Help! ipad stuck in recovery mode after itunes error 6

so I was gonna update my ipad 3 from 6.1.2 I think, to 7.0.4 but I got the error 6 in itunes. now my ipad is showing the connect to itunes symbol and itunes wants to restore my ipad, which I wouldn't wanna if there was any chance to get it out of that frickin mode. I've tried anything I could find on the internet, like several tools such as tiny umbrella, redsn0w, ireb (which said my device wasn't supported cause of the A5) etc. but after rebooting the connect to itunes comes on again.
so if there is any method left that might work for me, pleeeease help me   
a restore is the last thing I wann do, of course I have a backup and so on but it takes so much time to get all my stuff back on and everything

Once the Device is asking to be Restored with iTunes... it is too late to save anything...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup  >  http://support.apple.com/kb/ht1766

Similar Messages

  • IPad stuck in recovery mode after unknown error occurred during update via iTunes

    how can I save photos Stored on that iPad ? please help.

    If the device is in Recovery Mode, the data is already lost. You will have to restore the device to regain access, and restoring will delete all content. If you have the photos in a backup, you can restore to that backup and it will restore the photos.

  • Ipad stuck in recovery mode after accidentally unplugging it while updating

    ipad stuck in recovery mode after accidentally unplugging it while updating to ios 4.2 . and when trying to restore it back it wont restore, restroing error code is 6 what to do ?

    I'm not sure what you can do at this point.  If I had been in your shoes, I would have kept the pics in the camera's SD cards until my return home.
    I'm really reluctant to suggest this but, at this point, you probably can't lose.  Do a "Restore."  Be forewarned that it could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    Edit...
    I just took a peek at the TinyUmbrella FAQs.  Your device has been jailbroke and that's likely the reason why the problem occurred to begin with.  Contact the jailbreaker for assistance.  Neither Apple nor anyone on the forum can help you as we do not know the characteristics of your device.

  • Why is my ipad stuck in recovery mode after IOS update?  I can't get it out even after I restore.  Please help!

    I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out.  I have tried to restore through iTunes, but after restore it says it is still in recovery mode.  Please help!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Why is my iPad stuck in recovery mode after iOS 5 update?

    I plugged in my iPad2 to sync and download a document.  I noticed that there was an update to iOS 5 so I elected to download the update.  As a result my Ipad seems to be stuck in recovery mode as every time I plug it in and attempt to connect to iTunes I get the message. "Itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with itunes."  I do so and after waiting for the update to download it tells me the same thing again.  I have tried different USB ports, rebooting my iPad and the computer and disabling antivirus software.  Please help me I literally need to use my iPad.

    I had a similar issue with my Ipad. I had to take it to Apple, they restored the system but after that my IPad did not sync. It was not until an hour ago I read on another forum someone suggesting disconnecting the Ipad abd turning it off, then connecting it to the PC (usb port) and then turning the Ipad on. Try it it may work for you. I tried apple support 3 times before with no luck! Good luck.

  • Ipad stuck in recovery mode after trying to update in ios6

    my ipad is stucked in recovery mode since trying to update in ios 6  any help?

    Hi there rmarr1,
    The only way to get out of recovery mode is by restoring the device via iTunes. If you initiated the update on iTunes on your computer, there may be a back up of the device that created before the update. Take a look at the articles below for more information.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    -Griff W.

  • IPad stuck in recovery mode after an atempted iOS update on itunes.

    Atempted to update iOS via itunes. iOS update did not take place. No symc or back up visible under devices in iTunes. usb only sees unknown usb device where it once saw my iPad. iTunes sees only unregonized iPad in recovery mode. Atempted restore several times from iTunes without success.

    iOS: Restore errors 4005, 4013, and 4014
    http://support.apple.com/kb/TS5314
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • ITouch stuck in recovery mode after iTunes and firmware upgrades

    my iTouch has hung in recovery mode and will not restore after I updated to iTunes 7.7.1.11 and tried to update the firmware suggested on iTunes Summary screen after launching the new iTunes. The firmware I was at was 1.1.4 and iTunes was offering the update to 1.1.5. Now the iTouch is stuck.
    i have tried the restore function, removed/reinstalled all Apple software, the iTouch resetting procedure (hold power & home buttons together), NOTHING WORKS.
    HELP
    Thanks,
    nitefisher

    I am having problems similar to this. After the ITUNES 7.7.1 upgrade and the ITOUCH 2.0.1 upgrade, ITUNES thinks the ITOUCH is is recovery mode and it must be restored. If you use the ITOUCH it works fine. I have recovered at least 10 times over the last 2 days. The ITUNES syncs sometimes and says restore is necessary sometimes. Various other errors pop up too. "The Ipod could not be restored. An unknown error occurred(6)" is just one of the errors. I wish I could back out the software because the hardware is fine. I suspect bugs in ITUNES. It's bad enough you have to pay for the ITOUCH upgrades but they have errors in them too. I've read numerous variations of this in the last 7 days with no clear fixes. Even the problems I am having are not consistant. If anyone has a clue let me know. Thanks.

  • IPad stuck in recovery mode after iOS 7.1 update how do I fix this?

    How do I fix this ?????

    Is this how you do the restore/recovery?
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My ipad is in recovery mode after updating software

    last night now will not start up,
    I tried holding down start/sleep button apple logo comes up for a second then disappears
    I plugged it into laptop and its now in recovery mode, which I don't want
    how do I get it out of recovery mode without losing everything

    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
     Cheers, Tom

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • HELP! iPhone 4S stuck in recovery mode after trying to udate

    HELP! My iPhone 4S is stuck in recovery mode (the iTunes usb plug in screen) after trying to update ios 7.1.1? Wont come back to normal, someone please help! I have already turned off, restarted, tried wondershare dr phone's free trial and nothing is working. I dont want to restore and loss all of my data and am scared even that wont work.
    I will be forever grateful for any help I can get to just bring my phone back to its pre-update state.
    Thanks!
    Christine

    Unfortunately, if you are in Recovery Mode then all your data is already gone.
    You need to connect to iTunes to restore iOS then restore from your latest iTunes or iCloud backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes

Maybe you are looking for

  • Mac OS X Lion 10.7.3 GSSAPI support

    When trying to authenticate a user against a GSSAPI enabled OpenLDAP server, it seems that opendirectoryd skips GSSAPI mechanism and uses CRAM-MD5. The OpenLDAP server correctly advertises GSSAPI as a supported SASL mechanism (and GSSAPI works with l

  • Datagrid itemrenderer & evaluation of different column

    Hey All, I've been playing with this for a while but can't get it right.  Basically, I have an itemrenderer that has an image and label, but I need to see what the value is of a different column before I know what image to use.  I have a feeling the

  • Can't install PSE in new OS

    I had PSE 6 on both my laptop and my desktop.  I upgraded my desktop from Vista to Win 7 prox64 and have the original install DVD.  When I try to install in my new OS it installs properly but on first use it asks for serial number.  I type the correc

  • Drawing a JPEG

    Hello, I'm looking for some code that will draw a JPEG on an Applet. I've been told that the Graphics.drawImage() function should do it, but I need something to draw an ImageIcon, or something that'll take the file as a String (the filename) rather t

  • DNG Question

    I attempt to answer questions on the Bridge Forum.  Several users are now asking about getting the latest DNG so they can use on their new cameras.  If you have CS3 or even 4 and want the latest how do you do that?  I have never done this but the web