Help!!  iPhone 4 Voice Control and screen lock

Hi.  I have an iPhone 4 and this morning out of the blue, the Voice Control started coming on.  It doesn't matter what I am doing.  Also, the screen keeps locking up.  Any screen I am on.  I do not use ear buds and it hasn’t been wet.  Please help

I tried the reset and it did not work.  What happens is I will go to an app.  (Like now I am in the text messaging app).  I am stuck here.  I can reply, create a message, and maneuver through the texting screens, but I am stuck in text messaging until I turn it off... Then, when I restart and go to any other app, I get the same thing.
Then there is the voice command.  The thing that allows you to speak a command, such as call office, or facetime...  It pops up randomly. 
All of this started this morning.  I haven't dropped it, gotten it wet, or anything.  I don't understand. 

Similar Messages

  • Voice Control and phone lock

    Hi everyone,
    I was testing my new iPhone 4 while I noticed that, despite the fact that there's a passcode set in order to use it, Voice Control still works.
    So even if a person does not have the passcode, the phone is allowed to make calls, play music and do everything Voice Control allows.
    Isn't that.. wrong?
    Or am I missing some different angle for this function?
    Regards,
    M

    Settings->General->Passcode Lock->Voice Dial
    You can turn it off there.
    Regards,
    -Peter

  • I activated voice over and screen display is not shown and when touched, says time and "screen locked"

    activated voice over and screen display is not shown and when touched, says time and "screen locked"

    Hi muhsinmuhmmed,
    If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
    Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
    https://discussions.apple.com/thread/3933512
    Regards,
    - Brenden

  • HT201441 i cant find a way to contact my iphone previous owner and its locked i need help

    hi i cant find a way to contact my iphone previous owner and its locked i need help

    There is nothing anyone can do for you.
    You need the previous owners password to unlock the phone. If you can't get that, then your phone is useless.
    Nobody, not even Apple, can unlock it for you.

  • TS4079 4s 's voice control and siri suddenly operate by themself without touching

    Hi. My 4s 's voice control and siri suddenly operate by themself without touching the phone all the time. Tried to swiitch off and when reopen still status quo.Possible that my phone got virus? What should I do?

    This is definitely not a virus. There is no known malware capable of infecting iOS, unless it has been jailbroken (ie, hacked to allow apps from outside the App Store).
    First, try resetting your device. Press and hold both the home button and the sleep/wake button for about 10 seconds, until the screen turns off. Ignore the slider that will appear. Release the buttons, then press and hold the sleep/wake button until the Apple logo appears. This is the equivalent of a reboot, and should not affect your data or apps.
    If that doesn't help, try restoring your device from backups, and if that doesn't help, restore it to factory settings (ie, do not restore a backup). See:
    http://support.apple.com/kb/ht1414
    If none of that helps, the issue is caused by some kind of hardware problem, and the device will need to be repaired or (more likely) replaced.

  • Silencing the iPhone Voice Control

    My iPhone sounds a confirmation tone whenever I press and hold the home button to activate voice control, even if it's in silent. The only thing I can do is go into voice control, and turn the volume all the way down, but then it stays silent when the phone is in ring mode.
    Is this behavior default? If it is, it makes no sense.
    What can I do about it? (I talked to an Apple representative and he said I could disable voice control via restrictions, but said ability has elluded my efforts)

    saxplayer2192 wrote:
    (I talked to an Apple representative and he said I could disable voice control via restrictions, but said ability has elluded my efforts)
    You can disable access to voice control when the iPhone is locked, Settings>General>PassCode Lock>Voice Dial Off.
    But, that is the only way to disable it. You can leave feedback here:
    http://www.apple.com/feedback/iphone.html
    Message was edited by: wjosten

  • Unexpected voice control and headphone use

    We have two iPhone 3 G's in our household that we have used without incident up until this last month. With one phone, my husband used a new set of ear phones (not Apple) and the voice control would come on unexpectedly, over and over to the point that he couldn't listen to music.  The same thing started happening with my phone this last week while listening to music with the Apple ear phones. While trying to cancel the voice control over and over, I noticed that the music files sounded corrupt.  Any suggestions?

    I can use my Jawbone 2 to activate voice control just fine. As if it were any other phone that has had this technology for years.
    As far as using "Activate Voice Control and request(ing) whatever", the 3rd contact on my Favorites list can get me hookers and crack cocaine, so does that qualify?
    Summary: Click on button at the top of my Jawbone -> Activates Voice Control -> Say "Dial. Lou. Mobile" -> Wait a few seconds. Say "Lou. Me. The usual." -> press center button on Jawbone to disconnect. -> go back to watching Sports Center.

  • Voice Control and the main menu keep popping up

    my ipod touch 3G has some interesting problems. the voice control and the main menu eep poping up and there are seems like nothing i can do. i already tried rebooting, but it didn't help. any ipod expert can help?really appreaciate.

    hi,
    Can you do a right click > properties on the Network Controller and on the details tab > dropdown menu, copy the hardware ID and post it here to find out the model/maker of the wireless card.
    Guide:
    Windows 7: Hardware Identification
    Btw, were you using the ethernet cable a while ago when you downloaded the WiFi driver on the Y510p? If yes, can you try to reinsert it in and ensure fully contacts the ethernet (it'll usually make a click sound). When finished, press the Windows Key+R then type ncpa.cpl and ensure that the Ethernet connection doesn't say disabled or Network Cable Unplugged.
      - Sample screenshot
    As for the other devices that has yellow exclamation marks, these drivers should fix it (you may download these on another PC and install it on the Y510p).
    SM Bus Controller:
    Intel Chipset Driver
    v9.4.0.1017
    Universal Serial Bus (USB) Controller:
    USB 3.0 Driver
    v2.0.0.102
    or
    Genesys USB Mass Storage Device
    v4.3.0.3
    Unknown device:
    Lenovo Energy Management
    v7.0.3.4
    Regards

  • Voice control and scrolling

    I accidently turned on the voice control and now it seems she is also controlling the scrollong on my phone as well !! I have an I phone 3 and I actually got her to shut up but I am still not able to scroll or move around on my phone. I cannot get to the settings to try to do what the manual says so I really don't know what to do ......can someone PLEASE help me ??? Thank you !!

    I can use my Jawbone 2 to activate voice control just fine. As if it were any other phone that has had this technology for years.
    As far as using "Activate Voice Control and request(ing) whatever", the 3rd contact on my Favorites list can get me hookers and crack cocaine, so does that qualify?
    Summary: Click on button at the top of my Jawbone -> Activates Voice Control -> Say "Dial. Lou. Mobile" -> Wait a few seconds. Say "Lou. Me. The usual." -> press center button on Jawbone to disconnect. -> go back to watching Sports Center.

  • HT4972 My iPhone 4S froze and was locked at the connect-to-iTune graphic page after I attempted to upgrade the software to 5.1.1. I don't know what to do with it now!

    My iPhone 4S froze and was locked at the connect-to-iTune graphic screen when I attempted to upgrade the software to 5.1.1. It is now dead!

    5.0.2 has not been released, thus you can not upgrade.
    Stedman

  • When will we be able to rate music using voice control and Siri?

    It's pretty cool to be able to control the music app using voice control, but we really need to be able to rate songs too. I mean I can do everything else I need to do with my music with the voice control, except rate music, and always rate every song when I listen to it. Then, once they're all rated, I create a smart playlist with my top rated of that artist and just sync them to the iPhone, so you can see how important rating it to me as well as many, many more iPhone users.
    But, let's say I'm listening to music while I'm running and the iPhone is in an armband. I pretty much can't rate any music then, which *****. So, how about a little surprise with the iOS 7.0.3 update. Throw in the ability to rate music using the voice control and Siri. It's not just because you need to fix bugs and focus on future projects that you can't go back and add some cool updates to some of the old features. It would probably take on of your developers like 15 mintues to code it into the OS.
    Let's have a happy update soon. Remember, iPhone 4 users are still Apple customers, too and I'm sure the Siri users would like that as well.

    Only Apple would know their future plans and they haven't said. Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • How do I get my phone out of voice control and can not scroll or use it

    How do I get my phone out of voice control and can not scroll or use it?

    press the home button and hold it for a few seconds. Voice conrol will appear

  • Voice control and play order

    I noticed that playing songs by artist via the voice control feature ("play artist whoever") results in all the albums being played +as albums+. By contrast, if you select an artist from the menus, and play "all songs", it plays them in alphabetical order by song.
    Since I prefer to listen to albums in the original order, this is an unexpected benefit to the voice control feature.
    I just wish they'd bring back the "shuffle by album" feature; I miss that.
    Anyone notice any other useful quirks?

    I can use my Jawbone 2 to activate voice control just fine. As if it were any other phone that has had this technology for years.
    As far as using "Activate Voice Control and request(ing) whatever", the 3rd contact on my Favorites list can get me hookers and crack cocaine, so does that qualify?
    Summary: Click on button at the top of my Jawbone -> Activates Voice Control -> Say "Dial. Lou. Mobile" -> Wait a few seconds. Say "Lou. Me. The usual." -> press center button on Jawbone to disconnect. -> go back to watching Sports Center.

  • IPhone 5, Icons and screen suddenly become large, Very hard to switch phone off , when I switch phone back on all icon back to normal ? My phone is 1 year old.

    iPhone 5, Icons and screen suddenly become large, Very hard to switch phone off , when I switch phone back on all icon back to normal ? My phone is 1 year old.

    Switch off Zoom: Settings > General > Accessibility > Zoom  OFF

  • Xfce4: Problems with Sound and Screen Locking on ASUS G53S

    Hello everyone,
    I recently installed Arch for the first time, and decided to use xfce4 for my desktop environment. Everything seems to work well after I followed the instructions given in the wiki, except for the sound and screen-locking functionality. Regarding the sound, I made sure that my user account is added to the audio group, and installed the gstreamer1.0-base-plugins and gstreamer1.0-good-plugins packages. The xfce4-mixer applet starts up without any warnings and recognizes the available devices, but I am still not able to hear any sound. The "Lock Screen" applet simply does nothing upon being clicked. Do you have any ideas as to what I should try in order to fix these problems?
    Thank you very much!

    To be able to lock the screen you have to install and configure a screen locker or screen saver, e.g. xscreensaver, slock, i3lock, maybe combined with  xautolock. When you use a screen locker and not xscreensaver, XFCE might not recognize it. Then create a symlink in /usr/local/bin/xflock4 or use a shellscript if you need to pass parameters.
    My configuration: xautolock with i3lock. /usr/local/bin/xflock4 is this executable shellscript:
    #!/bin/sh
    xautolock -locknow
    xautolock is started in the XFCE autostart with this commandline: xautolock -locker 'i3lock -d -i ~/Bilder/arch/arch-linux-lock.png'
    PS: If you like i3lock and need user switching capabilities, I can give you a patch where Ctrl-S calls a custom command (gdmflexiserver by default)
    Last edited by progandy (2012-06-17 14:19:12)

Maybe you are looking for

  • SAP B1 Certification on 8.8

    Hi Experts I wants to do certification on 8.8 in SDK (Technical Consultant). I have provided my S-User id by the company. I wants to ask few question regarding this : 1. How can I do certification through online Portal of SAP or I have to go a author

  • Firefox 'freaks out' by going back several pages or zooming in or out when filling in a text form on a website

    == Issue == I have another kind of problem with Firefox == Description == At different websites, when I try to type a message into a text form box (Example: Fark.com comments section) the firefox browser will somehow move back 5-6-7 pages as if I had

  • ITunes store seriously messed up

    The iTunes webstore is seriously messed up. Searches for popular artists don't function properly, and the links to their pages and their albums don't work. Try a search for "Strunz & Farah", Grammy-nominated artists who've sold a million records. The

  • Considerations for 802.1x Port Based and Wi-Fi Certificate Authentication

    Lately, we have been going back and for with the thought of doing certificate authentication for Wi-Fi and Port. We have Server 2012 PKI and CA and it seems fairly straight forward to pump out a certificate to a user and have them authenticate with t

  • Append Clob

    Hi! I have a stored procedure that loops through a resultset and appends the CLOB variable. Below is the code. I have problem using DBMS_LOB.Append. When I execute the procedure, it gives an error (Could find LOB Locator). Code start- PROCEDURE ABC(p