Help. Is the Airport Extreme Card compatible with my iMac?

Probably stupidly simple, but I'm not sure of the answer. I've tried to get the answer online, but no luck. Can someone tell me if the airport extreme card will work with my iMac?
TIA,
Ben
Hardware Overview:
Machine Model: iMac G5
CPU Type: PowerPC G5 (3.0)
CPU Speed: 1.8 GHz

Yes the AirPort Extreme card is the correct card for your iMac.

Similar Messages

Is the airport extreme card incompatible with my powermac G5 dual 2 GHz?

I have installed an airport extreme card into my powermac G5 dual 2 GHz. It will only detect my router if it's in the same room and even then it has a very weak signal. Any suggestions?

You need both for it to work, but don't you have the card already?
http://www.ebay.co.uk/sch/i.html?_kw=Apple&_kw=Airport&_kw=Antenna&_kw=mac&_kw=g 5

Is the powermac g4 (model number m8359) compatible with the airport extreme card

It was released in 2001 and I wasn't sure if I could successfully install the airport extreme card into the computer.

Nope, sorry...
Standard AirPort:
802.11b (Optional)
http://www.everymac.com/systems/apple/powermac_g4/specs/powermac_g4_733_qs.html

I have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purch

i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?

the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled.......

Which slot for the airport extreme card?

I just picked up an airport extreme card for my mac pro. I located the slot in the mac pro, but there are two on top of each other.
Question: which slot do I have to use: the upper or lower one?
Iemke

Thanks for the answer, however inserting the card was
not the difficult thing. Finding the correct wire for
the antenna was the difficult thing. A apple
certified technician helped me with that issue.
Iemke
I want to buy the mac Pro and install the airport extreme card - what is the model number of the new card (apple tech tell me it is different from the old G4 card of the same name) and which is the correct wire to attach it to?
BTW I know my way around the G4 desktop having upgraded &/or replaced everything screwed down in those
this knowledge will speed up the purchase process-thanks
G4 powerbook 17" Mac OS X (10.4.8)

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

Can I use the AirPort Extreme to print with my iPhone on a non AirPrint compatible printer

Can I used this as my new network router and make my printer work with my iPad and iPhone

In order to print from an iPhone or iPad, your printer needs to be AirPrint compatible. Check to see if your printer is compatible using this Apple support document:
http://support.apple.com/kb/HT4356
Simply connecting the printer to the AirPort Extreme will not make it AirPrint compatible.

Please Help: I cannot get the Airport Extreme settings right with AT&T DSL

AT&T Motorola 2210 DSL Modem.
I have tried both bridged on/off and different configurations on the Airport Extreme, but I cannot get online. I am out of ideas. I called AT&T tech support and because it's not one of their wireless routers, they wanted to charge me to troubleshoot, ridiculous.
Please help

If you find that the Double NAT setting will not allow the PS3 to connect correctly, your only other option is to change the configuration of the modem to either +PPP on the computer+ or +Bridge Mode+ and then configure the PPPoe service on the AirPort Extreme.
I assume that you have already set the modem up using the default IP address of 192.1681.254 (I think this is it). You'll need to locate the page to change the settings and it will probably have a red warning sign on it. Either PPP on the computer or Bridge Mode will work. Update to save settings.
Then under the Internet icon in AirPort Utility:
Connect Using = PPPoE
enter your user name (probably your email address with the service provider)
enter your password
Leave the Service Name area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings.
That will eliminate the Double NAT issue and the PS3 should get a clear indication. As I said, when you have the PPP connection on a device other than the modem, you may see an occasional drop and restart of your connection. That seems to be a fact of life with this type of setup.

Airport extreme not compatible with xbox live?

Hello,
Ive had this problem for a long while now and are getting desperate. Basically when i go on xbox live the connection is really really bad. It's not all the time, rarely it will work fine but most of the time the connection is awful.
I know the problem isn't because of the location of the xbox since, the connection is strong in my laptop in that room and we have also used a wifi signal analyzer in the room aswell. It's not because of where i live since i have a friend across the road who's xbox connection works fine. We also have an xbox dowstairs much closer to the router which also has the same problem. Im almost convinced its because of the aiport extreme.
We have an aiport extreme which acts as the router and a netgear which is the modem. The airport extreme has to be in bridge mode or else i get a double nat problem. I think its something to do with the airport extreme and netgear conflicting, if they where i have no idea how to solve it or even if thats the case.
We tried taking the airport extreme out of bridge mode and then turning nat off on the netgear but then we couldn't connect to the internet at all.
Please help me, i really need this problem solved. Its really starting to annoy me.
Thankyou

Im almost convinced its because of the aiport extreme.
Unfortunately, the key issue here may be that the AirPort Extreme is not on the Xbox list of "compatible" routers.
Xbox LIVE Compatible Hardware - Xbox.com
I know of no way to change that fact.
We have an aiport extreme which acts as the router and a netgear which is the modem.
You do not have a Netgear modem, you have a Netgear modem/router or gateway. That is why the AirPort must be in Bridge Mode. In Bridge Mode, the AirPort is not acting as a router, it simply passes through the network information from the Netgear gateway.
If you want the AirPort to act as the main router for the network, then the Netgear device must act as a pure, Bridge Mode modem. Netgear support may be able to tell you if it is possible to configure the device that way.
But, even if it is possible to configure the Netgear this way and the AirPort as the main router, the fact still remains that the AirPort is not listed as being "compatible" with Xbox, so there are no guarantees that this will help.

What is the difference between the Airport Extreme Cards A-1026 & A1027?

I need to get an Airport Extreme Card for my for my G4, 1.25, 800 FW, MDD.
I am unfortunatly very much on a budget. I am therefore, shopping eBay. I am seeing two different model Airport Extreme Cards which are apparently specified for my Mac. They are the A 1026 and the A 1027.
What is the difference between the two cards.
If it helps, the exact specs for my ubnit are here
http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4_1.25_dp_mddfw800.html
M8840LL/A G4 1.25 800 FW MDD Mac OS X (10.4)

Hi-
Welcome to Discussions!
Airport Extreme A1026 (standard card)
For Mac mini, All Aluminum PowerBook G4s, All iBook G4 laptops, All PowerMac G5s, Power Mac G4 (FW 800), (Mirrored Drive Door 2003), (Mirrored Drive Doors), eMac (2005), (ATI Graphics), (USB 2.0), iMac (17-inch Flat Panel, 1GHz), (USB 2.0), iMac G5 (17-inch), (20-inch)
Apple Service Part #: 661-2755, 825-6235-A, 603-3575The AirPort Extreme Card can be installed only in computers that are AirPort Extreme ready.
Airport Extreme A1027 appears to be a card more specifically(?) for the EU, Australia, New Zealand, non- US markets. The only documentation I could find of it, is at Apple UK, for a letter of compliance to EU standards.
Won't go wrong with the A1026, but can't confirm compatibility (or not) with the A1027.......
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

How do I remove the orange ribbon connector from the airport extreme card.

It's the last thing keeping me from intalling the new card. Does anyone know how to remove it. And why does the new one have a plastic tab sticking out next to the antenna port?

the card inside PB G4 17" is physically different card than the retail card.
retail card has plastic tab to pull it out of the slot of compatible models:
http://docs.info.apple.com/article.html?artnum=107440
card for 17" has a cable built in:
http://www.powerbooktech.com/part,name-Airport-Extreme-Card-for-PowerBook-G4-17, powerbook-aluminum-17.htm

Is the AirPort Extreme Poe compatible?

Is the AirPort Extreme power over Ethernet compatible or does it have to have a separate power supply?

The Extreme is not PoE compatible.

Will airport extreme card work with my emac?

I want to put an airport extreme card in my Emac. Please let me know if it will work in my machine. My Emac specs:
Power PC G4
CPU Speed: 800MHz
L2 Cache: 256 KB
Memory: 1Gb
Bus Speed: 100MHz
Purchase year: 2002 (before USB2)

According to:
http://docs.info.apple.com/article.html?artnum=107440
Only the eMac ATI Graphics model and USB 2 models could take Airport Extreme.
According to:
http://www.designedinca.com/macs/emac/may2003/800cd/
the ATI Graphics model replaced the August 2002 to May 2003 which was also 800 Mhz.
Thus your machine was the one before the Airport Extreme became available:
http://www.designedinca.com/macs/emac/aug2002/800/
So no, you can't put an Airport Extreme card in it. You can though get Airport Extreme speeds via a LAN capable WiFi access point via its 10/100 ethernet port.
You can also buy the original Airport card from:
http://www.a1acomputing.com/usorapaicam7.html
Message was edited by: a brody

I use my ps3 online gaming, is the airport extreme or the airport express be compatible with ps3? Is it going to be a better connection compair to other router? Which one is a better choice for me, airport express or airport extreme??

I bought linksys EA3500 router. Its still in the box and before I open it I want to learn more about the apple airport router, is the apple going to work with my online games with ps3? I have iPad, 2 iPhones, apple tv and Mac mini. If the airport express or airport extreme is a lot better and will work for ps3 which one should I get?

Airport will work with PS3. From what you've stated, the Extreme is more than you need. Buy the Express.

Help. Is the Airport Extreme Card compatible with my iMac?

Similar Messages

Maybe you are looking for