Help Integrating iWeb and ImageCaster (WebCam Software)

Hi All,
I've tried obtaining assistance with the manufacturer of ImageCaster, but they were little help.
I'm a newbie when it comes to web cams, website production, HTLM, etc., but want to start building a website with iWeb.
Was wondering if any ImageCaster software users could provide assistance in integrating an ImageCaster webcam "window" into iWeb (preferably using a custom frame). I've seen posts out here offering help with EvoCam, but not ImageCaster.
Thanks in advance for any help you can provide.
iMac G4 (15" flat panel) Mac OS X (10.4.8) 256 MB memory, 800 MHz w/ SuperDrive

I don't know... from this page
http://www.econtechnologies.com/site/Pages/ImageCaster/imgcast_overview.html
(at the bottom)
and this page
http://www.econtechnologies.com/site/Pages/ImageCaster/imgcast_tips2.html
it looks like it will make web pages for you with various frames, etc.
Integrating it into iWeb is probably possible, but I don't know enough about the program.

Similar Messages

Looking for DELL Webcam Central software and the webcam software updates

My laptop is DELL XPSM1530. I read that the webcam was made by Creative Technology.
Recently, I read in DELL.com that there is a software named DELL Webcam Central.
It was said that it can improve the camera performance.
I have looked for it in DELL.com but I did not found it and I also have looked it here but I got nothing.
Where can I get it? Is it the same as Webcam Manager / Webcam Central that has been installed in my laptop here?
And if it the same, where can I have the software updates?
Thank you.

Hi,
You will stand a better chance getting in touch with Dell, the download site here does not offer the mentioned webcam software.

Need help with DynDns and Foscam Webcam

I realize this may be basic, but I have not found a post anywhere on the internet that has solved my issue. I have a Foscam FI8918w webcam that is currently configured and working with my Time Capsule router. I can login to my camera on my network with absolutely no problem. I created a dyndns account so that I could remotely access the camera to utilize pan, tilt, zoom, etc. I created the dyndns account and added my current ip address to the host. I'm running the dyndns updater in the background and it is enabled for the host. I have also mapped the ip address of the webcam to a specific port that I chose in Airport Utility.
FOR THE LIFE OF ME, I CAN'T FIGURE OUT HOW TO ACCESS THE CAMERA THROUGH THE INTERNET.
I think i've done all the hard steps, I just can't seem to connect the C-D in the ABCDEF for this project. I've searched through as many dyndns articles, support tickets, youtube videos, etc. I still can't seem to get it right or what is the step that connects the dyndns to my camera!!!
Please help!!!
Thank you!!

To successfully access an IP camera on the local network from the Internet, the following basics need to be taken care of:
Install the camera(s) and verify that you can access them from the local network.
Configure port mapping/forwarding on your router. Typically, IP cameras require at least two ports: 1) A web port for administering the camera; Usually TCP port 80, and 2) A streaming port to broadcast the camera video feed; Usually UDP port 9000. Note: You should check with your camera's documentation for the exact ports required.
If the camera is attached to a computer, you will need to configure the computer's firewall to open the same ports as in step 2 above.
Verify that your modem is in bridge mode, i.e., if the modem provides NAT & DHCP services, turn them off.
Test your network. Use CheckIP to determine your router's current WAN-side (public) IP address. Then, from a remote location (not from a computer on the local network), use the DynDNS Open Port Tool to verify that the required ports are open. Success is an "Open" response from the Tool.
The following are general instructions on how to configure the AirPort for port mapping:
Time Capsule - Port Mapping Setup
To setup port mapping on an Time Capsule (TC), either connect to the TC's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the TC, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
AirPort Utility > Select the TC > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC hardware address of the IP Camera>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the TC.
AirPort Utility > Select the TC > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the reserved IP address of the IP Camera from above>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"

Help integrating iPhoto and Photoshop Elements 4

I bought Photoshop Elements 4 and would like to use it to edit my photos from iPhoto then take them back into iPhoto. Smtr said that's what he/she does. Could someone help me set up iPhoto to do that. I am not using Adobe Bridge thanks for the info.
Wow, PE 4 sure is powerful. Now I have a lot to do. Thanks for all the help.

RL:
After setting iPhoto's preferences as Terence described be sure to set PSE4's color management to the following thru the Edit->Color Settings menu option:
If you want to be able to use both iPhoto's editor and PSE's then see the following:
Using 2 Image Editors in iPhoto
If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.
And lastly, if you do any edit with PSE that causes PSE to want to change the extension to .psd, i.e. created a layered file or some of the more advanced edits, you MUST either flatten the image and force a save as a jpg file OR do a Save As to the desktop and then import the new .psd file. If you don't iPhoto will not know you did an edit and will still uses the original file.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Please help! iweb and 123-reg.co.uk

Hi,
I have read the various postings and still have no idea what I am doing.
I have gone to my my DNS settings and what I have is:
@ A 194.154.164.82
www CNAME web.mac.com. (I can't seem to lose the dot on the end)
www CNAME 194.154.164.82
mx0.123-reg.co.uk. Priority 10
mx1.123-reg.co.uk Priority 20
I have turned web forwarding off but this hust sends my domain to a holding page care of 123-reg.co.uk Should I turn web forwarding on - if so what URL do I ask it to forward to?
Any help would be much appreciated.
Kind regards
Matthewmacduff

Hi there,
I hope you've sorted your problem out. I'm also with 123.reg and had similar problems which have mostly been resolved. If your still struggling. Log in to 123reg.co.uk and go to your control panel. Click on web fowarding and select either framed or non framed forwarding. Add your site to the add url eg http://web.mac.com/yourname. Add title to be displayed in browser (presumably you've registered/bought a name with 123reg)...thats it
My problem with 123reg's system is that it, to me, isn't particularly user friendly. My web forwarding works great but the browser bar only ever shows smandrews.com and not smandrews.com/home/html...anybody know why?

Working with iweb and ATT webhosting

I made my business website on iweb and downloaded it through FTP to my att webhosting site because it was simple and easy through iweb's step by step process.
I'm new at website building and don't even understand the lingo when trying to read these blogs for more insight.
I want to build beyond the basics such as adding meta tags and checking my site hits but I'm not sure if I do it through my webhosting account or through iweb.
Anyone know where to go to find help how to work these two programs together?
Apple tech only help with iweb and most of the ATT tech don't know how to work iweb so it's hit or miss when talking to them depending on who answers your call.

To add meta tags to your site you need to do this in your site directly, but your published site so that it is added to the html code.
Download a programme called iWebSEO. Go to iWeb and publish your site to a local folder and then open your published site with iWebSEO and add the tags, Google analytics etc., and anything else you want. Then use either iWebSEO to upload to your server or use a dedicated ftp client such as Cyberduck to do this - it can be downloaded for free from the internet.
You can easily place a hit counter on your site by inserting the code into an html snippet on your site. Do a Google search for hit counters and you will have lots of choices.

Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software

Please read the information at...
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Locate the execute file (WebcamDell2.exe) buried in...
C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
battery back in and start the computer. Did the webcam come back?
If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
Please use Internet Explorer(32-bit) when navigating to My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
If system does NOT register after 5 minutes, then contact Dell Tech Support.
If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for software update
Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
Rick

Hello Rick,
Thanks for trying to help.
Here is the info as requested:-
Host Name: DELLLAPTOP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Trevor
Registered Organization: Microsoft
Product ID: ?????
Original Install Date: 07/07/2010, 11:46:05
System Boot Time: 24/10/2011, 12:06:27
System Manufacturer: Dell Inc.
System Model: Inspiron 1570
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
BIOS Version: Dell Inc. A05, 23/03/2011
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,937 MB
Available Physical Memory: 1,399 MB
Virtual Memory: Max Size: 5,872 MB
Virtual Memory: Available: 4,244 MB
Virtual Memory: In Use: 1,628 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server: \\DELLLAPTOP
Hotfix(s): 71 Hotfix(s) Installed.
[01]: 982861
[02]: KB971033
[03]: KB2305420
[04]: KB2393802
[05]: KB2425227
[06]: KB2475792
[07]: KB2476490
[08]: KB2478662
[09]: KB2479628
[10]: KB2479943
[11]: KB2484033
[12]: KB2485376
[13]: KB2487426
[14]: KB2488113
[15]: KB2491683
[16]: KB2492386
[17]: KB2503658
[18]: KB2503665
[19]: KB2505438
[20]: KB2506014
[21]: KB2506212
[22]: KB2506223
[23]: KB2506928
[24]: KB2507618
[25]: KB2507938
[26]: KB2508272
[27]: KB2508429
[28]: KB2509553
[29]: KB2511250
[30]: KB2511455
[31]: KB2515325
[32]: KB2518869
[33]: KB2522422
[34]: KB2524375
[35]: KB2525694
[36]: KB2529073
[37]: KB2530548
[38]: KB2532531
[39]: KB2533552
[40]: KB2533623
[41]: KB2534366
[42]: KB2536275
[43]: KB2536276
[44]: KB2539635
[45]: KB2541014
[46]: KB2544893
[47]: KB2545698
[48]: KB2547666
[49]: KB2552343
[50]: KB2555917
[51]: KB2556532
[52]: KB2559049
[53]: KB2560656
[54]: KB2562937
[55]: KB2563227
[56]: KB2563894
[57]: KB2564958
[58]: KB2567053
[59]: KB2567680
[60]: KB2570791
[61]: KB2570947
[62]: KB2572077
[63]: KB2579686
[64]: KB2586448
[65]: KB2607712
[66]: KB2616676
[67]: KB958488
[68]: KB976002
[69]: KB976902
[70]: KB976932
[71]: KB982018
Network Card(s): 4 NIC(s) Installed.
[01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection
Status: Media disconnected
[02]: Intel(R) WiFi Link 5100 AGN
Connection Name: Wireless Network Connection
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
IP address(es)
[01]: ????
[02]: ????
[03]: Microsoft Virtual WiFi Miniport Adapter
Connection Name: Wireless Network Connection 2
Status: Media disconnected
[04]: Cisco Systems VPN Adapter for 64-bit Windows
Connection Name: Local Area Connection 2
Status: Hardware not present
Hope that this will help.
Thanks again
Regards
Trevor

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

It is probaly just "inline" ie part of the text.
click on it > Inspector > Wrap > Floating
Peter

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

Check this thread where people have already given their suggestion on learning SSIS
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
Happy Learning!!
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

Nobody can help you with at least some system information....
Mylenium

I have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !!

i have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !! it says it can sync them but then it does not copy them from my itunes back onto my phone ?

I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?

When i install the new os my fcp,motion and many adobe software not working so please help me out.

when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Help- Changing iweb podcasting site and adding feedburner

I set up a podcast with iweb then realized I wanted to change a few things.
1. I want to change the website name in iweb from "Site 2" to "Awake Podcast"
When I do this it changes the feed, and I can't access the old feed.
2. I wanted to change the feed to feedburner so I can track the podcast.
How do I do this? What order? Which feed to I adjust? What code do I need to add?
I'm new at this. Any help would be appreciated.
Justin

In order to change iTunes to a different feed (and as you've found changing the site name in iWeb changes the feed URL by changing its name) you have to add a special tag to the feed:
<itunes:new-feed-url>URL OF YOUR NEW FEED</itunes:new-feed-url>
This can't be done within iWeb which doesn't allow you to tamper with the feed. Download the existing feed from the server, Open it in TextEdit *IN PLAIN TEXT MODE* not Rich Text. Add the tag just below the 'channel' tag near the top of the feed (on a new line). The URL must be full and include the http://
Upload the feed manually to the server, replacing the existing feed.
Now change the name of the podcast site in iWeb and do a complete republish. Make sure that it hasn't over-written or removed the modified feed: you may need to upload it again, and you may need to recreate the folder it was originally in. Wait for iTunes to recognize the new feed - it shouldn't take long.
If you want to involve Feedburner you will have to submit the new version of the feed to Feedburner. Mke sure Feedburner have uploaded their version of the feed. Then you will have to download the new iWeb feed and modify it by adding the tag with the Feedburner URL. Once you have done this *DO NOT* do anything in iWeb until you are sure that iTunes has transferred to the Feedburner feed. Then you can add new episodes in the usual way.

Help Integrating iWeb and ImageCaster (WebCam Software)

Similar Messages

Maybe you are looking for