HELP! iPod Erased, Can't put files on it

My iPod got completely erased, now in itunes when I try to put music on it, it just doesn't show up on my iPod, but itunes say it is there.

And since you don't have anything on your ipod, you could try doing a 'restore'. When you installed your ipod software, an updater was installed.
After trying the standard stuff, try restoring your ipod by plugging it in and running the updater. Select the restore option. This will erase your ipod and completely restore it to the state it was when you got it. This is usually a pain in the neck because you have to resynchronize your ipod afterwards, but since your ipod is empty anyway it should be quick and painless.
DO NOT DOWNLOAD THE 1.1 UPDATER FROM APPLE'S SITE. The 1.1 updater is severly defective and will cause you and your ipod to suffer mental illness.

Similar Messages

Suddenly can't put files to remote server

Hi there,
In Dreamweaver 5.5 (OS 10.7) I suddenly can't put files to the remote server. I've been using Dreamweaver for just over a year and this has never been a problem before. My site is: www.peawitpress.co.uk
The updated files go through the normal process of being "put" to the server (I don't get an error message or anything when synchronising), but when I check the live site the changes don't appear. I've tried refreshing the page and emptying the cache, but nothing seems to work. I've verified that I can connect to my web server and have verified the root directory and they are both fine.
The only thing that is unusual when synchronising is that (for the past day) the six files in the attached screenshot always want to synchronise (even though they haven't been updated). I deleted them from the site and added them again in case they somehow became corrupted, but they still randomly want to synchronise.
Any suggestions? It seems like there would be an easy solution for this, but I can't figure it out. Any help would be hugely appreciated!
Thanks and best wishes,
Alexandria

This has happened to me a few times in CS6. I think it's a memory thing.
Close DW. Reboot your computer. Open DW.
If you still cannot FTP to server, go to Site > Advanced > Recreate Site Cache.
Nancy O.

Can't put files into nested folders in dock

Whenever I try to put a file into a folder I have in my dock, it will only let me put it in the first level of the folder. Ideally, I would want the folder to pop open and show the next level of folders so I can navigate through levels of nested folders to put the file in the exact place I want deep within my folder hierarchy. I know I can hold down Control on a folder in the dock to show my nested folders, but how can I drag files into those nested folders? I thought this was supposed to be automatic in Tiger. Please help.

Yes- Easy!
When you have your Creative Media Explorer open and your portable device connected, you will see your Zen V Series Media Explorer in the SOURCE window in the upper LH corner. Click on the "+" in front of the Zen V Series icon and it will display the list of folders on the device.
Right click on the main folder for the category you want to put the sub folder in and you will get a drop down menu.
Select "New folder" and you will get the "New Folder" box asking you what name you want for your new folder. It's that easy.

Can't put files with FTP

I’m trying to transfer a site with Dreamweaver 8
(Windows) to CrystalTech. I can connect and transfer files okay
with WS_FTP. Hitting the “Test” button in
Dreamweaver’s site definition dialog returns a successful
test. But when uploading the site, the usual progress bar appears
and disappears rapidly, and no files are transferred. There is no
error message. The Dreamweaver FTP log is empty. This is the first
time I have tried to use Dreamweaver’s FTP to transfer a
site, although I have put files over the LAN before. Here is the
site definition remote info:
Access: FTP
FTP host: josephherl.org
Host directory: [blank]
Use passive FTP is checked [as instructed by
CrystalTech’s website]
Under “Server Compatibility,” “Use FTP
performance optimization” is checked, “Use alternative
FTP move method” is unchecked
Edit | Preferences | Site | Firewall port is set to 21
For what it’s worth, the testing server is set up on my
local machine and works fine. The machine is at my university.
I have tried:
using the IP address for the FTP host;
specifying a host directory [CrystalTech’s website
says to leave it blank];
unchecking “Use passive FTP”;
changing the settings under “Server
Compatibility”;
disabling Windows Firewall; and
double-checking that the local root folder is correct.
Thanks in advance for your help.
Joe Herl

Do you need a testing server? That is, are you building PHP
pages?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Herl" <[email protected]> wrote in
message
news:ecvl5g$bjp$[email protected]..
>> HOw do you have the three parts defined in DW (local
site, remote site,
>> and
> > testing server)?
>
> Right now I have this:
>
> Local info:
> Site name: Music 313
> Local root folder: C:\htdocs\chmu313
> Refresh local file list automatically is checked
> Default images folder is empty
> Links relative to document is selected
> http address:
http://josephherl.org/chmu313
[I left it blank;
> Dreamweaver
> filled it in automatically when I saved the settings]
>
> Remote info:
> Access: FTP
> FTP host: josephherl.org
> Host directory: chmu313/
> Login: chmu313
> Use passive FTP and Maintain synchronization information
are checked
>
> Testing server:
> Server model: PHP MySQL
> Access: FTP
> FTP host: josephherl.org
> Host directory: chmu313/
> Login: chmu313
> Use passive FTP is checked
> URL prefix:
http://josephherl.org/chmu313
>
> [All the information in the "testing server" category
was filled in
> automatically when I selected FTP under "Access."]
>
> The above configuration works. My previous configuration
was the same for
> "local info" and "remote server," but I had the
following under "testing
> server":
>
> Server model: PHP MySQL
> Access: Local/Network
> Testing server folder: C:\htdocs\chmu313\
> URL prefix:
http://localhost
>
> That configuration did not work.
>
> Joe
>

How can I put files inside an empty .zip file with Mac OS X?

Hi all,
I'm learning to produce epub files (i.e., ebooks). I'm told by tutorials that I need to zip several files together, but I must start from a specific file and put that file first into the .zip archive… then the others.
I can't find ways to put files one after another inside a .zip archive using Mac. Anyone can help?
Thanks in advance,
lux

Donald Palmer wrote:
Create a folder.
select file to zip.
right click on file.
choose compress.
put resulting file in newly created folder.
No, first file must stay uncompressed until the final zipping occurs.
I found the answer by browsing around. There is a nice AppleScript called ePub Zip (http://www.mobileread.com/forums/showthread.php?t=55681) that just works.
I read around that it can be done via Terminal with two commands:
+zip -X0 "full path to new epub file" mimetype+
and
+zip -rDX9 "full path to new epub file" * -x "*.DS_Store" -x mimetype+
I didn't check it though.
Thanks for the support,
lux

Can't put files on desktop

For some odd reason I can no longer put files on my desktop. If I take a screen shot, they appear in the desktop folder of the Finder, but they don’t appear on the desktop itself. Nor can I drop files on the desktop. When I try to right- or Control-click on the desktop, nothing happens.
Anyone know the cause of this?

Okay, just found the problem. It was a Tinkertool setting. Not sure how it got set like that, but that was the culprit.

Can't Put Files

We got new computers at work. I followed the instructions from Adobe to upload our Dreamweaver CS4 onto the new computers however now when I update in the program I can't PUT to the website. Please help

Thanks Curtis but I've not only refreshed the page (multiple times) but I've looked at the site in Interarchy. The files are NOT being uploaded. Since they're just html files whatever progress could be seen is too fast to see. All I know is that in the site window (or whatever it's called in DW - the list of files with the PUT arrow at the top) I highlight a file, click the PUT arrow, it fiddles a bit, then says "File activity complete" at the bottom of the site window.
After searching for a while I finally noticed the tiny little Log button at the bottom right of the site window and clicked it. This is what it says after supposedly uploading a file:
"Started: 10/27/11 9:38 PM
"index.html - Put operation successful
"File activity complete.
"Files updated: 1
"Finished: 10/27/11 9:38 PM"
However, when I check in Interarchy, the time stamp on the file is still 6:58 pm - the time at which I last manually dragged the file up.
As I said - DW *thinks* it's uploaded the file but it hasn't.

Help me! Can't open file from ID CS2

I can't open file from ID CS2.
Document damaged and cannot be recovered (Error Code: 5)
Everyone to know please help me!
Thank you very much.

CS5 doesn't support that camera. You need CS6 or later or the free DNG converter.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Help! I can't move files from my MacBook to my external hard drive!

Hey all..
I can't move files from my MacBook to my 40GB hard drive! Whenever i try to do that the com will reply that i can't move the files because the hard drive cannot be modified. This never happened before and how can it be solved?
Appreciate all answers thanks..

What filesystem is your external hard drive formatted as?
You can check this with the program called Disk Utility.
My guess is that it is formatted as NTFS, the default filesystem for windows XP. Mac OS X only supports read-only access to NTFS-formatted drives.
Reformatting, and with it erasing everything on your drive, to another filesystem would be a solution if this is the case.
Google recently released MacFUSE which should allow read-write support to ntfs-drives. Not recommended for the un*x-unexperienced, though.
Martin

How can i put files on my iphone 3g

is seen as a digital camera and is seen as an iphone in itunes but how can i put my movies and other stuf on my iphone by just placing the files on my iphone (wifi is broke gona fix it soon)(using most updated version of ios) (using win7 64 bit).

open itunes, connect iphone. select what you want to sync, sync.
iPhone User Guide (For iOS 5.1 Software)

My itunes got erased, can i put the music on my ipod to a new itunes?

There was somthing wrong with my hard drive, and I had to take it to the apple store and they erased everything on my computer and put in a new hard drive.
My itunes and all my mp3's got erased, but I still have them on my ipod.
can I some how get my music back on my new itunes?
Mac OS X (10.4.8)

gnemati,
Welcome to Discussions.
You can use Senuti or iPodRip to transfer the songs from the iPod to the computer.
They might not get all playlists back, but they do get all music files.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.2

I have downloading music screen , but it says store busy can not connect. I have itunes cards and can not get to the store to use them. help me please tried all weekend got first ipod and can not put anything on it yet. hel p

WILL SOMEONE HELP ME PLEASE I GOT A EMAIL STATING EVERYTHING LOOKED FINE FROM ITUNES END, BUT I CAN NOT USE AND SEE THE MUSIC FROM THE STORE/ HELP

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.

For some reason I cannot delete files off my desktop without putting my password in and even when I do I still can't delete and I also can't put files on my desktop at all ! but when I look at my desktop it gives me a silver lock? Please help me?

when I go to find my desktop in Finder it shows a folder and a silver lock ? PLEASE HELP ME !

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

Suddenly can't put files to remote server (again)

Hello,
In Dreamweaver 5.5 (OS 10.7) I suddenly can't FTP to the remote server. I had this problem a couple months ago (http://forums.adobe.com/message/5145574#5145574) and it was fixed by the following suggestion:
Close DW. Reboot your computer. Open DW. If you still cannot FTP to server, go to Site > Advanced > Recreate Site Cache.
This worked for me the last time, but unfortunately it hasn't solved the current problem.
At the moment, the updated files go through the normal process of being "put" to the server, but the changes don't appear when I check the live site. I've tried refreshing the page and emptying the cache. The files seem to be uploading to the correct location (they are not being put into a sub folder or anything). I've verified that I can connect to my web server. I haven't changed anything in my site definition and this problem just appeared out of the blue.
Just like when this happened to me before, there are random files that want to synchronise (even though they haven't been updated), but nothing changes on the remote server. I've also tried to synchronize by 'deleting remote files not on local drive', but that doesn't help.
Here is a glimpse of my current FTP log, in case that is useful:
Any suggestions would be hugely appreciated. Thank you!
A

Hi drstir,
Can you check out the solutions in this document, and let us know if you still need help?
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html
Thanks,
Preran

IPC vs. iPod Shuffle, can see music files on my iPod?

I have downloaded iTunes onto my pc, but when I attempt to open my ipod shuffle, I either get rerouted to hte music library on my computer OR the only viewable file is "autorun". I checked my ipod and all the music is on there???

Hyphen says:
[The] drive can be formatted as fat32 and be read/written by macs. He could also partition it, one partition as hfs+, the other as fat32. This can be done from disk utility.
The NTFS format (windows) has only read support for OS X.
How did s/he copy the music on the external drive? Was the music on his/her pc? If yes the hierarchy may be different for the pc version of iTunes library, or is it that he can't find the files even from the finder?
And Red Dwarf adds:
Just to add to hyphen's reply, FAT32 has a maximum size of 32GB. The user cannot make the partition larger than 32GB should they decide to go down that route.
Another alternative is a utility called TransMac. When installed on a PC, it will allow the PC to recognise a Mac OS formatted drive and read the files within. No need then to worry about all that FAT32 and NTFS malarky stuff. It weighs in at $64 dollars though for a 1-3 user licence:
http://www.asy.com/
So hopefully, with Kappy's help, too, you will be able to figure it out.
Good luck.

HELP! iPod Erased, Can't put files on it

Similar Messages

Maybe you are looking for