without success. Any ideas ?
    Just tried Right click on short cut and chose Run as Administrator and that didn't work either -

    thanks very much ! no luck I'm afraid. Right click and "run as admministrator" did't work. I dont have an AMD graphics card and so thats not applicable and I am not skilled enough to play around with the BIOS. I figured out I had a NVidia GeForce GTX 260 graphics card and that was not on the Premier Pro list of supported cards. So I found the cuda_supported_cards.txt file and tried to add the "260" to the list - I added the card but when I tried to save the edited TXT file I got an "Access Denied" message and so I am still stuck. Be very grateful for any help. Seems like a lot of folks are having this problem with Premier Pro as the list of supported cards is apparently limited.

  • I was trying to install premier pro it says its installed but it isn't and i can't reinstall it

    i was trying to install premier pro it says its installed but it isn't and i can't reinstall it

    Thanks for the added information, the screenshot did not get posted but that is ok.
    These steps should resolve the issue on your Mac:
    Double-click on the link for Uninstall Adobe Premiere Pro CS6 at Applications > Utilities > Adobe Installers.
    Check if the Install link is now available in the Adobe Application Manager.
    If not, install and run the Adobe Cleaner Tool to remove any traces of Premiere Pro. It can be downloaded from here: http://www.adobe.com/support/contact/cscleanertool.html.
    The Install link should now be available in the Adobe Application Manager.

  • Need help installing Adobe Pro 9 Product code [removed by moderator] to my new PC tower.

    Need help installing Adobe Pro 9 to my new PC.

    Hi albertc40027908,
    You might need to deactivate Acrobat 9 from your old machine.
    Then, install the software from a CD (if you have) and activate with the same serial number.
    If you don't have a CD, then you might install Acrobat 9 pro from the below mentioned link:
    Download Acrobat products | 9, 8
    Hope this helps.
    Regards,
    Anubha

  • Re-install Premier Pro CS4

    How do I download and re-install Premier Pro CS4 from web site. The program has been deleted from my computer. I have the serial number, proof of purchase etc. from 2008. I was using Windows vista and now have Windows7 on this
    computer.

    Download from Download CS4 products

  • Can't install Premier Pro CC 2014 on my MacPro

    I have been trying to install Premier Pro CC 2014 on my MacPro, but it always stops at 42% and asks me to close PhotoshopServer.
    The first time this happened I opened Activity Monitor, found that process and ended it with a Quit/Force Quit.
    When I hit Retry on the installer, it immediately asks me again to close PhotoshopServer.
    Problem is, it is no longer running.  Doesn't show up in the active process list.  Doesn't show up in search.
    Tried restarting and going through it all again, with same result.
    Haven't had any problems with any of the other CC 2012 installs.
    Any suggestions?
    Thanks,
    Mark

    Hi Jeff,
    I have nine network drives that launch from my Login Items, but nothing else.
    Thought there might be a firewall issue but had the same problem with it off.
    M.

  • I can't install Premier pro 6.0 onto my iMac, its pops up for a second in my dock along with Adobe logo then goes again. Im using a compatable os too, please help

    I have been trying to install Premier 6.0 back on to my computer after returning to the creative cloud.
    I can download it, when it comes for me to install it, it wont launch. It pops up into my doc for a second then goees again.
    Can anyone advise me!
    I am using Mac OS X Version 10.6.8
    Thank you x

    Hi sarah gilkinson,
    It is not clear whether the application has been installed on your computer or not. Can you please tell me how did you install the CS6 version? If you downloaded it from the Creative Cloud desktop application, it would have been installed on your computer by itself. To confirm if it has been installed, please check if you see Premiere Pro CS6 in your Applications folder.
    If it is there, try to launch it and let me know if you see the splash screen. Also, please specify more details about your computer like RAM, Processor and Graphics. It would be of great help if you can attach a screenshot of the problem.
    Thanks!
    Rameez

  • Why won't my newly installed Premier Pro CS5.5 start?

    I just had to have my PC overhauled with a new motherboard and decided to upgrade my Adobe software while I was at it. Installed the Production Suite today and when I try to start Premier Pro CS5.5 it acts like it is starting up, brings up the workspace screen but then just shuts down.
    I've got an AMD Phenom II X4 840 Processor 3.20 GHz, 4 GB of RAM, and am running Windows 7.
    Photoshop and seval other of the Adobe Programs open just fine...though I haven't tried any of them out just yet...Premier Pro is what I need to use right now and so it's just par for the course that it isn't working.
    Any ideas what the problem is?
    Thanks

    Premiere Pro shut down...I didn't have a lot of time to try and work on this today but I did poke around trying to find the preferences and set about to pull up the event log before having to leave. I figured I would give it a look tonight...I opened some of the hidden files trying to find the preferences didn't have much luck...was about to figure out how to pull the event log (never done that before) when I happened to click on an old project file I had from my older version...and the program opened...even better it stayed open.
    To my knowledge I did nothing at all other than look in some hidden folders. I have tried a couple of different times now to just open the program from the start menu and it works...now my firewire port is on the blink so I haven't had a chance to actually try the bugger out but I have verified that all seems stable...for now.
    Thanks for the input...if I wind up having the trouble again I'll start with your suggestions but hopefully it won't come to that.
    Harm Millaard <[email protected]> wrote:
    What shuts down? The computer or the program? Any messages in the event log?
    >

  • Help installing XP Pro on K8T Neo2-F!!!

    I'm trying to help my cousin install XP Pro on their new pc. It's got an Athlon 64 3000+, K8T Neo2-F, 512mb Samsung ram, and an 80gb ata drive. before i started to fix it, my cousin said that he stopped the xp install midway thru because he forgot to install the RAID drivers. when i try to reinstall xp, it just freezes on DOS when it says "setup is checking hardware configuration" or sumthin like that. i also noticed that their dvdrw drive stops spinning and has a clicking noise at that point. i tried installing win 98 on it and it worked, then tried to upgrade to xp, which froze when the pc rebooted. anyone have any idea what's going on???

    Hi. My setup is very similar, and I had a similar problem installing XP as well. Do as simon suggested to make sure your harddrive is clean for a fresh install. Make sure the promise 579 SATA controller and the VIA SATA RAID controller are both disabled in BIOS. Especially if your not using a RAID setup or any SATA drives you wont need them anyway.
    Install XP as normal. Do not install the RAID drivers from the floppies by hitting F6. Now the XP installation should be able to complete itself. If you want to use the controllers later, enable the one (or both) you want in BIOS, Then install the drivers from the CD under Device manager update driver option.

  • General Help With Premier Pro 6

    I am finding Premier Pro-6 to be very daunting. I have a Canon M50 and was wondering if there is a guide of sorts that can walk me through the steps of importing footage. If I understand correctly you cannot import directly from the camera but rather must copy the entire folder structure (including CVINFO, MY_MUSIC and MY_PICT) to the hard disk.
    Any help would be greatly appreciated. I've used Final Cut Pro for years and that is about the extent of my experience.
    Many thanks,
    Martin

    You are halfway there.
    Indeed copy the whole card to hdd.
    Then to the Media Browser and click on the STREAM directory on the hdd.
    Clips will appear on the right side.
    Double click on a clip and it will open in the Source Monitor, trim the ends and drag to the timeline. Clip is now imported into your project.
    Another way is to double click on the Project Window and import all the clips from the STREAM directory.

  • How to install premier pro on a different computer

    I have premier pro already and usually I use it on an imac but would like to download PR and use it on my laptop. How can I sign in to my account where I have other videos saved. For some reason when I downloaded PR to my laptop, it got me a trial instead.

    Hi,
    With an individual account, you would be able to work on two computers simultaneously. Make sure you are signed in with the same Adobe ID on both computers.
    Thanks,
    Rameez

  • Photoshop keeps on getting out of memory error after installing Premier Pro

    I just upgrade my CS to CC. Yesterday I installed Photoshop and did my work without any problem but today after installing Premier and After Effect, I keep on getting out of memory error when I'm working even though I don't have any other application running accept photoshop alone. The file I'm working on is a small file, iphone plus size interface. Basically I can open the file, add blur effect and try to type text I will get photoshop telling me that my system is out of memory. Restarting photoshop give the same problem, restarting my computer give the same problem, ie do one thing and next will give memory not enough.
    I don't think my system is slow as it is workstation with dual processor and 12 gig of ram, windows 7 64bits 1gb dedicated memory for graphic card.
    I uninstall Premier and After Effect and suddenly the problem go away. Photoshop work as per normal. I didn't have the time to reinstall premier again but will try to do it tonight or tomorrow
    Anyone experience such problem before?

    When you get that error leaver the error showing and use something the can show you how much free disk space there is left on Photoshop scratch disk.  It may be a problem with scratch storage space not ram storage space.  I see Photoshop use much more scratch space the ram.  I have seen Photoshop using less than 10GB of ram on my machine leaving 30GB of free ram on my system unused while using over 100GB of scratch space.

  • CS5: I chose not to install Premier Pro but it installed anyway.

    During the installation program I deselected Premier Pro and After Effects.  After the installation was complete, both were in my Applications directory.
    As a side note, Adobe really needs to contain all these applications into one parent folder.  I'm tired of all these folders clogging up my Applications directory.

    Christian,
    That is exactly what I do on all of my Adobe programs. Everything (save for Acrobat Reader, which installs where it wants to, with no input from the user) is in my C:\Adobe folder, with each program in a sub-folder below. Do not know it this ability has been stripped out, as I have both the CS2 Production Studio and Creative Suite Premium, but PS, AI, InDesign, AE, Acrobat Pro, Go-Live, PrPro, Encore, etc.
    Hunt

  • Help! Premier Pro CS4 buy

    I have 32-bit Windows 7. I make documentary and I need Premier Pro CS4. How can I buy this version?

    [email protected] wrote:
    found the official way to purchase.
    How did you purchase CS4?

Maybe you are looking for

  • Can I share an iCloud photo library between family members?

    I am searching for a good photo and video backup solution for my entire family. Previously I was backing up photos to a Windows Home Server that did a weekly backup to Amazon's cloud storage; however, the system disk on the home server blew up, leavi

  • Propagation disabled with error ORA-25315

    Hi, I setup a stream replication for one schema in my db, but the propagation process suddenly disable with error message "ORA-25315 unsupported configuration for propagation of buffered messages", the schema only use some normal datatypes and I have

  • Tax error - audit data - table ETXDCJ with wrong data

    Hi,    I am working on audit_data file that external tax system receives from SAP. table entries in 'ETXDCJ' are fed to audit_data file which are wrong. Please let me know how this table gets the entries. Any transaction or steps that I need to know

  • Oracle 11g spatial database

    Am new to spatial data of oracle... the oracle manual mentions the following steps in order : 1)Creates a table to hold the spatial data. 2) Inserts rows for areas of interest. 3) Updates the USER_SDO_GEOM_METADATA view to reflect the dimensional inf

  • Is iSync able to sync from my Yahoo account?

    I spent a lot of time yesterday cleaning up all of my contacts. My iDisk, iPad, iPod, gmail are all in agreement. The computer did it's automatic sync just now then I got a window telling me more than 25% of my contacts will change. The information t