HELP! --- Intelligent Agent installation.

Anyone can tell me how to install Intelligent Agent? I hava Oracle8i running on RH Linux6.1 but don't know what to do to install Intelligert Agent. Some doc mentioned "<Notes:97135.1>" as a resource, from Oracle's web site, about this issue, but I still don't know where to find the notes.
Please help. Thank you very much.

Just re-read your post.
For certification you need metalink:
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5) Information:
* See Note 394214.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4) Information:
* See Note 343895.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3) Information:
* See Note 357152.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3)
I can't see your version of sun listed, but like I said I have no experience of sun.
Bazza

Similar Messages

Intelligent agent installation.

I just found that the reason my OEM's Navigator doesn't populate is because the Intelligent Agent is not running on my Oracle/Linux box. But how do I install/run it? Some Doc mentioned "<Note:97135.1>" whithout telling where to find it. Can someone help me on that?
Thanks.
Lifeng

Just re-read your post.
For certification you need metalink:
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5) Information:
* See Note 394214.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4) Information:
* See Note 343895.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3) Information:
* See Note 357152.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3)
I can't see your version of sun listed, but like I said I have no experience of sun.
Bazza

Oracle Intelligent Agent installation.

I have to install Intelligent Agent on Sun 5.9 . Is there any way to check its Certification matrix.
I want 10.1.0.3
But on the download site of Oracle I am seeing that it is for 32 bit not for 64 bit version of solaris, as pasted below :
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3)
for Solaris Operating System (SPARC) (32-bit)
Download the complete files
em10103.cpio.gz (1,660,218,094 bytes) (cksum - 1740476143)
Mass Agent Deployment
Oracle Enterprise Manager 10g Grid Control Management Agent
Any help urgent help will be appreciated.
Thanks
/SKH

Just re-read your post.
For certification you need metalink:
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5) Information:
* See Note 394214.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.5)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4) Information:
* See Note 343895.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.4)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3) Information:
* See Note 357152.1 Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.3)
I can't see your version of sun listed, but like I said I have no experience of sun.
Bazza

Help:I can't start intelligent agent

I've just installed Oracle9i on RH9.
but when i start intelligent agent with :./agentctl start,
an error occured:./agentctl: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory.
But I found the libvppdc.so is in $ORACLE_HOME/lib!!!
Anyone encountered the same problem?
Please help!

did you check all pre-requisites when you installed the Oracle Server ?
Joel P�rez

Help:can't start intelligent agent

but when i start intelligent agent with :./agentctl start,
an error occured:./agentctl: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory.
But I found the libvppdc.so is in $ORACLE_HOME/lib!!!
Anyone encountered the same problem?
Please help!

did you check all pre-requisites when you installed the Oracle Server ?
Joel P�rez

Installation of Oracle Intelligent Agent from the Oracle CD-ROM

I just want to Install the Oracle Intelligent Agent from the Oracle CD-ROM as per the Oracle Enterprise Manager Installation Guide. The Intelligent Agent is a separate component to select but it was not selected at the time of installation . Please suggest how i can install it now.

When prompted hit 'Custom install'. This allows you to select any component.
Obviously this is also in the installation documentation.
Sybrand Bakker
Senior Oracle DBA

Intelligent Agent Won't Run - Please Help!

Hello,
I have been able to install Oracle 8.0.5 on both Redhat 5.3 and
Suse 6.1. Most everything seems to work correctly. I can connect
to the databases from client software.
But I can't get the Intelligent Agent to run in either case.
When I check on it's status after attempting to start it I get
the message "The DBSubAgent is not started".
What does this mean? What do I need to do in order to get the
Intelligent Agent to run?
null

Steve Bowen (guest) wrote:
: Hello,
: I have been able to install Oracle 8.0.5 on both Redhat 5.3 and
: Suse 6.1. Most everything seems to work correctly. I can
connect
: to the databases from client software.
: But I can't get the Intelligent Agent to run in either case.
: When I check on it's status after attempting to start it I get
: the message "The DBSubAgent is not started".
: What does this mean? What do I need to do in order to get the
: Intelligent Agent to run?
You must reinstall this package : tcl-8.0.2-16.i386.rpm.
Regards
null

Has Anyone gotten the Intelligent Agent to work???

I have Oracle installed and all is well except for a few minor
problems that I think the Intelligent Agent will solve. Has
anyone gotten this to work on RedHat 6.0 with Oracle
Enterprise Edition 8.0.5.1??? I was able to get it to work
under Oracle8 SE, but I need EE for the ConText Cartridge.
I have gotten to the point where I can get the dbsnmp process
running, but OEM cannot talk to it.
Please help
--Bryan
null

I'm having the same problem. Does anyone out there have a
solution?
I am running RedHat Linux 6.0 straight out of the box. The only
change I made was to set the kernel parameters according to the
release notes and recompile the kernel.
P.S. Oracle deserves our thanks for providing free developer
licenses to so many of its products, but this is the buggiest
install I've ever seen in my 12 years of working with their
products. Didn't anyone from Oracle test the install? This
problem and the zero length libnjni8.so file are the real
doozies.
I've followed the release notes and installation guide to the
letter and have found several documentation / distribution bugs
that should have leapt out at the first person who tried it.
Thorsten Khnemann (guest) wrote:
: Bryan Batchelder (guest) wrote:
: : anyone else who could not get it to compile with TCL 7.5 to
: : please at least let me know other people are having the same
: : problem.
: Same problem here, the
: "gmake -f ins_oemagent.mk agent" gives the message
: "gcc: unrecognized option
: `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
: of unresolved references.
: Tested on RedHat 6.0, egcs 1.1.2
null

Oracle 8i Intelligent Agent Service problem

Hi!
We successfully installed Oracle 8i (8.1.7 ee) on Intel P-IV (Xeon) server running Windows 2000 Advanced server (Service Pack 2). It was working properly until now. There was no problem in implementing the tricks useful in installation. After that, database service "OracleService<DBName>" presented problem by not automatically starting on computer startup but it was tamed by "Oradim" command added to startup folder.
All was going smoothly for about a month now but when I rebooted the server PC yesterday, the service "Oracle<HomeName>Agent" failed to start. Along with it the DataGatherer and TNSListener services also failed (Only db service OracleService<DBName> starts but very very slowly). The Windows Event Viewer descriped the problme for Agent service as ,"The Oracle<HomeName>Agent service terminated with the following error: %%3221356551 ". The Event ID is always 7023 for this error. The rest of services just don't give any error codes. It is also stated that nothing has been installed/Uninstalled on this PC in the last several days and no configration changes, in tnsnames.ora, sqlnet.ora, listener.ora, win registry has been made. The TCP/IP configration are intact and NTFS folder and file rights are properly defined.
Starting the service using "Net Start <service_name>" also failed with the message,"System error 7 has occured, Storage control blocks will be destroyed".
Searching online, I also performed some steps in correcting the problem like backup and delete all *.q, snmp_ro.ora, snmp_rw.ora, services.ora files. But to no help. The log files in Oracle_Home\network\logs also dont record the problem even after setting the trace level to Admin or 16. The Agent service simply refuses to start...
Reinstalling Oracle (over existing one, not first removing it altogether. We simply cann't do this now for data loss!!!) or just the Intelligent Agent itsself using univeral installer also fails at the end when it tries to start the intellegent Agent Service Oracle<HomeName>Agent. This time the error described is "O/S error in starting service".
Is this something to do with Xeon server coz the same Oracle 8i is installed much before than this on another P-IV server (not xeon) running the same Op system and it never presented us this problem todate. Its also worth mentioning that this problem occured before as well, on the second day we installed Oracle 8i the first time on Xeon. Since there was no data then, we simply removed oracle, cleared registry and started all over again BUT now it cann't be done.
Any help shall be highly appreciated.
With Regards, Rashid.
SeaBird505 at yahoo.com

Thanks for stopping by this thread. Problem has been resolved from another forum. Actually c:\oracle folder was accessable to administrator only, when I added 'Everyone' to the permission list as well, everything started fine. Allowing 'Everyone' to this folder is dangerous but its working for now :)

Manually starting Intelligent Agent Configuration Assistant and HTTP Listener

I have installed Oracle 9i on Solaris 8 and it stopped with an "Out of Memory" error during the Starter Database creation. I have fixed the memory problem and have now manually started the Database Configuration Assistant manually and managed to install a new database. Now I am trying to start the Intelligent Agent Configuration Assistant and the Apache HTTP Listener, but I cannot find out how to do this so that I can continue on with and complete the installation process from where I left off.
Do anyone know how to do this? I would appreciate any help that anyone can give.
Thanks
Anthony

Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
Of course one might also wonder why you are, just now, installing software so old it is in desupport.

How to install intelligent agent

Can someone please tell me how to install the intelligent agent on the NT server 4.0 platform? I can't install the intelligent agent extension pack due to my intelligent agent hasn't been installed yet.
Please help!
null

Explain what kind of installation you did. Accoding to what I know in 10g there is not an intelligent agent service to administer it explicitly.
Joel Pérez

Problems installing TCL 7.5 and Oracle Intelligent Agent

All
Has anyone had any success in installing TCL 7.5 and Oracle
Intelligent Agent? If so could you please provide a step by step
summary of the installation process. I keep getting error
messages when I run gmake for TCL. I commented out the lines
specified in the instructions. Does one have to use TCL 7.5? I
even tried to run version 8.2 and it restarted my machine while
running gmake test. Maybe it is how I commented the lines. I
used the # character to comment out the lines. Please help. IFve
got everything else running I can even use Net8 and SQL plus
from my Windows NT Client. I now need to be able to use Oracle
Enterprise Manager, which requires TCL 7.5 and Oracle
Intelligent Agent.
Many thanks
null

Thor Erik Jelstad (guest) wrote:
: I am using Oracle 8.0.5.0 and Red Hat 5.2/i386
: When I try to start Oracle Intelligent Agent I receive the
: following error message:
: "DBSNMP: error in loading shared libraries /usr/lib/libtcl.so:
: undefined symbol: stat"
: I have installed TCL package 8.0.3-20.
: Thor Erik Jelstad
I ran into "stat" symbol issues during some builds. I don't
recall if the subject program had to be built, but if so, adding
"-shared" to the cc (for linking) command helps. I think the make
variable is LDCCOM.
-Later.
null

Oracle8i Intelligent Agent (READ THIS)

I renew my request for anyone that has gotten the 8i Intelligent
Agent to work, to please explain how they did it...and for
anyone else who could not get it to compile with TCL 7.5 to
please at least let me know other people are having the same
problem.
If you are an Oracle employee, please explain how you are
supposed to get this to work....the directions in the
installation manual are just plain wrong or at best incomplete.
(Or I am an idiot and didn't follow them correctly). PLEASE
HELP.
Thanks in advance,
--Bryan Batchelder
null

I'm having the same problem. Does anyone out there have a
solution?
I am running RedHat Linux 6.0 straight out of the box. The only
change I made was to set the kernel parameters according to the
release notes and recompile the kernel.
P.S. Oracle deserves our thanks for providing free developer
licenses to so many of its products, but this is the buggiest
install I've ever seen in my 12 years of working with their
products. Didn't anyone from Oracle test the install? This
problem and the zero length libnjni8.so file are the real
doozies.
I've followed the release notes and installation guide to the
letter and have found several documentation / distribution bugs
that should have leapt out at the first person who tried it.
Thorsten Khnemann (guest) wrote:
: Bryan Batchelder (guest) wrote:
: : anyone else who could not get it to compile with TCL 7.5 to
: : please at least let me know other people are having the same
: : problem.
: Same problem here, the
: "gmake -f ins_oemagent.mk agent" gives the message
: "gcc: unrecognized option
: `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
: of unresolved references.
: Tested on RedHat 6.0, egcs 1.1.2
null

OEM intelligent agent

I'm running 8.0.5 on Red Hat 6.0. The system has been running happily for two months, but I'm now starting to play with the management tools and having a problem.
When I start the OEM intelligent agent via
"lsnctrl dbsnmp_start"
I get the following error message in DBSNMPW.log:
NMS-00315: Message 315 not found; No message file for product=network, facility=
NMS
From OEM Doc I found the following:
NMS-00315: Failed to create tcl package index.
Cause: The tcl package index could not be created.
Action: Make sure all the shared libraries in the $ORACLE_HOME/network/agent/library directory are correct.
I checked the $ORACLE_HOME/network/agent/library and found it was empty.
I then started orainst and checked to see that OEM intelligent agent was installed, it shows as being installed
Has anyone run into this problem? Does anyone have a solution?
Thanks

hello,
I have a problem with the installation of a agent in OEM on linux (Fedora).
this error has occur :
Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
SQL> SQL> SQL> WEBSITE Creation FAILED = EM Website ERR:Host not found
CREATE DEFAULT WEBSITE FAILED : ORA-20998: Host not found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-20998: Host not found
ORA-06512: at line 234
Disconnected from Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - ProductionWebsite target creation script failed.
Apr 19, 2004 11:26:04 AM oracle.agent.ConfigureAgent startAgentService
INFO: Starting the agent...
Starting the agent...TZ set to Europe/ParisOracle Enterprise Manager 10g Release 10.1.0.2.0.
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.Starting agent .................... failed.
Apr 19, 2004 11:26:38 AM oracle.agent.ConfigureAgent startAgentService
INFO: Started agent Successfully
Started agent Successfully
The Management Agent Configuration Assistant has failed. The following failures were recorded:
Enterprise Manager Website target configuration failed.
Agent Service Failed to start.
Exit status: 1
Configuration assistant "Agent Configuration Assistant" failed
Can you help me please to resolve this problem.
ps:
OEM is succesfully installed in my computer.

Oracle Intelligent Agent for Novell Netware 5.01

Does anybody has configured the Intelligent Agent in a Novell Environment. We are running Oracle 8.0.4.2.0 in a Novell 5.01.
We are running an environment with 3 Databases. One for test, one for mess arround and our working database. I need to installa the Intelligent Agent in order to run the Enterprise Manager.
If so, can anyone send me a copy of the SNMP_RO.ora and SNMP_RW.ora and some instructions to configure the Intellingent Agent.
I am sending this because I am having the following error:
DBSNMP Discovery Warning: No Listener found for SID TEST.
DBSNMP Discovery Warning: No Listener found for SID OMED.
DBSNMP Discovery Warning: No Listener found for SID PILO.
can't read "OutSnmpOraLocation": no such variable
Failed to initialize nl component,error=462
Please help.

Hi
Where can I download the updated oracle intelligent agent?
CanI use the oracle 9i cd that I have?
Could I installed in the existing oracle 8.0.5 home?
thanks

HELP! --- Intelligent Agent installation.

Similar Messages

Maybe you are looking for