Help ipod wont work

Ok, heres the low down...
I got an iPod fifth gen. for christmas, it is my first one since somebody stole my old one, and theres a problem. I was just getting ready to go to school and I took the iPod off the dock without ejecting it from itunes.
When I go to school I noticed that all of the songs have the same album artwork on it. I reset my iPod and it did noting.
I am now home and I tried updating it and when I tried to restore it, the updater said there was an error, so I tried more times. Then I opened itunes again, and it showed under the f: drive folders a text document. I opened it and it sayed it will do a disk check. And it did but it just gave the approximate KB left, used up etc.
And when I checked the videos I had, none were showing up!!
Please help me! what should I do?
Thank you

What is the error when restoring?
Are you following these instructions...
Restoring Your iPod
btabz

Similar Messages

  • I had to change my hard drive, now i'v tried to reinstall itunes, it is saying i have to restore my ipod touch to factory settings, will i loose all my films by doing this, as now my ipod wont work anyway unless i restore ?

    I had to change my hard drive, now i'v tried to reinstall itunes it says i have to restore my iopd touch to factory settings and will loose my files. I have a few films on there and they show up on my purchases.If i restore, will i be able to get my films back ? as at the moment my ipod wont work now untill i restore anyway.

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
    Here's how to:
    Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • Please help me my ipod wont work! D:

    I need serious help D:! ok so i have succesfully synced music onto my ipod b4 but i wanted more songs so i was syncing music onto my ipod touch once again and once the sync was almost finished it said something about an error and then when i unplugged my ipod all of my songs that i had 1st put on my ipod were gone D:! after that my ipod stopped showing up on itunes on one of my computers so i switched to the other and it started doing the same thing. i came on here and was told it might be because itunes wasnt up to date so i updated itunes and my ipod but after the update, during the time when it was backing up software i think, another error popped up and said something about how the session had timed out, my internet connection is fine to so it wasnt that. after that another error popped up saying i needed to restore my ipod back to its factory settings and i said ok but another error always pops up saying the sesion timed out of something! now my ipod is like it was when i first got it! the screen shows the end of a usb cord pointed at the itunes sign! ive tried turning it off but it wont work! and when i try to hook it up to itunes on either off my computers it doesnt show up in itunes and a message from windows pops up and says "Found new hardware: Windows needs to install driver software for your apple mobile device (Recovery mode)" please help me i cant even do anything at all with my ipod right now! D:

    The Internet provider might have too many people using the Internet than what the particular servers are setup for. Or your computer just needs to reset. Try restarting your computer. Also do a hard reset on the iPod. Hold the power button and wake button down until you see the apple logo come on. Let go. Then let the ipod finish bopting up . Then restore your iPod as a new iPod, NOT from the backup.

  • My ipod wont work with my ihome anymore plz help

    my ipod sounds fine with the headphones and with other speakers, but as soon as i put it on my ihome it wont work, yet it still will charge on there it just wont play music. plz help!

    do you have the conncetion right..because i have a ipod and iwake so the speakers might of gone bad..i am not sure but try plugging a cd player or something in the back of the ihome

  • My Ipod Wont Work Somebody Help Please!!

    im sry if this is in the wrong catagory
    well anyways im going on vacation today and i tried updating my ipod cause a while back my sister messed up my computer so i had to restore it so i restore it and i try connecting my ipod it works but when i try to sync the music it says syncing but when i check my ipod the dont dissconect thing doesnt come out and when its done my old songs are still thier and this thing comes out that says i need to sync my ipod to my new itunes so i press it and nothing happens then when i try restoring my ipod it says error 1418 and im really mad can somebody please help me!!!!!

    rishiv93 wrote:
    i tried all the options...
    Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

  • The first row of numbers on my ipod wont work...what maybe the problem?? Help!

    the numbers 1,2,&3 wont work on my ipod...im lost!

    Try the standard fixes to rule out a sftware problem:
    - Reset. Nothng is lost
    - Restore from backup
    - Restore to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I need your help... please???? ipod wont work...

    okay, my ipod was working fine but when i was charging it, it turned on but it just staysed the screen with a apple logo like forever. At first, of course i was trying to restore it cuase my screen says that you have to connect ipod to itunes and i did and at first it got connected and i clicked restore, itunes said that you cant do it cause there is a problem number "3191?" i think.... and i searched it up what 3191 is and the apple said that you have to upgrade my version. so i opened the itunes and all of sudden, my computer and my itunes doesnt connect. my computer cant read my ipod... so   ..... what do i do???? help..?? please???>>>..
    and i want to know how much it cost to repair a situation like this.... ??

    As per your question it appears that your requirement is
    1. Define a earning which is dependent on Grade of the employee .
    2. Define a deduction which is percentage of total earning .
    3. Define an IR which is an earning ( I assume , though its not clear from your requirement ) .
    Step 1.
    You can Write a fast formula which returns the value to be paid based on the assignments current Grade ( Use formula function for returning the required value ).
    Step 2 .
    Attach the Fast formula created in step 1 with ann_sal and make a return the result as Direct Result in the "Pay Value" of ann_sal
    Step 3.
    As per Oracle priority of earnings should be greater than that of deduction deduction hence we need to process "IR" before the deduction so that taxes are calculated correctly.
    But make sure that the priority of IR is lesser than the priority of other earning element so that it can be calculated once all the earning elements are calculated.
    Step 4
    Write a fast formula in which you calculate Assur as per your business requirement
    Now do calculations for IR as per your algorithm .
    Return the calculated value .
    Step 5 .
    Attach formula created in step 4 to IR and make a return the result as Direct Result in the "Pay Value" of IR
    Step 6.
    Now write one more fast formula to calculate assur .
    Use "_ASG_RUN" as the balance dimension in the fast formula to get dbi values. You can refer any seeded formula .
    Now associate the formula with the deduction.
    Hope it helps.

  • Elan Sayso/Tempo Multimedia TTS? - Ipod wont work with itunes

    What does this mean?
    I can put my itunes on fine and I can plug in my ipod nano 16gb...but seperately only. If I have itunes on and plug in my ipod then 'Elan Sayso/Tempo Multimedia TTS Server has stopped working' and I have to shut down itunes as it has froze.
    Ive tried what apple have suggested so itunes has been uninstalled etc and my 3rd generation ipod nano works fine but it just wont work for my 5th generation.
    Please help - also I am not that clever with computers so you may have to dumb it down! Many thanks

    Where would I find any updates?
    No idea since I don't have whatever software you are using but I'd probably start here -> http://www.acapela-group.com/

  • So I tried to downloaded IOS6 and now my ipod wont work.

    Ive tried everything, I tried resetting, restoring, but it wont work! When I tired to restore it said "unknown error occured (3194)". I really need help, I use my ipod for school and really need it fixed, I live over 1hr away from the apple store so its not an option to take it back.
    Thank you so much!

    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694
    You may also try Recovery Mode: (hopefully you have a backup as this will remove data)
    http://support.apple.com/kb/HT1808

  • IPod wont work above 10000 ft

    I was watching the news today and heard a story about iPods not functioning at altitudes over 10000 feet. Being someone who lives in the mountians in colorado where I live and spend most of my time over 10000 ft feel that the warning should have been more readily available. What should I do if my ipod breaks and wont work? Will Apple cover the repairs? Does Microsoft work better at high altitudes?
    Please Help

    While it is true that some Ipods will work well over 10,000 feet, Apple has set that up as one of their specs. There are several reasons that they might have done so. All the components that Apple uses to make up their ipod have operating limits. These may or may not be set up by Apple. For an example and just an example. The maker of the hard drive might have an operational spec of 10,000 feet (not sure what the real range is) and might have only tested to this altitude. They will then post that spec in their docs. Apple then has to decide if they will use that hd. It they do, in order to stay in their contract and warranty range of the hds' they will post that spec. In my experience as an electronic engineer is that in the electronic industry 10,000 ft is pretty much a generic altitude that manufactures give to products that are non aerospace specific.
    So bottom line is that it might very well work to twice that altitude, but it has only been tested to and certified to 10,000 feet. I do know that millions and millions of Ipods are used on small planes all the time and that there are people that live in Co. USA that work and travel in altitudes much higer then 10,000 feet and they work well. I have seen a post from a guy in Co. that has a picture of a G.P.S. and I believe the altitude is in the mid 13,000 ft range and he states it works fine. Remember these are operating specs for optimum performance. Real ranges could be much different. I do know for an example that there is lcd display on the space shuttle that is rated to 400 miles above the earth (how they got that sheesh) but the same display is on a pda that you can buy in just about any store. The screen on that pda (the exact screen) has a service cieling of 10,000 feet. Cost of testing and certification. The manufacture only tested a handful of the screens to extreme altitudes because of the cost. Cost of the screen for the shuttle, 1500 dollars. Cost of entire pda 250dollars. Hope this helps.

  • Upgraded to iTunes 7.0.2 and i ipod wont work

    I have just upgraded iTunes and my video ipod will work fine but my brothers ipod mini will not play music. Although it is being reckonised you can only access the overview but no libery.
    Please help !!!

    When i click music my ipod libery comes up but when i plug the ipod mini in there is no option at all just the summery
    okay, lets plug the mini in again. is there a wee triangle showing up next to the mini icon in the source list? if so, click on that. when it is pointing downwards, do you see "Music" and a list of playlists on the ipod beneath the mini's icon?

  • How to change video card on my laptop satelite L300D, please help, games wont work

    and it only rates 3.0 index score ... really not applicable for gaming ... my need for speed games wont work... any can help me what would i do, so that my games would work ? ... any guides? ..please reply my post! ..

    There aren't any laptops that I know of that can add another graphics card. There are a very few higher end laptops that have removable graphics cards, but for the most part on Toshiba's you can only replace it with the exact same type even if it is removable.  I think you are wasting your time and money trying to upgrade the graphics on that model. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Argh! im so annoyed! ipod wont work!

    ok, so this is whats happening when i try use my ipod, i get this picture
    [img]http://a248.e.akamai.net/7/248/51/3039151158784363/www.info.apple.com/images/kba se/303915/303915_2.jpg[/img]
    so i do what im told and restore it!
    so while im restoring, everything on my gen1 ipod is working fine..
    RIGHT AFTER restoring, i try use the nano again and this is what i get
    [img]http://a248.e.akamai.net/7/248/51/3039151158784363/www.info.apple.com/images/kba se/303915/303915_2.jpg[/img]
    yes.. exact same picture..
    this is what i get on itunes before i restore the nano..
    http://img329.imageshack.us/img329/1593/111cq4.jpg
    someone please help! i think im going to throw my nano into the wall !!! ><
    <br>
      Windows XP Pro  

    Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
    Choose something lower down the alphabet, say 'M' or something similar.
    The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

  • Updated windowsn, now Ipod wont work

    I recently upgraded from Windows ME to Widows XP. I did this in order to be able to update my Ipod. My Ipod is relatively old, and ran under the MusicMatch Jukebox before. Now with an upgraded music match, and a new download of itunes with windows XP, my Ipod wont sync-up. It doesnt start in Itunes or musicmatch, and it keeps all music as music match. Also, I can't add new music. Any suggestions?

    Get rid of Musicmatch. iTunes does not work well if it is used along with Musicmatch.

  • IPod wont work with iMac but works in Vista

    I have an 80GB iPod Classic that works perfect on my computer running Windows Vista and iTunes 7. I have only ever used it with iTunes.
    My iPod's format is FAT32 (Windows). And it's running software Version 1.1.2 and disk use is enabled.
    When i try and plug it into an iMac (iMac G5) running OS X 10.3.9 it doesn't work. It doesn't come up as an external drive so I can't access it as an external disk and it fails to work in iTunes.
    I have upgraded the Mac to the latest version of iTunes but this still doesn't solve the problem. I tunes gives me the following error "iTunes has detected an iPod that appears to be corrupted...". This is not the case, my iPod is not corrupted.
    How can i get my iPod to work on the Mac?

    If you buy an iPod, you are Apple's customer whether you use Windows or Mac OS X. Therefore, your statement
    nice how they screw their own customers.
    makes zero sense.
    If Apple products work in Windows for an extended period of time, this is because the most common and popular (by far) version of Windows is getting on 8 years old. And since XP is so prevalent, Apple has to support it, just like any other company that makes products that work with Windows. It is highly unlikely that Windows Vista will ever surpass XP in usage; Apple will no doubt continue to support XP with iTunes and iPods when XP is TEN years old.
    For Mac OS X, Apple has been pushing the rate of development much faster. Therefore, Panther is already "old" technology, even if it was released after Windows XP. Panther is PowerPC-only and most active Macs (in the installed base) are now Intel-based, with 3 million new Intel Macs being added to the installed base every quarter. ALL Intel Macs use Tiger or Leopard. Most Power PC Mac users with supported hardware have at least upgraded to Tiger, if not Leopard. Therefore, only a small fraction of Mac users still use Panther day to day. SO... Tiger is obviously a good cutoff point for backward support, just as Windows XP is a good cutoff point on the Windows side. It's just common sense, not Apple trying to "screw customers."
    It's not just Apple using this common sense. Many, if not most, third party software and hardware Mac products being released right now require Tiger or Leopard, just like with Apple.
    As for your actual problem, I would try Restoring the iPod on the Windows side (assuming you have a copy of all the files on the PC). A Mac should be able to read FAT32 format, both in iTunes (using manual management) and as a hard drive using Finder. If you can get this to work, you can copy the iTunes media files onto the iPod as files (not through iTunes) and then transfer them to the Mac as files. Then load them into the Mac's iTunes library.
    Continue using your Windows PC to sync the iPod. On the Mac side, use +manual management+ (do not sync).

Maybe you are looking for

  • Sending a message to multiple recipients

    I want to send the same e mail to everyone in my contacts list, Is there any way of selecting all my contacts or do i have to check the box next to everyones name in order to achieve this? Regards Peter

  • Validating only digits

    Hi All I want to validate a field with digits only ( 0 to 9) . If it contains other than 0 to 9 digits like special characters then it should fail.   for e.g. : 384746 should be true              384-746  should be false.   If I use CA operand then i

  • Bridge PDF Presentaion

    Anyone know how I can get back my PhotoShop PDF Presentation in Bridge CS4? Bridge CS3 let me make a PDF presentation via PhotoShop that was way better than CS4. The new interface to generate PDF's sucks as it really doesn't compress the files like t

  • Break Formatting Explaination

    Hello, APEX v3.0.1.008 Can anyone please direct me to documentation or have an explaination on the Break Formatting options in the Report Attributes section? The online text does not contain enough detail or examples for me to understand. The data th

  • Canon MP180 scanner won't be recognized after Mavericks upgrade

    Dear Apple Support Communities members, My Canon MP180 scanner won't be recognized after Mac OS X 10.9 (Mavericks) upgrade: neither in Image Capture nor in MP180 standalone app. The printer works well though. Any idea? Thanks a lot. Best wishes, Yves