Help! Is there a way to rebuild the mail archive? all mail scrambled...

All my archive is scrambled... The emails are connected to the incorrect "from", "subject" etc. in the finder. I'll highlight, for example, an email from "susan x." in the mail finder and the email attached to that will be a totally unrelated email from a different person or company or something. It is a complete mess.
Is there any way to fix this?
Message was edited by: David Yoder1

In Mail, select the problematic mailbox and go to the "Mailbox" menu. At the bottom select "Rebuild".

Similar Messages

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Is there any way to rebuild the database in iTunes?

I've moved my iTunes Library to another hard drive for more space and now it has lost track of the location of many of the songs on the new drive. I have set up the location of the drive in Preferences/Advanced, but it has no effect. Is there any way to rebuild the entire iTunes database at the same time so it is not necessary to locate each of the songs individually?

Hello there, MataPunk.
The following Knowledge Base article has great guidelines for recreating an iTunes Library:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D.

Is there a way to stop the mail icon from bouncing

Hi all. Is there a way to stop the mail icon from bouncing on the dock when a new message is received? It's irritating. I'm running Lion. Thanks.
Kelly

Thank you Linc. I knew that I did something in system preferences to cause it to bounce, but couldn't remember what I did. I appreciate your help! Kelly

Is there a way to rebuild the database(s) in ARD without re-installing?

On my intel iMac (10.4.7) my lists will all go offline or "--" all at once... a restart of the app sometimes solves this for a while but eventually, I need to completely delete all of ARD and re-install to restore functionality. Id there a way to rebuild or replace the database(s) aARD uses for this stuff without a complete re-install (which, is not a trivial process)
thanks.
intel iMac Mac OS X (10.4.7)

the app is not crashing with logs. It will become non-responsive frequently while scanning or while refreshing my all computer list. I originally, suspected the not so great DNS and st00pid number of subnets I have to scan to work but I have ARD 3 on my Xserve and the same install has been running issue free for months, on the same network.
I have removed/re-installed ARD a few times on this box (and a dual G5 tower) with the same issue recurring... I just cannot figure out the trigger that makes it all go pear shaped.

Is there a way to change the font of all text in all layers all at the same time in

I'm wondering if there is a way to change the font of all text in all layers all at the same time in Illustrator CS5.

From the menu...... Type > Find Font

Is there a way to rebuild the ITunes Library XML file from my IPod?

After several promptings, I finally decided to install ITunes 7.4.3.1. Like a fool, I did not backup my entire library prior to doing this upgrade. Nothing is going to go wrong now mate, is it? Everything seemed to proceed just fine with the upgrade. I noticed that ITunes updated the XML Library in the process. Where the problems occured was after the upgrade, I was in the middle of listening to the latest "NPR Wait Wait Don't Tell Me" Podcast (I have some 3,000 downloaded podcasts in over 85GB worth of space) when ITunes crashed. When I brought ITunes back up, it had seemed to have reverted to an earlier backup ITunes Library XML file that I had made months ago.
I still have all of the .mp3, .m4a, .mp4 and .m4v files stored in my ITunes Music folder. Somehow when I brought ITunes back up, it had lost all of the music I had dowloaded from the ITunes store even though the files were still out on disk. It thought there were only 395 podcasts despite the 3,000 plus files out there.
Clearly, something went horribly wrong and I don't want to spend weeks downloading these files again when the only thing that really needs to be done is the ITunes Library XML data file needs to be rebuilt. It dawns on me that my IPod has an XML data file that save any updates I have not yet synced with it that it is quite current. Is there some way that I can sync my IPod with ITunes and copy the IPod XML data file into ITunes Library XML data file? I know that there must be some way to access the IPod since I can plug it into my Kenwood car stereo and read through the IPod's contents.
Is there anyone out there that has an idea that might be able to help me recover my ITunes library?
Thanks for any assistance,
--randyt00

The XML file is not used by iTunes. It is created for the use of other programs. Your library is in the itl file. SInce you still have the file you could simply add them to your library using the add folder option instead of downloading again.
What are library files
http://docs.info.apple.com/article.html?artnum=93732
Rebuild library.
http://docs.info.apple.com/article.html?artnum=93313

Is there a way to clear the history of all the reports

I would like to clear out the history of all the reports listed in InfoView because many of the links are broke because I was told to delete all the directories containing the pdf's in the Epic\EpicBI\Output folder. Can I truncate the tables in the database or where does InfoView maintain those links?

If you want to delete all the scheduled instances for reports, it can use the code similar to the following:
IInfoObjects oInfoObjects = oInfoStore.query("select si_id from ci_infoobjects where si_instance=1 and si_name='<report name>'");
for(int i=0; i<oInfoObjects.size(); i++)
IInfoObject oInfoObject = (IInfoObject)oInfoObjects.get(i);
oInfoObject.deleteNow();
oInfoStore.commit(oInfObjects);
as a side note, do not try to alter the output file repository or the CMS database directly, it could create lot of issues\inconsistencies in your system and make it unusable.
Thanks
Aasavari

Is there a way to adjust the volume on all clips so they all have the same volume?

I'm making a highlight film of my two children, and wonder if there is a way to make all clips have the same volume. I know I can adjust the individual clips decibel niveau, but ven though I adjust them to the same level i.e -6 decibel, the clips volume are not the same. Any suggestion, or do I have to adjust each clip with different decibels niveaus and try to make the volume the same, like one clip can have -6 decibel, one light have 3 decibel and so on in order for the volume to be Aamodt the same.

On the Time Line you can copy the clip (Command-c) that has the levels you want. Select the other clips and hit Shift+Command-V to paste effects. Check the Audio attributes.
Russ

Is there a way to change the font of all of my headers at the same time? Or all of my body text?

I'm doing a save-as to a document and having to go through and change the fonts for every body paragraph and header. Wondering if there is an easier way to do this than manually.

You can maybe use the Find/Change
Command+i
See if that can work for you.
But like Steve said it is good practice to use Paragraph Style whenever you have lots of Type, I just get lazy sometimes.. lol
Thanks

Is there a way to delete the mail program or cancel so it doesn't open automatically

The Apple mail program pops up in the dock and opens automatically. As I use other mail programs this pop up is annoying and there must be a way to eliminate or cancel soot doesnot continually pop up?
I've tried to hide it but it comes back after awhile. It also is open in background as it always seems to stop shutdowns and restarts.

You may have Mail.app as one of your log-in items - check Users & Groups and your user name to see if it is a log-in item.
The only other reason that the app would automatically launch is that you have it open when you restart or shutdown and have 'reopen windows..." ticked when you shutdown or restart.
Clinton

Is there a way to reset the parameters of all the system's native users and groups to their default settings?

After the upgrade to 10.8.3 my console is streaming perpetually with hundreds of lines of what appears to be permissions denials.
I've rebuilt permissions from my admin user, root, safeboot, an external virgin os install, and the recovery partition
run disk utility multiple times
safebooted multiple times
rebuilt the directory structure via the latest build of Diskwarrior
removed all peripherals
reset PRAM
reset SMC
ran the Extended Hardware Test
all drivers are up-to-date
Used OnyX to hunt for corrupted preference files
Used Onyx to clean every cache in the system
Cleaned up the fonts via Font Book
Rebuilt Launch Services
Rebuilt dyld's shared cache
Disabled Swap
Disabled Time Machine Local Backups
I'm running a 2011 MBP Quad i7 17" 2.3GHz 750gig internal 7200rpm with 16gig of ram 1600x1200 display
OSX 10.8.3 with dev kit

For what it's worth, this is the exact same set of ACL's that get "fixed" every single time i run the permissions repair:
Started verify/repair permissions on disk1s2 Flux
ACL found but not expected on "private/etc/apache2/users"
Repaired "private/etc/apache2/users"
ACL found but not expected on "private/etc/postfix/aliases"
Repaired "private/etc/postfix/aliases"
ACL found but not expected on "private/etc/postfix/main.cf"
Repaired "private/etc/postfix/main.cf"
ACL found but not expected on "private/etc/postfix/master.cf"
Repaired "private/etc/postfix/master.cf"
ACL found but not expected on "private/etc/profile"
Repaired "private/etc/profile"
ACL found but not expected on "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
Repaired "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
Repaired "Library/Preferences/com.apple.alf.plist"
ACL found but not expected on "System/Library/LaunchDaemons/org.postfix.master.plist"
Repaired "System/Library/LaunchDaemons/org.postfix.master.plist"
ACL found but not expected on "Users/Shared"
Repaired "Users/Shared"
ACL found but not expected on "private/etc/named.conf"
Repaired "private/etc/named.conf"
ACL found but not expected on "private/var/root/Library"
Repaired "private/var/root/Library"
ACL found but not expected on "private/var/root/Library/Preferences"
Repaired "private/var/root/Library/Preferences"
ACL found but not expected on "System/Library/Keychains/X509Anchors"
Repaired "System/Library/Keychains/X509Anchors"
ACL found but not expected on "private/etc/hostconfig"
Repaired "private/etc/hostconfig"
ACL found but not expected on "private/etc/shells"
Repaired "private/etc/shells"
ACL found but not expected on "private/etc/ssh_config"
Repaired "private/etc/ssh_config"
ACL found but not expected on "private/etc/sshd_config"
Repaired "private/etc/sshd_config"
ACL found but not expected on "private/var/db/launchd.db/com.apple.launchd"
Repaired "private/var/db/launchd.db/com.apple.launchd"
ACL found but not expected on "private/var/yp/binding"
Repaired "private/var/yp/binding"
Finished verify/repair permissions on disk1s2 Flux

Is there a way to get the list of ALL user exits in ECC 5.0 or 6.0

Is this list published somewhere by SAP or can we get it from the system somehow? I m not talking about Enhancement or BADI's just user exits.
Thanks for reading

Hi ,
Just check this program to get the list
Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Thnks
Abhishek

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
    Apple won't permit PC software that infringes its proprietary apps.
    Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
    School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
    Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
    Classrooms are not able to keep up with the technology of using the iPad
    Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
    Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

Help! Is there a way to rebuild the mail archive? all mail scrambled...

Similar Messages

Maybe you are looking for