HELP!!!! Ipod problems with library

so heres the deal...
somehow my whole itunes library got erased but the music on my ipod did not
so i just got a new ipod and would like to transfer my old music from my 30gb to my 80 gb
but there seems no way to transfer the music from my ipod back onto my library or computer

"there seems no way to transfer the music from my ipod back onto my library or computer"
Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here, you also need to check which of them have been updated for Vista: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
YamiPod Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

Similar Messages

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

[PLEASE HELP!] Problems with iPod Classic 160GB.

Okay, I was about to sync my iPod Classic 160GB and go to bed. I plugged it in and everything was good. I am not sure if it was syncing yet, but it fell off the cord because my HP laptop moved. I wasn't worried at the time, The apple screen came up so I pressed Middle Button+Menu to reset it, then I plugged it back in. When I plugged it back in it said I had to format the drive in G.. The screen of the iPod said Connected Eject before disconnecting and had the circle arrows like when it is loading. It seems to be working fine when I unplug it.
But anyways, When I unplugged it a second time (I did click Disconnect in the toolbar on the actual device, not in iTunes) it didn't work again, and it brought up the grey apple screen again, then went to the language. so I plugged it back in. Then I said OK to the reformat. I clicked Default settings to the format and left the Volume Label blank because I don't know what that is...
It said WARNING: Formatting your iPod will delete all files on it, or something along the lines of that. so, I said okay, I'll just resync it, just get on the reformat. When I clicked format it said that it couldn't format my iPod... So, once again, I disconnected it, ejecting from the actual device in the toolbar, and it was absolutely cleared asking me for the Language. It keeps doing this every time I plug it in, and even when I switch USB slots. it wont read into my iTunes either.
I am really sad, and please answer because my iPod is basically my life, this is my worst nightmare come true.
PLEASE ANSWER QUICK, Thanks...
-Fess

I had a simalar problem with mine about 6 months ago. I formatted my ipod to and it completely fried my ipod. I had;the same ipod and it was just out of warrenty. Yours might be fried,take it to a genius bar. I ended up getting a used iPod because I had to have music.
**** I am no tech wizard*****
So Sorry about your iPod...

Help intermittent problem with logging in

Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???

The clients login window just shakes and won't login. I did find one thing that helps some of my Mac Lab woes.
Some students get a dock that only has 3 icons. These students also will have saving and printing problems when they get this default dock.
I think some of the problems occur when the student gets over quota, some preference files get corrupted.
1. Student will login.
2. Open the student's home folder. Then open Library and Preferences.
3. Find the file com.apple.homesync.plist and delete it.
4. Empty Safari Cache and the user's Trash Can and make sure they are not over quota.
5. Logout and login.
This will fix some problems, but not the problem when students can't login at all.

TV Show download problem with library on a network share

My local drive has 100GB disk space available. I have my iTunes library configured to be on a network share which happens to be on a NAS (network attached storage) drive. My NAS drive has over 600GB disk space available. When I try to download a TV Show (Battlestar Galactica) I get an error which says that:
"The disk you are attempting to use is full"
This is nowhere near true. I tried several times, then switched my iTunes library to point to my local drive, and the download worked. Does iTunes have a problem with a library on a network share?
Help!
Thanks,
Brad

Not easy because in order to open just one library file you would have to be running the same version of iTunes on all computers which would be limited to the lowest version supported by your computers (the G3). Try to open a iTunes 10 library with 9.2.1 and it will refuse. This in turn might not support your equipment. Even if you can do this you would have to make sure only one copy of iTunes was running because the library file cannot be opened by multiple copies of iTunes at the same time.

Could not install 10.5.3 for ipod -- Problem with the windows installer

"There is a problem with the Windows Installer package. A program required for this install to complete could not be run. Contact your support personel or package vendor."
What program needs to run?
Apple has 68 billion dollars in the bank and they can't get a program running?

It's more like your computer can't get it running.
What have you tried to do to troubleshoot the problem? By the way, it might be more helpful to post this in the iTunes forum since it's related to the iTunes application as this forum is for the iPod Classic.
https://discussions.apple.com/community/itunes
B-rock

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

Help please problem with export

I had some problems with safari on my imac (OS X) so I did some "repairs" I ended up deleting some keychains and I believe that is what cause the problem I'm having. However I don't know how to fix it.
When I try to export RAW images from my Lacie rugged external hard drive to the desktop into jpg I get this error...
"An internal error has occurred: ?:0: attempt to index field 'rootFile' (a nil value)"
I have a deadline very soon (in about an hour) and need help please.

Fantastic, these things always happen at the most inconvenient time!!!
When you've got the job out of the way reboot the Mac and try the export to desktop again. If it is still broken then in Disk Utility run Repair Permissions on the Mac and La Cie.
Who do I send the bill to???

Help! Problem with reading objects from file

I wrote a "Library" program for an assignment, and one of the requirements is that the library store all of its information to file upon exit, and reload this information from file when run.
Well, the writing to file part is working. I'm using a FileOutputStream object and an ObjectOutputStream object. I can tell from the file size of the .dat file that information is going into it.
But what I can't do is read from file. For that, I'm using a FileInputStream and an ObjectInputStream. I keep getting this exception:
java.io.EOFException
     at java.io.DataInputStream.readInt(Unknown Source)
     at java.io.ObjectInputStream$BlockDataInputStream.readInt(Unknown Source)
     at java.io.ObjectInputStream.readInt(Unknown Source)
     at Library.readDataFromFile(Library.java:350)
     at Library.<init>(Library.java:63)
     at LibraryDriver.main(LibraryDriver.java:6)I looked this exception up and it says it's thrown when a data input stream unexpectedly ends....But I am instantiating the input streams just before I try to read from file:
                        fileInStream = new FileInputStream(libraryFile);
               objInStream = new ObjectInputStream(fileInStream);
               Object[] objectArray = new Object[objInStream.readInt()];Both input streams have methods that "return the number of bytes that can be read from this file input stream without blocking". Just for kicks, I tried writing that number to the console.
For the FileInputStream, I get 404 bytes.
For the ObjectInputStream, I get 0 bytes.
So I guess it's a problem with the ObjectInputStream? Anyone have any suggestions as to how I can fix this, please?

Yep, here's the relevant code from the writeToFile() method:
                      for (int i = 0; i < libraryAuthors.length; i++) {
                    currentAlphaAuthorList = libraryAuthors;
                    for (int j = 0; j < currentAlphaAuthorList.size(); j++) {
                         currentAuthor = (Author) currentAlphaAuthorList.get(j);
                         objOutStream.writeObject(currentAuthor);
               objOutStream.flush();
               objOutStream.close();

Help! Problem with opening Mail

I've been having a hugely annoying problem with mail and preview, and I nor any of the wizards at my local mac store can't solve it to save their lives. So, I've come here, to the experts.
First of all, neither program will open or provide any errors with any attempt to open it. All that happens is that the icon(s) will bounce in the dock for about three seconds and that's it. So, I checked the crash log in my crashreporter, only to find two crash logs there, one for preview and one for mail. Each returns the same error message:
(this one's for mail; preview is exact with the expected modifications)
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [94]
Version: 2.1 (752)
PID: 733
Thread: Unknown
Link (dyld) error:
Symbol not found: _kCGPDFContextTitle
Referenced from: /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
Expected in: /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
I've looked online to see if anyone else has reported a similar problem, but I haven't found any indication that someone has. I've also looked for the symbol in superuser mode with no avail. One thing though: _kCGPDFContextTitle are associated with opening pdfs, and I think it failed after I reinstalled adobe acrobat prof. 8. I've trashed acrobat, but the problem presists.
I suspect the problem is with coca, but is there any way to fix it without archiving and installing? Suggestions and good wishes will be greatly appreciated. Thanks in advance.

Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PowerPC
Mac OS X 10.4.9 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

PLEASE HELP - Serious problem with my Creative Zen Touch firmware

Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

Help! Problems with an eraser

Hi, I'm new to this forum, and I have a problem with an eraser tool.
I just erased a path, but it becomes like Figure 2!
How can I erase a middle of path, not digging a cave in them.
Thank you!

THat's a closed path, right?
The eraser tool subtracts parts of shapes. View the artwork in outline mode to understand what it does. If you only want to get rid of a part of the path then you need to use the path eraser tool Illustrator Help | Editing paths

HELP -- graphic problem with my MacBook Air

Hi, I have a graphic glitch on my 13' MacBook Air 2012 base model (1.8Ghz i5 Ivy Bridge, 4GB RAM, 128GB SSD, Intel HD 4000)
As you can see from the screenshots below, I have a jagged lines and imperfect rendering of images.
In image 1, you can see that there is a visible line under the iPhone and the shadow looks so weird.
In image 2, you can see that the icons are jagged and the colour gradients don't really blend in.
In image 3, you can see that the colour gradients are not normal.
In image 4, more jagged images can be seen.
I've tried to play some games too (Evoland, Trine 2) and apparently this problem occurs too, that the image quality seems so poor (pixelated lines). However, icons and images on my desktop and launchpad and everything look just fine. It's just images in games and App Store as well as browsers that appear so glitchy.
I've tried to open the Internet using Chrome and Safari, on OS X and Windows using Parallels, and both result in the same poor quality of image.
Does anyone know why I have this problem? I'm on Mountain Lion 10.8.4 and everything was perfectly fine before, I just noticed this problem recently.
I've tried to diagnose the hardware by pressing and holding D in the startup screen but it said there was no problem with my hardware.
It would be appreciated if you guys could help me find out what's the problem with my laptop. Thank you!
Any additional info, please ask. Thank you and hope you guys can help me.
P.S.: I'm currently in Indonesia, and will be soon moving to NZ, and there's no Apple Store in both countries so bringing my MBA to the Geniuses is out of option.

If keys on your keyboard don't work:
http://support.apple.com/en-us/HT203162

I can not get my i-tunes to play correctly, problem with library I think.

I have had this problem for a really long time and I don't know how to fix it. I can open my i-tunes but when I click to play a song it freezes up and says "i-tunes1 not responding." the only way I can get i-tunes to work is to go into programs and repair it.
I think it is a problem with my library, because I have a folder named i-tunes with my songs in it and a folder named i-tunes1 with my i-tunes library and i-tunes media folder in it. There is nothing in my i-tunes media folder. I have tried consolidating my library and stuff but nothing seems to work. Any suggestions?

How many computers do you have authorized to use your Apple ID. There is a limit of 5 computers. Mobile devices are counted differently from computers.
Please see Authorize your Mac or PC using iTunes.

HELP!!!! Ipod problems with library

Similar Messages

Maybe you are looking for