Help! iPad screen problem!

so i just found out that my iPad right side(portrait mode) has a bit fatter black part that u see on the screen, like the black space also known to define the size of the screen, is fatter than my left side black part! i mean the left black space u see on the sides of your screen, is normal! why is that so? is there any problem or is it like that only for the iPad 2?
again - the black part is the space around the screen! the side's space that is not lit up! and makes the screen look odd!
please understnd my question properly! Please!

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

Ipad screen problem ! HELP ASAP ...

Hey guys ,
i just open my bag and see that my ipad screen is something like this :
http://sbms87.com/ipad.jpg
I am absolutely positive that there was no falling or anything ...
i don't have access to any apple retail store or apple care or any apple official delegates at all ... ( i can't replace it )
what can i do ?
please help and give me a solution ..

the first thing i do , was hard resetting iPad and then restoring it ...
seems that this black bar is part of screen . even in restoring , that was there and never left ...
i search the problem in other forums , and found a couple persons that have the same problems . even the position and size of the black bars was the same ( all of them go to apple store and get a replace in no time ! ) ... so i think that's not a random corruption of display connector or LCD ... .
also , this black bar is independent of orientation , that always remain in the same place . and sometimes half of it get lining structure ( lines with different colors ) .
i also capture image from the ipad screen with Sleep + Home buttons and that's correct and there is no sign of black bar ...

IPad Screen problem green and fuzzy

I was happy with my Ipad going online and reading books for hours a day until recently when I turned it on! The screen is greenish and fuzzy like when you have a bad reception on a tv with an analog signal... please help! I have no access to a genius bar as I'm living in Dubai, I had mine shipped here from the online store.

Big thank you to you and BoboWoodyo. Anyone having a problem with their screen looking like an old analog tv who's rabbit ears needed to be adjusted (or worse) should try tapping the upper right edge with their hand a few times before doing anything else. Such an easy fix-who'd of thought? Obviously not me and just as obviously, it is most likely a hardware glitch. I wish I had found this solution at the beginning of my day and not the end. I have a well loved, well used 1st gen Ipad. I had tried all solutions found on this page plus others....hard reboot several times, reset thru itunes, different usb cord, etc. and nothing worked. I had an unreadable screen. My last resort was a clean factory reset found using clear, precise directions from ipadforums.net I know this was successful because of the on-screen itune messages I was getting but at the end of it all, I still could not read my ipad screen. I walked away and had a pity party . I decided to do one more search for a possible solution and happened upon this page. 3 taps was all it took - a beautiful, clear, readable screen again. No apps, no music, no photos, no books, no magazines but it works again so I'm just going to hold on to that happy thought for right now.

IPad Screen Problem...HELP ME!!!

i was using my iPad today just looking through pictures with friends. i shut it off then when i turned it back on for some reason a whole section of the screen is negative.if your at the home screen the strip is right around the second line of apps. i did nothing to the ipad i baby this thing. the screen is not broken because the pixles are still displaying everything like normal except there is a strip of negative pixles. ive tryed restarting the devise and also completly restoring it as well. still i have the strip no idea why. HELP ME!!!

Try this:
• Turn the iPad off and on again (hold the sleep/wake button for about 4 to 5 seconds until a red slider appears with the label "slide to power off")
• Try a hard reset - hold the sleep/wake button and the home button simultaneously for about 4 to 5 seconds, until the iPad tunes off. Then turn it on again.
• If it does not help, restore the firmware with iTunes - IMPORTANT, don't let iTunes use one of your backups… set it up as a new device.
If nothing helps, it is probably a hardware issue, contact Apple…
Please let us know if it helps.
enjoy your magic machine

HT4623 Ipad screen problem.

When using my ipad for viewing "Whimp.com" or "facetime" the picture is sideways. Doesn't seem to be a problem when viewing 'youtube".
I've tried shaking the ipad and turning it in different directions but nothing helps. Anyone have an idea?

iPhone, iPad or iPod screen will not rotate, fix http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
iOS Screen Does Not Rotate
http://support.apple.com/kb/ts3805
 Cheers, Tom

Ipad screen problem

Me acaban de regalr un iapd 64gs y aparece un franja blanca en la pantalla, todo funciona bien.pro esa franja no desaparece. Sera q esta rota la pantalla?

Apart from weak WiFi performance (which I logged with Apple Support some time ago), I have had no problem with my iPad.
2 or 3 days ago a blue 1-pixel line appeared 1 inch below the top of the (portrait) screen.
Restoring factory settings changed the colour to green; restoring all my data and programs changed the colour of the line back to blue.
Rang Apple support for the UK, reported what I had done, and then they said they would send a replacement. Excellent service from Lesley in Greece.

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

Help please , screen problem with my 2GB ipod nano

Hello guys
A month ago i had to change the battery for my ipod , after that eveything worked fine for awhile then the screen was half blank and half i can see the menu, so i thought its a problem with the screen to i odered another one , and when i installed it , the ipod turn on and the pc can recognize it , but there is noting come up on the screen , just the background light, but noting on the screen , not even the mac logo.
anyone know whats why this ?
i hope i can find a solution here
thanks

i tried the restore 3 times and noting happened ,, the restrart , it never work with me ,not sure if the wheels working fine or whats wrong

Ipad screen problem...dropped it now its black

I dropped my ipad...now a black screen...what to do??

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Help ipad mini problem

My daughter just got a 32mg ipad mini and is unable to watch a tv show she bought. She pushes play and the show starts but then immediately stops and won't play. I thought that if she bought a show from itunes then she would be able to watch it anywhere even without a wifi connection. Thanks.

it's working now...I think the problem was that she was trying to watch the show while she was downloading two apps.

Need Help Black Screen Problem?

My screen keeps going black. I set the "Preferance" to 1 hour but that didn't help.
I am a new Apple user on an older machine -- iBook with MAC OS X (104 Tiger)
Thanks for any suggestions.
MVC

Tough to tell, but Might try these things...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
(Then Trash the original of these last two, as "moving" them only copies them.)
Then reboot once more.
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
It could also be a heat issue, or Videocard/Logic board failing.

IPad Screen Problems

I turn on my iPad and it turns on correctly, but the screen won't work. I am trying to unlock it, but nothing happens. The home botton does work and the on power botton also.

See Here for Unresponsive iPad
http://support.apple.com/kb/TS3281
Ipad User Guide

Someone Help - Touch Screen Problem

Hi. I bought a HP Touchsmart 300z series desktop yesterday and I have had some problems with the touch screen since I turned on the PC yesterday.
The first thing that happens is when I install a new program the touch feature goes away. Turn off the PC for a bit and fire it back up and it works fine but leads to the next problem.
The next problem is when I start up the PC and the touch screen is working, if the PC is on for about an hour the touchscreen goes off and I am unable to use it. If I turn the computer off for a little bit and turn it back on, the touch screen will work.
Is anyone else having this issue? And wht can I do?

ftp://ftp.hp.com/pub/softlib/software11/COL31265/pv-77597-1/sp44376.exe
Please install the driver from the weblink above and restart the computer....
That should work....
Regards,
Nice Navi

Help! Screen Problems

Hi,
I've had my MBP about six months now and in the last week these grey shadows have started to appear on my screen, its like the pixels have half died!! Has anyone experienced this and if they have do they know how it can be stopped and fixed, and if its covered under warranty?
Thanks a million,
Mark

I forgot, I did find this blurb from Apple at this webpage:
http://docs.info.apple.com/article.html?artnum=25242
It mentions that some of these laptops may need to warm up for over an hour in order to come to full brightness. Mine has been on well over an hour and is still dim on the right side.

IPad white screen problem

see here --> http://www.youtube.com/watch?v=gMpM5mPQRpI
I have an iPad screen problem where the display is all white. It can only be put back by attaching and detaching the Apple Smart Cover (original from Apple).
Now the screen has a white "halo", it seems the white screen burned the LED or something.
I'll take this to the Apple shop later... but since this is Manila, it's just a "premium reseller", not an actual Apple store with Apple geniuses and technicians...
Smart cover is 21-days old. iPad is 14 mos old. iOS 7.0.4
Is there any fix without having to send it back? Unfortunately I think my ipad is out of warranty. I am in the Philippines.

Try resetting it. Press the home and power button down for about 10 seconds no then turn it back on.
Regards
J

Help! iPad screen problem!

Similar Messages

Maybe you are looking for