Help!  Ipod won't turn off after disconnecting

Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

for instructions on resetting http://www.apple.com/support/ipod/five_rs/

Similar Messages

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Mac 10.6 won't turn off after update

    Macbook air a1304 won't turn off after updating unless you push on/off button.

    Phone your nearest HP Support  to request warranty service. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • Help! Ipod nano won't turn on after disconnecting!

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    Tuesday, December 02, 2008 7:23:56 PM
    Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
    at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
    I thought it was a goner... I even ordered a warranty replacement..
    ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
    it tried to sync but my playlist did not exist..it even showed the folder in windows
    After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
    I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
    So in short
    PROBLEM;
    ==IPOD Won't Power on when you press the power button==
    (FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
    you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
    Try:
    RESET, and plug in to itunes and restore..
    SOLUTION:
    http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
    Official Apple Documentation:
    http://support.apple.com/kb/TS1383?viewlocale=en_US
    I guess my actual story will make you believe that THIS SOLUTION actually works.
    "Let the iPod battery drain
    In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
    I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
    but mostly freezing up windows.
    4. " Let iPod's battery drain"
    Was the solution for my iPod 3rd generation.
    So now that the problem was fixed, I guess iPod is so terrible after all
    Just don't drop your iPod get it a nice case
    it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
    roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
    I thought maybe the battery was knocked loose but the battery was just so low or something
    To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
    As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
    When it actually does power on you would see the apple Icon
    == When it was all said and done==
    I didn't really need to use "restore" option, i think itunes resynced what it needed.
    And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
    ==STILL DOESNT WORK?==
    If you bought it less than a year ago... Warranty..
    https://selfsolve.apple.com/GetWarranty.do
    Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
    I always like posting solutions, so that someone like me can benefit from it.
    It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
    see here for some frequently asked questions.
    http://www.apple.com/support/ipod/service/faq/

  • HELP!!  IPOD WON'T TURN OFF

    No matter what I do. It's stuck! It won't turn off. Right now it's unplugged from the computer & won't turn off. The battery will run down completely now.
    I also had trouble with my computer recognizing the iPod after I installed the iTunes & software & imported a CD into iTunes library.
    HELP!!
    Lee

    you might try putting it to sleep. go to the main menu and choose settings, and then look around there for "sleep" it doesn't shou up on the main menu by default. select sleep and turn it from "off" to "on" then go back to the main menu and select sleep (press center button) and it should turn off.

  • Charged indicator seems to be stuck, ipod won't turn off!!! help

    I took my ipod running last week and it got a little damp in my trousers!!
    Since then it will not turn off anymore. I have let the battery die down. I have reset it on the ipod and on itunes, but nothing seems to help.
    It just won't turn off, the charged sign (large battery with a plug in it) shows all the time.
    If I leave if as it is over night, the battery is then dead.
    Can anybody help me.
    It's an ipod nano 1gen. not even 6 months old.

    If it got wet, set it in a cool, dry place and leave it there for at least a week. Then connect it to power (preferably a wall charger) and let it charge for at least 30 minutes, then Reset it (hold down the menu and center buttons for at least 6 seconds). If it comes to life, connect it to your computer, Restore it in itunes, then let it fully charge.

  • IPod will not turn off after being used as an external HD in Windows

    I have disabled the option to have Itunes open when I connect my Ipod and I turned off the iTunesHelper in msconfig. This allows me to use my Ipod as an external HD without interference by iTunes. I have found that since upgrading to Ipod firmware 1.1.1, after I disconnect my Ipod using the Safely Remove hardware option in Windows XP SP2 my iPod will not turn off. I just turn on the lock, and let sleep mode set in after 2 minutes.
    This only occurs if I connect the iPod as an external HD and does not occur when I connect the iPod with iTunes open to sync my music library. The problem started with firmware 1.1.1. Is anyone also having this issue, and if so, is there a known solution?

    If you are not past the 2 weeks return period you can just return it.. for sure the TC is not ideal when you want something to store files.. the fundamental issue is lack of backup. The TC cannot back itself up. Nor can Time Machine in the computer backup network drives.
    To mount the TC disk in finder.
    Use Go, Connect to server. in the top menu.
    Type in AFP://TCname.local or TCIPaddress. (where TCname.local is the correct network name of the TC.. ie not its name as typed in, if it includes spaces and illegal characters like apostrophe. You need to find the actual network name from network utility netstat scan or better still use proper naming on the TC.
    Local is the default domain and helps.
    If the TC is in router mode the IP is static and is better used than the name.
    AFP://10.0.1.1 for example with default IP is far superior way to identify a network resource.
    The disk password will be requested. Add it to your keychain.
    It is better to load files to a DMG or sparsebundle.. See Pondini for info.
    Q3 http://pondini.org/TM/Time_Capsule.html

  • My ipod won't turn off what do i do?

    my ipod screen has the do not disconnect sign & it won't turn off.
    how do i turn it off?

    I have a similar problem. Won't turn off and 'MENU' button won't work. Everything else fine including pause/play, volume, skip, rewind, etc. Will not reset. Any suggestions?
    (IPOD MINI)
      Windows XP  

  • IPod won't turn off when plugged into computer! PLZ HLP!

    I have an iPod touch 2g, and now whenever I connect it to iTunes, it won't turn off. It will just turn itself back on.

    If you are unable to give specifics about the problem or what you need to do, it's going to be rather hard to give you recommendations or alternate suggestions.
    As I said, if I recall correctly, the iPod will stay on if it's being charged. But, in case I'm misremembering, are you holding down the button until you see the red arrow that says "Slide to power off"? Have you tried restoring it?

  • My iPod won't turn OFF, this is the third time its happened.

    For the third time, my iPod won't shut off. The last time this happened, I loaded the latest firmware. It has been ok for about three months.
    Now it won't shut off again. It appears to be a software issue.
    Has anyone else had this happen?

    yeah same with me, and its 2 days old too. i didn't get a chance to try resetting it, though, it just worked after a while.
    bloody annoying though, it shouldn't be breaking already
    i'm really happy i got the chance to say bloody annoying though, i hope it's appreciated

  • My ipod due not turn off after it go into water

    my ipod touch 4g due not turn off after it go into water the screen dont work only the block botton and the menu one. if you can answer i will be thank you to you.

    Dry the iPod by:
    How to fix a wet iPod or iPhone | eHow.com
    Then try the standard fixes:
    Reset:
    - Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Retore to factory defaults/new iPod
    If still problem then your iPod needs service.

  • TS1425 my ipod won't turn off. I can still play/pause, but cannot turn it off

    My ipod will not turn off. It still responds to the play/pause, but will not turn off

    There is no way to actually turn the iPod off. Holding the Play/Pause button actually just puts the iPod to sleep.  And after so many hours from that point, it goes into a deeper sleep thus conserving battery life.
    B-rock

  • Satellite M60/M55: Turns off after disconnecting power

    Reposting because the original threads are locked.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15285&messageID=55746
    My M60 sometimes turns off immediately after unplugging mains power (either the AC mains or DC plug from the laptop), instead of resuming on battery power, although the battery is full.
    The battery is OK & the laptop starts up regularly on battery power after pushing the on switch.
    The Toshiba Power Saver seems to work OK & I have the latest BIOS.
    I always save my work before disconnecting, but I still don't like this behavior & would appreciate some good advice.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19092
    Satellite M55 turns off when disconnecting power cable when disconnecting my laptop from the outlet rather than switching to the battery, my laptop will often simply turn off even though the battery is completely charged. Other times things work as they should.
    I had the motherboard replaced for another reason and was fairly surprised to notice the problem after replacement (but without OS reinstall).
    The main suspect is the TPS and its driver; some months ago a new version was released on Toshiba support site for M60 (though the file dates are not fresh, and I believe I have installed this version earlier).
    So, I removed both TPS and TPS driver. I tested many times and it did not happen again. Not even when I reinstalled them.
    While testing I turned off HD write caching to avoid file corruption problems (but this slows down HD operation, most notably hibernation).
    I'm not sure if this actually works because also earlier the computer would shut down just occasionally, not every time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the outcome is.

    What to say dude. The problem is that this issue happens ONLY sometimes and therefore its not easy to locate the real reason for such shutdowns.
    However, I would try to provide some useful hints but first of all it would be useful to know how old your battery is.
    Fact is that old and stressed batteries lose the own performance very quickly.
    My battery is about 3 years old and my notebook would run on the battery for about 10-20 seconds even though its fully charged. The performance is simple very weak!
    At the other hand the issue could be related to the faulty power supply electronic on the board
    As you see its not easy to say whats exactly wrong and as already suggested in the other threads (locked) you should ask a technician for a notebook check.
    The guys could run some diagnostic tests and could locate fault.
    Best regards

  • IPod won't turn on after changed

    I ejected my iPod on My Computer after changed but it won't turn on. It's not even detected in iTunes or My Computer. I can barely see the Connected... Eject before disconnecting... All the tips don't help, I can't do anything with it...

    You could have a bad battery.
    Patrick

Maybe you are looking for

  • Problems with gradient feather when saving as pdf

    I have an InDesign CS4 file which has a high-quality grayscale jpg with a CMYK jpg on top of it. The later has a gradient feather effect applied to it. When I export to pdf, some people (I believe with an older version of Reader or Preview) cannot vi

  • Problem in Hide Items Not Responsible

    Hi, I'm creating SC with two line items for two different approvers. The 1st approver is responsible for approving only the first line item but he can able to see both the line items and can able to change both the line items. The same is happening t

  • Air 2.7 and MacOs Lion: iPhone packager does not work

    hi. After upgrading from Snow Leopard to Lion the iPhone packager does not work. It throws an error concerning the Application Version Number. Is this a Know bug? Is there a work- around?  Thanks.  Michael.

  • How to manage podcasts within iTunes?

    Is iTunes just really deficient in managing podcasts? I just started using iTunes since I just bought an iPod, and I am subscribed to 10 or so podcasts. Some podcasts I like to keep all episodes, some I only want to keep the most recent. But it seems

  • SQL Azure with Azure Virtual Machine inside Virtual Network - How to connect

    Hi Team, I have one typical scenario where there is one Windows Application I wan to run from my Windows Azure Virtual Machine which is inside Azure Virtual Network (which has its DNS and ADFS and etc..) Because its Virtual Network, We can't access i