Help, Is there anyway to "unsave" slides....Need to recover lost work.

HELP! Is there anyway to "unsave". I accidently hit save on the wrong keynote file I had open and it overwrote all the slides I had done up to that point. A ton of lost work.
Is there anyway to recover those slides. I'm new to Mac.
Thank you!!

As long as the file is still open, you should be able to "undo" past the save point. Once you've saved the file and reopened, though, that information is no longer available in memory.

Similar Messages

  • Help, Is there anyway to "unsave" slides....

    HELP! Is there anyway to "unsave". I accidently hit save on the wrong keynote file I had open and it overwrote all the slides I had done up to that point. A ton of lost work.
    Is there anyway to recover those slides. I'm new to Mac.
    Thank you!!

    If you just saved the document to its default location after making changes that you didn't want, and still have the document open, you could try undoing all the way back to where the document is as you want it.
    But if you saved a document over another document by mistake - then yes, you're out of luck.

  • I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    Please see the subject line thanks
    I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor.  Have the case number for the promised refund available.
    If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device.  Buying storage in iCloud does not add space to the device which is what you need.
    You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
    HTH

  • Is there anyway I can retrieve photos on my lost/stolen iPhone that have NOT  been set up with iCloud?

    Is there anyway I can retrieve photos on my lost/stolen iPhone that have NOT been set up with iCloud?

    Have backed up your iPhone with iTunes to a computer? Then you can restore a replacement iPhone from this backup, and this with also restore the camera roll.  The iTunes backups will contain the camera roll.
      iTunes: About iOS backups

  • Help! Need to recover lost hard drive data after creating a partition!

    So, I'm the world's biggest idiot, and I was trying to reformat my hard drive so that I could bring the documents from my Mac to my PC.
    All of the docs were perfectly organized in folders and subfolders a long time ago, and once that had been done, I deleted everything off of the MacBook itself. I never thought I'd have to move all of the docs to a PC, but alas, nothing ever goes the way we plan now does it?
    Anyways, I created a FAT 32 partition not realizing it would delete everything I already had on the hard drive, so now I need to recover all of that.
    Is there ANY way that I can recover all the data I lost?
    Pls respond.

    When you create a partition, the partition is the erased so all content is lost.  There are data recovery services that may be able to recover the material, but they are very, very expensive, if they can even succeed with this kind of erasure.
    Check and see if there are any hard drive data recovery services in your area.

  • I have photoshop CS2 on a mac 10.6.8 OS. I want to upgrade to Yosemite OS (10.10). Will photoshop work on the new OS? Is there an upgrade available if needed?        toshop keep working? Can I reload it  if needed?

    I have photoshop CS2 on a mac 10.6.8 OS. I want to upgrade to Yosemite OS (10.10). Will photoshop work on the new OS? Is there an upgrade available if needed?    Can I reload it  if needed?

    Photoshop was the last version compiled for the PPC cpu, not Intel. 10.6.8 kept it going with the Rosetta emulator, gone since 10.7.
    So, no CS2 won't work under 10.10
    CS6 (permanent license) or Lightroom and Photoshop | Adobe Creative Cloud Photography plan is the way to go.
    Gene

  • HELP please, need to recover lost photo.

    Recently uploaded a group of pictures from my camera, deleted the originals from my camera after uploading them. When reviewing them I was looking at a really great family photo that I took, only one like it. And of course instead of pressing escape to get out of the full screen mode, I pressed delete and the picture seems to be gone for good. I tried using a recovery program that recovers deleted photos from your cameras memory card. It recovered a lot of deleted photos, but none of them from the batch I recently took and uploaded. Is there anyway I can get it back? It didn't go to my Trash.

    Look in the iPhoto trash (on the left near the top of the source pane under "recent")
    Unless you have emptied the iPhoto trash since you deleted your family photo all of your deleted photos will be there
    LN

  • Help is there anyway to record video ??

    i have a 20" 2.1ghz g5 imac with built in isight and i guess ilife05...i havent bought any other software just what came with my computer...i have tried to record video using my built in isight but i cant find anything that works even in imovie....i dont want to purchase anything, i dont understand why i would have to...any help would be appreciated.

    Hi makeyurself,
    Unfortunately the built in iSight won't normally work with the version of iMovie which came with iLife05. To use it with iMovie you have to update to iLife06.
    There is a workaround, but it assumes that you have access to a FW DV movie camera.:
    1) Fire up iMovie and connect a DV camcorder,
    2)go to import mode in iMovie,
    3) disconnect the camcorder
    Bizzarely you should now be able to shoot using your built in iSight.
    I suspect most people who want to do this, though, don't have ready access to a seperate DV camcorder!
    Have a look at "EZ Jim's" page on Ralph Johns website at http://www.ralphjohnsuk.dsl.pipex.com/EZJim/EZJimpage3.html for some more suggestions.
    Cheers
    Rod

  • Help! I need to recover "lost" aif tracks

    I've looked for topics that might help me with my problem, but I haven't seen anything that matched.
    Here's what happened: I recorded a podcast with three tracks (using a mixer -- I've done this many, many times with no problem), and at the end of the recording (after stopping and saving) I clicked some button that made the spinning beach ball appear (I think I hit the "go to beginning of track" button, but this explains nothing). While waiting I may have accidentally clicked another button. Anyway, the three tracks I had just recorded and saved disappeared. GarageBand would NOT let me undo whatever I had done, and when I went to quit it did NOT ask if I wanted to save changes. I quit and restarted GarageBand, and the tracks were still missing.
    At this point, I assumed all hope was lost. BUT! When I "get info" on the .band file, it shows that the file is a little over 500MB (the recording was about half an hour, so this is the size it should be), and even more interestingly, when I copy the file to another drive, the progress window shows that it is copying three .aif files ("Recording#01.aif" "Recording#02.aif" and "Recording#03.aif" -- one for each track). So I know those tracks are in there somewhere, I just can't access them or get them to appear in GarageBand.
    Does anyone have any ideas to help me get these aif files out of the .band file? I looked all over for some kind of extraction program, but the only one I found (BandToLogic) I could not get to run. Any help, ideas, suggestions, hunches, suspicions welcome! I am desperate to recover this podcast, which is an interview that cannot be redone! Thank you in advance.
    Message was edited by: silentk

    glad to hear it worked for you and you were able to rescue your work, a working solution is always the best news to hear in a thread
    however be cautious with this knowledge ... this was an extreme case, you couldn't have really broken what was already broken. messing with the package contents of a working file puts the integrity of that file at risk, and it's possible to break a file and lose a lot of work

  • Is there anyway to check to see if my processor works?

    I recently built my own pc and for a little while, everything was working except the fan. So, I sent the old fan back and got a new fan. I put the fan on the cpu and when it looked like my pc was about to boot nothing happens. I've tried switching out power supplies but my pc still won't boot. I really think that it's the processor because I also tried removing everything except the cpu, video card, hard drive, and fan. I can't think of anything else to do.
    System Specs
    MSI K8N Neo2 motherboard
    Leadman Powmax 300w power supply
    2x512 MB DDR
    32 GB SATA hard drive
    AMD 64 3500+ 939 pin
    Arctic Cooling's Freezer 64 cpu fan

    Well, your options are:
    1. Pull out processor and put in another working MOBO (make sure that you have extra thermal grease around for this).  If it doesn't start up, then it very well could be you processor.
    2. Check for any burns on your processor.  If there are then RMA it and see if they will replace it for you.
    Those are the only two things that I can think of to look for.  Sorry I can't be more help.
    BTW.  What are the Power specs for your power supply?  Make sure that the 12V rail is over 18A.  24A or more is ideal.  If you PSU is lower than 18A on the +12V rail then you need a new power supply.

  • Help needed to recover lost photos, please!

    Please help!  All 49,537 photos in our iPhoto library have suddenly disappeared.  A hopeful fact is that the 512 gigs they recently filled has not reappeared on Finder as available space. Might someone out there in the ether be able to help?  Please?

    If your profile is correct about the library and system versions apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager 3.8.6 and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Is there anyway AT ALL to get my ipod to work with a Windows ME computer???

    I just bought this ipod. Can I get it to work on Windows ME? Please help!!

    Well you can certainly try, but it will probably involve you buying some 3rd party software.
    http://www.redchairsoftware.com/anapod/support/regassist.php?c=9899
    http://www.mediafour.com/products/xplay/

  • HELP! old M505 has crashed and need to recover the data on it

    Hey all,
    I'm hoping someone out there has some creative idea on how I can recover the data that was lost on my old M505.  I went on a long vacation and when I returned it had completely run out of power.  Unfortunately after recharging it, the system started at the initial installation screens and had lost all of my addresses, which I had not backed up in a very long time.
    If anyone has any great ideas, it would be very much appreciated.
    Sincerely,
    Bob Last
    Post relates to: Palm m505

    Hi, and welcome to the Palm Support Community.
    Sorry, but there is no good news here.
    Your old m505 has what is called "volatile" memory, which means that it requires power to maintain it.  Once the batteries die, there is a small capacitor which holds just enough power to preserve data for another few days.  After that, it's << poof ! >> gone and there is no way to retrieve it if you don't have it backed up to your computer.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Hey is there anyway to delete iPhone memory when its lost and turned off?

    hey i just wanted to know if there is a way to delete or wipe everything off an iphone when its turned off and lost. including apps and msgs. basically back to factory settings. response asap will be appreciated please very urgent.

    "so there is nothing that can be done?"
    Correct.
    " like maybe calling up apple or something"
    Like any maker of any other phone, Apple can do nothing.
    Sorry.

  • Need to recover lost Windows license associated with HP laptop

    I have a HP G71-340US. I installed a separate copy of Windows 7 onto the laptop. I wish to find my Windows Product ID number (Serial Number) from my set of install disks which I've lost. Is there some way to send my laptop serial number in (CNF94607F9) and obtain the Windows Product ID number so I can use the license I own by virtue of my purchase of that laptop?
    Thank you,
    Greg Alexander

    GisG wrote:
    I have a HP G71-340US. I installed a separate copy of Windows 7 onto the laptop. I wish to find my Windows Product ID number (Serial Number) from my set of install disks which I've lost. Is there some way to send my laptop serial number in (CNF94607F9) and obtain the Windows Product ID number so I can use the license I own by virtue of my purchase of that laptop?
    Thank you,
    Greg Alexander
    If you wiped clean the original O/S then your only chance is the Product Key sticker on the bottom side of the laptop to activiate your Windows otherwise you will have to order the REcovery media to restore your system back to factory setup.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Maybe you are looking for