Help! iPod displays restore message after waking from hibernation
For the past week, every time I wake my fifth generation iPod from hibernation, I get a message telling me to connect my iPod to a computer to restore it. This message will disappear after a minute or so and the screen will go dark. If I press a button after this happens, the iPod will go thru the reset process (apple logo appears and it reboots itself). After this it is fine until I leave it long enough for it to go into hibernation again, in which case the whole process starts over. I've been afraid to connect it to my computer for fear I'm going to lose all my music. Has this happened to anybody? Any suggestions?
Yea, I could...but I want to avoid that if at all possible. The weird thing is that it works fine once that message disappears from the screen. I don't know if i should just ignore since it still plays all my music..or else restore it.
Similar Messages
-
System Time is Incorrect After Waking From Hibernation
If my MBA runs out of battery when its asleep, after coming back to life, the system time is wrong. The time is correct when it comes back from normal sleep.
Message was edited by: DrFooMod2 -- Corrected OS versionHi
Same here. On PC boards the clock is usually buffered by a small battery.
Maybe there is no battery in the MBA. But the clock is synchronized over the internet by asking a time server. So you dont need to do it manually
HTH
Enno
DrFooMod2 wrote:
If my MBA runs out of battery when its asleep, after coming back to life, the system time is wrong. The time is correct when it comes back from normal sleep.
Message was edited by: DrFooMod2 -- Corrected OS version -
Display will not sleep any more after waking from sleep
My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
Any suggestions? Anyone else ever see this? Seeing it now?
Thanks!This is still an issue for me.
I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
Sometimes a reboot fixes it, sometimes I have to reset the SMC.
Any info out there? -
10.8.3 - Messages still out of order after waking from sleep or restart
This bug is still present in Messages, although it was supposed to be fixed with 10.8.3.
I've tried both the App store update to 10.8.3 as well as the combo updater. When I check Messages' version after each, it's 7.0.1 (3318), and the copyright date is 2002-2012. So I'm assuming that the application is not being updated, although I don't know what version of Messages was included in 10.8.2.
Anyone else have the same problem?Hi,
It is the same app version and build number.
The Apple Doc linked from the COMBO download page states the "fix" applies to Messages on waking from Sleep and at no other occasion.
It seems that people are also reporting the iMessages are out of order during the Sync (sort of a Known Issue since Messages beta when New iMessages are Instant and mix with a Sync that is in progress).
They are also reporting them out of order even when not syncing (i.e. the Mac is On and Awake just not the device in use).
Of these some people are reporting that in some cases the restarting of the app restores the correct order.
It seems this may be the ones that arrive as New during the sync process rather than other occasions.
What is not clear is what steps might help.
Obviously removing the Apple ID in the Mac Version (Sign Out) and shutting the app, restarting it and adding the Apple ID again sound more involved than a fix should be.
However refreshing the Link to the server may be the way to go.
9:16 PM Thursday; March 21, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Macbook Pro restart after waking from sleep
Hi all,
Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
Thanks!Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19675376#19675376 -
How to Display a message after inserting row in table............
Hi
I want to display a message after inserting rows in table like *'you have inserted a new row successfully*'.
i am using the createinsert ADF Button to insert the rows in table.after that i am comitting it.
after commiting i want to display message for the user.for this what i need to do.
Please help me.
Sailaja.user10860137
Can you please explain me the each line in the code briefly.
+public String saveButton_action(){+
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
+// note "!" operator has been removed from the default code.+
+if(operationBinding.getErrors().isEmpty()){+
FacesContext ctx = FacesContext.getCurrentInstance();
FacesMessage saveMsg = new FacesMessage("Record Saved Successfully");
ctx.addMessage(null,saveMsg);
+}+
return null;
+}+
And i have requirement to show the message on favcet "status bar".not in a popup window.(from the above code the message is showing in popup window. )the Layout i am using is PanelCollection.
can you tell me what i need to do.
Thanks
Sailaja.
Edited by: sj0609 on Mar 19, 2009 8:03 AM -
Network connection after waking from sleep
Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
http://docs.info.apple.com/article.html?artnum=304482 -
Kernal panics after waking from sleep on MBP
I have a client machine that continues to crash after waking from sleep. Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
Here is the first log:
Interval Since Last Panic Report: 42291 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Mon Jan 21 14:40:59 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807e493870 : 0xffffff8000220792
0xffffff807e4938f0 : 0xffffff80002c4794
0xffffff807e493aa0 : 0xffffff80002da55d
0xffffff807e493ac0 : 0xffffff7f816c6e1f
0xffffff807e493ca0 : 0xffffff7f816e3c05
0xffffff807e493ce0 : 0xffffff7f816c5257
0xffffff807e493d10 : 0xffffff7f80c9a832
0xffffff807e493d50 : 0xffffff7f8174d4f0
0xffffff807e493da0 : 0xffffff7f8174f692
0xffffff807e493de0 : 0xffffff7f8174f7c4
0xffffff807e493e20 : 0xffffff7f80c9e4c5
0xffffff807e493e60 : 0xffffff7f80c9e628
0xffffff807e493e90 : 0xffffff7f80ca1fd7
0xffffff807e493ef0 : 0xffffff800063d4d6
0xffffff807e493f30 : 0xffffff800063c250
0xffffff807e493f70 : 0xffffff800063c0f4
0xffffff807e493fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 42049368948948
last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 16384)
last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AudioAUUC 1.59
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14100000 / 4
Second log---------------------------------------------------------------------------- -----------------------------------
Interval Since Last Panic Report: 18613 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Wed Jan 30 13:21:54 2013
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ef03810 : 0xffffff8000220792
0xffffff807ef03890 : 0xffffff80002c4794
0xffffff807ef03a40 : 0xffffff80002da55d
0xffffff807ef03a60 : 0xffffff7f816d61f1
0xffffff807ef03b70 : 0xffffff7f816d7413
0xffffff807ef03bb0 : 0xffffff7f816c6e31
0xffffff807ef03ca0 : 0xffffff7f816e3c05
0xffffff807ef03ce0 : 0xffffff7f816c5257
0xffffff807ef03d10 : 0xffffff7f80c9a832
0xffffff807ef03d50 : 0xffffff7f8174d4f0
0xffffff807ef03da0 : 0xffffff7f8174f692
0xffffff807ef03de0 : 0xffffff7f8174f7c4
0xffffff807ef03e20 : 0xffffff7f80c9e4c5
0xffffff807ef03e60 : 0xffffff7f80c9e628
0xffffff807ef03e90 : 0xffffff7f80ca1fd7
0xffffff807ef03ef0 : 0xffffff800063d4d6
0xffffff807ef03f30 : 0xffffff800063c250
0xffffff807ef03f70 : 0xffffff800063c0f4
0xffffff807ef03fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 18633492210750
last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64 2.0.0 (addr 0xffffff7f810cc000, size 147456)
last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814fc000, size 8192)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.75
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14200000 / 1
Sorry for the huge post. The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it. I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
Thanks in advance for the help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface
I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem. -
After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.
This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
Any and all help is appreciated!
ThanksFWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.
-
BSOD after waking from sleep On XP and Vista
Hello my name is Santiago. I have started getting BSODs after using sleep lately. I get BSODs after waking from sleep on windows Vista. I upgraded to that recently, and that is when the problem started. It was working fine for a few days then it just bluescreened, I have switched back to XP and see if it was with only vista. but it was not I do not know what to do any more. may any one please help me?
This is what the blue screen says
http://pwimage.org/images/l9ix40o7yfyfhjwd63i6.jpg
the model is a T60 think pad.
Message Edited by spena09916 on 11-21-2008 01:35 PMHello Santiago,
the link doesn't work anymore...
So i'm just guessing:
• did you check your memory? Might be a failure in a module.
• you should update youre drivers. Use the system update tool.
• did you try a recovery or new installation of your system? if the BSOD still occurs, there really might be a hardware failure... do you still have warranty?
Cya
Omar -
Black screen after waking from sleep mode - Compaq Presario CQ5110F
My mother's computer has been having the problem listed in the subject -- after waking from sleep mode, the monitor just stays black, and won't come back. After trying everything I could find online, I eventually found the bios update which claims to fix the exact issue. The problem is that I guess my mother had opted to upgrade to Windows 7, while the bios update seems to only work for Windows Vista, as I get the following error message: "Your system does not meet the minimum requirements for this update. Update has been canceleld. (9998)." I've tried running the update in Vista compatibility mode, with no luck. I've tried using a different monitor, I've updated all the drivers, Windows Updates are all current, I've cleared CMOS. Any idea on how to fix this? It's very recent; only for about the past 2 weeks has this been happening, while we've had the computer for over 3 years. It's quite a waste of energy to keep it on all day.
Hello liltwix,
When taking your computer out of safe mode the screen just remains black, is that correct? I will try to help you with this issue.
I understand you upgraded from Vista to 7, was that when the issue started or has the computer had windows 7 installed for some time before this problem started?
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
Ethernet slow to connect after waking from sleep
Since installing Lion (and updating to 10.7.1) on my 2008 24" iMac I have noticed that after waking from sleep the internet connection takes about 10 seconds to restore. I have reset the SMC and PRAM and performed a safe boot (in case this helped) but to no avail. The slow conenction can be observed if after waking from sleep the Network System Preference is clicked and the ethernet status "light" is red, changes briefly to amber and then green indcating a connection. The iMac is connected via an ethernet cable to a Linksys 802.11n 4 port wireless router.
I also have a 2010 13" MacBook Pro, with the same OS, and version, conencted in the same way to the same Linksys router and it does not exhibit this problem.
This slow internet connection access after waking from sleep is an annoyance and I'd appreciate any input on how to elimnate it.
Thanks to those wiser than I, who might read this note.SOLUTION FOUND!
I've found a list of possible solutions here's the link:
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
I solved my problem moving the Ethernet and WiFi adapters in the top of the list and Bluetooth at the end.
Move Wi-Fi to the top of the Service Order list – This is an old tip that simply prioritizes WiFi as the primary method that your Mac should connect to the internet, and it seems to help maintain connections -
System clock fails to update after waking from sleep
I've noticed that my new PowerMac G5 Dual-Core 2GHz (running Mac OS X 10.4.3) doesn't update its system clock to the current time after waking from sleep.
When I put it to sleep and then wake it some time later, the Clock in the upper right-hand corner doesn't update to the current time. It still ticks on (second for second) but remains out of sync.
Opening the Date & Time preferences pane will restore the time to the correct setting.
This problem only occurs with sleep and then wake-from-sleep. It doesn't happen when I shut down the machine and then restart it.
Does anybody know if I've got a malfunctioning machine? It's only 1 day old...
Or better still, how do I solve this problem?
PowerMac G5 Dual-Core 2GHz Mac OS X (10.4.3)No, my Mac is not having trouble contacting the time server. I checked the console log and found no messages related to this.
I am on a broadband always-on connection (recently switched from DSL to cable modem, and the problem occurred under both connections). However, my original post states that the computer loses time only when it is asleep, and I didn't think that my computer could contact the time server when it is asleep. It also loses time when it is off, which I neglected to mention previously. Am I mistaken in thinking that the computer communicates over the network only when it is awake? Since it keeps accurate time when awake (once I've reset it by opening the Date & Time control panel), it seems to me like it IS communicating with the time server without issue.
[And I apologize for misinterpreting your question as a suggestion. I was trying to be polite by thanking you for taking an interest in my issue. I'll watch my semantics more carefully next time.]
Cheers,
Katy
G5/dual core 2.3 Ghz Mac OS X (10.4.4) 2.5G RAM -
Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alancoxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.
Maybe you are looking for
-
Which Macbook Pro is good for a college student?
Hi! I want to buy the new Macbook Pro with Retina Display. My current laptop has 455 gb in which I only used 83 gb of it since the past 5 years I've been using it. I know that the original macbook pro is good too but its way heavier than the Macbook
-
My logic board failed, and I need to buy an external hard drive. Can someone walk me through the process of doing this? Will the Genius Bar do it for free? Also, I have a borrowed Mac right now. If I put the new hard drive on this computer will it er
-
Problem in Adding link to Masthead
Hi All, I am a beginner in Portals I want to add an extra link to the masthead. For this I have done folowing steps 1. Masthead PAR download 2. Import this PAR into NWDS 3. Make changs in portalapp.xml - Adding Component Profile properties for standa
-
I can't open my refurbished palm pilot m500
so I bought this palm pilot m500, have down loaded the software, charged and connected to my computer, and when I go to open the hand held it says "test" or assign log pad.... what is this? I just want to use the silly thing! and I can't find these i
-
Conditional display in the row template!
Hi, I created a report template and my report shows like this: col1 col2 col3 col4 col5 a 4 5 6 7 b 4 8 7 2 Total 8 13 13 9 I am able to display all the above, but the column name should be "Total" at the end of the report when i am displaying the to