Help - issue with update 10.2.0.429

I updated my Z10 to10.2.0.429, now I have to keep taking my battery out to send or read text messages and twitter no longer updates. Also my battery runs down really quickly. My Z10 is less than a year old. (about 8 months). Now when I connect to BB link, it says there is a problem accessing my drives on the device so it can't synch or perform a back up. It also says that my devise and s/w is up to date. HELP!

I've found that sometimes reloading the OS you just loaded does the trick. The OS has been tested by BlackBerry and is fit for release so that isn't the issue.
Plug your phone in to your PC and open BlackBerry Link. Once your phone has connected, click your phone on the left panel then click Backup and Restore. Start by doing a backup of it. Once that has completed, click Backup and Restore again but this time click Restore. Choose the backup file you just created and load it.
Why reloading the same OS works, I don't know. I just know that it's helped me on more than one occasion so I often recommend to other users to do it.
Keep us posted on your progress.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Having issue with update Adobe 11.0.06. Error 1603.

Having issue with update Adobe 11.0.06. Error 1603.

You should have gotten this information with the error: "Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates. See also Error 1603 | Install | CS3, CS4 products." Also, be sure you log in as the administrator and disable anti-virus.

Issue with Update of Table VARINUM

Hi,
I am getting waiting Issues with Update of table VARINUM. Has anybody faced such an issue.
I have a lot of Jobs which are running in background. I am submitting it through a report. what can be the issue.
Regards,
Abhishek jolly

Thisi is quite old, but not answered properly yet, so there you go:
SAP generates a new job and temporary variant on report RSDBSPJS, for each HTTP call,which creates database locks on table VARINUM .
This causes any heavyweight BSP application to hang and give timeout errors.
The problem is fixed applying OSS note 1791958, which is not included in any service pack.

Any other realtors having issues with updating their Suprakey on their Android?

Any other realtors having issues with updating their Suprakey on their Android?

The follow is from clicking on that error number in the article cited at the end of my post:
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
iOS: Resolving update and restore alert messages

Having issues with update to iOS 8

Having issues with update to iOS 8, wheel keeps spinning with 9 hrs remaining to complete update. What are my options?
<Re-Titled By Host>

I am a windows/mac user... And I was Linux user for several years... And so far I have been really happy with apple but this problem is frustrating.
I don't understand:
1)Why can't I go back to iOS7 since this was apparently the most stable version for my iPad ?
2) Why is apple not doing anything about it, ?
3) If the problem is that my iPad's can't fully support the features of iOS8, why on earth have they made it available to iPad 2?
Any way, I will just wait a bit longer and probably start looking in to a Samsung tablet or something....
Cheers,

Issues with updating!! Help!!

I got the App 200 Error and am trying to update the OS, but my desktop manager keeps saying that I have connection issues with the internet and won't let me update. Is there something I can do??

Are you doing a web-based upgrade or are you going through the BlackBerry Desktop Software?
If you have tried both of those options, and are still having issues have a look at the link below. This link will explain how to perform a clean application load of the BlackBerry device Software.
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
http://www.blackberry.com/btsc/KB11320
Hope this helps.

Issue with updating Security Info on my Microsoft ID

I am stuck in a vicious circle trying to sort an issue with my Microsoft account.
I need to remove an old, defunct, email address and add a load of new security info however, depending on whether the date format on the page I keep being directed to is UK or US, either the updates haven’t happened or they won’t
be happening until next month – which seems ridiculous!
I’m trying to sign up for a Windows Store developer account to publish a Windows 8 app. I’m using my MSDN subscription to register for this (for free) but there is a step I can’t get past because it insists on sending a code to
my old email address – to which I have no access. It is picking up this address from my Microsoft Account Security info – however, I updated this info weeks ago. This is the screen I see (I’ve blurred out some of it as it seemed foolish to publish all my security
info J
It says my old address will be removed on 03/04/2013 and my new info added on that same date. Does anyone know if this is UK date format 3rd April – in which case it’s a long wait or a US date 4th
March in which case it didn’t happen? I’ve tried phoning 5000 and the Microsoft Customer support lines but neither of them have a clue where to start. They just keep asking me if I’ve forgotten my password – which I haven’t.
Does anyone know how I can resolve this? My only option at the moment is to wait until 3rd of April and see if anything changes – which is not ideal.
Cheers,
Rob

Hello,
The Microsoft account forum has been retired and all account related questions must now be asked online
here.
Select the issue you need help with and fill out the requested details on the next page.
You need to be signed in with a Microsoft account to access the form. If you are unable to access your primary account, you can use an alternate account (if you have one) or create a new one at
https://signup.live.com
You can read further information about blocked accounts
here.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Issue with update of BOM by Variant Config - Cost relevant indicator

Hi All VC Expert,
We are facing an issue with the update by reference characteristic of the field STPO-SANKA Cost relevancy indicator on the BOM.
We are on SAP ECC 6.0 release 700 on Oracle
Hot Package
- SAPKA70015 on ERP Cross Application componenent
- SAPKH60013 on SAP-APPL Logistics and accouting
We are using material variant
We are on the first level of configuration
Classically, we built a procedure to set X to this data base field as below :
$self.STPO_SANKA = 'X'
We assigned this procedure to the relevant items
Here is the result we have:
At the creation of the Plan Order, this is not working
At the creation of the Prod Order, this is not working
When we do a Reload PP master data, this is working very well
On CU50/VA02 when we check the trace, the procedure is executed.
Do somebody have an idea or already facing this and solve it ?
Thanks in advance for your appreciated help.

Hi Fabien. Did you solve your problem?

Performence issue with Update

hi all,
I am facing issue with below update statemetn. taking huge time to update. in xx__TEMP table I have index on Project id column. and all underlying table hase index.
Please look into plan and let me how I can reduce Cost for the blow update statement.
Thanks in advance.
UPDATE dg2.ODS_PROJ_INFO_LOOKUP_TEMP o
SET Months_In_Stage_Cnt =
(SELECT
NVL(ROUND(MONTHS_BETWEEN(SYSDATE,x.project_event_actual_date),2),0) Months_In_Stage_Cnt
FROM od.project_event x
WHERE x.project_id = o.project_id
AND event_category_code = 'G'
AND project_event_seq_nbr =
(SELECT MAX(project_event_seq_nbr)
FROM od.project_event y
WHERE y.project_id = x.project_id
AND y.event_category_code = 'G'
AND y.project_event_actual_date IS NOT NULL
AND stage_nbr <> 0
AND y.project_event_seq_nbr <
(SELECT project_event_seq_nbr
FROM od.project_event z
WHERE stage_nbr =
(SELECT current_stage_nbr
FROM od.project
WHERE project_id = x.project_Id )
AND z.project_id = x.project_Id
AND z.event_category_code = 'G'
AND skip_stage_ind = 'N'
AND project_event_actual_date IS NULL )
Plan
UPDATE STATEMENT CHOOSECost: *1,195,213* Bytes: 71,710,620 Cardinality: 41,213
14 UPDATE DG2.ODS_PROJ_INFO_LOOKUP_TEMP
1 TABLE ACCESS FULL TABLE DG2.ODS_PROJ_INFO_LOOKUP_TEMP Cost: 36 Bytes: 71,710,620 Cardinality: 41,213
13 FILTER
3 TABLE ACCESS BY INDEX ROWID TABLE OD.PROJECT_EVENT Cost: 9 Bytes: 104 Cardinality: 8
2 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
12 SORT AGGREGATE Bytes: 16 Cardinality: 1
11 FILTER
5 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT_EVENT Cost: 9 Bytes: 16 Cardinality: 1
4 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
10 FILTER
7 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT_EVENT Cost: 9 Bytes: 108 Cardinality: 6
6 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
9 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT Cost: 2 Bytes: 9 Cardinality: 1
8 INDEX UNIQUE SCAN INDEX (UNIQUE) od.XPKPROJECT Cost: 1 Cardinality: 1
Thanks
Deb

882134 wrote:
Can any body give me some light why upto Select statement cost is ok, but only Update statemet is take huge 11m costing.
thanks
DebOkay so completely ignore the content of the 2 forum posts.
Why is the cost an issue for you? Without your tables, data and environment, and without a readable execution plan it's difficult to help you.
Maybe you could read the link I gave you and post some of the information it talks about up here.
p.s. read the link.

Torch 9800 Issues with updating software

Hi there I'm new to this forum and to BB.
I have been having issues with my Torch for a couple of weeks now, firstly I had issues with it when it was charging the red light and not coming on, but managed to get it to work after a bit of searching on here.
This happened regularly over the past week, then today I have the Error 507 message.
I have used Desktop Manager v5.0.1 to try and update it but I didn't have the password for the phone and after 10 attempts it wiped the phone which I wasn't really bothered about.
I am now trying to update the software but when I get to the Device Application Selection page it says that I have don't have any space left.
Is there any way around this so that I can update the phone's software?
Any help would be much appreciated.
Clwyd

Hi! Welcome to the forums.
Please keep us posted and goodluck.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Issues with updating my NOKIA 5800 XM

Hi all,
I don't know, whether this topic has been already covered, but I haven't found anything suitable for me. Here's the problem. I have a NOKIA 5800 XM and I want to update its' firmware to v30.0.011. However the standard procedure to update it using my phone did not succeed - while checking for the new update, an error appears, saying "Connection error" (i am using OMNITEL Lithuania). However, the last time I was updating my Nokia, everything was ok doing it this way. The other point is, I have a MAC, and when i tried to update using Nokia Software update using my friend's PC, i did not succeed - there were errors as well. So, can anyone help me with this?
Thanks in advance

I have a similar problem. My 5800's clock is very slow. It falls behind by maybe up to 3 hours per day. I have to continually correct the time all day. Today I was correcting the time when the phone gave me an error message and I lost all of my videos and photos. Luckily my contacts and messages were not lost. I was hoping a Firmware update would solve the bugs with this very frustrating phone. No luck. I installed the Nokia PC Suite and the Updater doesn't work. I always get an error message and whatever Internet Explorer wants to open fails. I then loaded Nokia Software Updater and continually get a disconnection error message. I've been trying all afternoon. This website is very slow and frustrating as well. After having been a Nokia user for many, many, many years. I can't help but be unbelievably disappointed with my new phone. If anyone can help with the Firmware Update issue. It would be much appreciated. Thanks.

Issues with updating my apps

I'm having issues updating my apps after I updated to the iOS 7. Everytime I try to update certain apps this message would pop up saying "Update unavailable with this apple ID" And I never used another apple ID other then my own ever since I got this phone. And believe me I tried everything. I signed out and back in. Turned off and turned on my phone. Even tried the reset thing. Nada. I finally resorted to deleting the app and hoping I can redownload it. Didn't work. The same message would pop up and I'm not even updating the stupid app. To make it worse. It's happening on my itunes too. Help?????

I dont know, it is not even visible in the purchase list!!! Meanwhile Apple Support suggested:
I understand that you are having difficulty updating your past purchased "Week Calendar" app. Ill be glad to help you with this.
I checked your account and I noticed that your original purchase for this app has already been refunded back in 06/26/2012. You may not be able to update it due to the refund.
I also understand that when you tried to repurchase it, it does not give you option to purchase it again. To help resolve the issue, please log out on your iTunes account and purchase it again while logged out. It will then prompt you to log in on your iTunes account and be able to purchase it successfully.
Interestingly, it was NOT refunded, but anyway maybe a system error, as not visible in my purchase list either.
NO problem, I would buy it again, but i CANT :-)))) as system says I have it, so I'm entitled for free update, then I press ok, and it says I cant.
It is really ABSURD. :-))))

Issue with updating service notification using BAPI_ALM_NOTIF_DATA_ADD

Hi experts,
I would be very grateful if anyone could help me out with this.
I need to update the object code damage code and cause code of the notifications (transaction iw22) through portal. For this I have made a z BAPI and am calling it through portal. Now for my notification type H1 the damage and the object part are mandatory and the cause part is not. Now while trying to update(through portal) any H1 type of notification which already has object part and damage part filled but cause part blank I am getting the error notification locked by EPUSER. When I run the same z bapi on R3 giving same data then error doesnt come and every thing is updated successfully.
Even from portal I am able to update other type of notification where either all damage cause or object part is blank or filled. This particular issue happens only the notifications having only cause part is blank.
The logic that I have used to update the notification where cause part is blank is I have called first ALM_NOTIF_DATA_MODIFY and have passed the damage code and object code table(notifitem) in its parameter so that damage code and object code can be modified(i havent passed the cause code table as passing empty cause code table(Notifcaus)to this bapi throws error) after calling this bapi i have called BAPI_ALM_NOTIF_DATA_ADD and in its parameter i have passed only cause code table(Notifcaus ) (I havent passed table having damage code and object code) . So on the successful execution of this two bapis i should get the updated object, damage and cause codes.
There is a sap note 1058895 which talks about the same issue but even after applying that note same problem is coming. We raised and OSS message to sap to but I guess it wont be of much help.
My observation is that after calling ALM_NOTIF_DATA_MODIFY as I am trying to call ALM_NOTIF_DATA_ADD for same notification so its throwing the lock error but the point is that why then from the R3 side this error is not coming. Are there any FM to enqueue and dequeue notifications like we have for employee numbers in HR module.
Regards,
Mehul

Hi,
Check out the thread below. It might be of help.
Re: update PM notification through fm/bapi
Also, post it in ABAP->General Form for a quicker response.
Thanks
Nidhi

Issue with update to 10.6.5 and WIFI connection

I have been having an ongoing issue with my MBP over the last 6 months and even more consistently within the last several weeks.
I have searched the other posts and I think that I might be making a connection here. So, please chime in if you have anything to add to solving or addressing my problem as I think that there are others out there suffering.
Issue in short: Waking my MBP from sleep mode or turning it on loses my connection to my WIFI that is password protected.
Mainly when I wake my MBP from sleep mode this occurs a lot.
I have contacted AppleCare many times and have taken my computer to the Genius guys and I have done the following:::
Genius guys tested the computer and could not replicate. No hardware issues found, must be a software issue.
AppleCare, done many things to reset the computer, re-installed Snow Leopard, deleted Caches and other things.
Now, I am wondering if there is something actually due to the OS updates after 10.6.2 or 10.6.3 that is causing my issue that much more.
I can see my wireless router as available to join, I select it, type in my password, and it states invalid password. Try to restart, reboot, and nothing. It almost appears that it loses the sync between my keychain and such.
As of late, as I stated, the problem is more persistent now.
What do you think? An issue with the latest updates of 10.6.5?

I too often have a devil of a time connecting to a Linksys WiFi router with a brand-new unibody MacBook Pro 15", 2.66GHz. I noticed that if I boot the machine off an external Firewire drive this seems to be more of an issue than if I boot off the internal drive.
I beginning to thing there's some kind of interference between the Firewire system and the WiFi system.
The router is a Linksys with the latest firmware update. My MacBook and iPhone 3G, iPhone 4 connect to the router fine.

Issue with updating partitioned table

Hi,
Anyone seen this bug with updating partitioned tables.
Its very esoteric - its occurs when we update a partitioned table using a join to a temp table (not non-temp table) when the join has multiple joins and you're updating the partitoned column that isn't the first column in the primary key and the table contains a bit field. We've tried changing just one of these features and the bug disappears.
We've tested this on 15.5 and 15.7 SP122 and the error occurs in both of them.
Here's the test case - it does the same operation of a partitioned table and a non-partitioned table, but the partitioned table shows and error of "Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'".
I'd be interested if anyone has seen this and has a version of Sybase without the issue.
Unfortunately when it happens on a replicated table - it takes down rep server.
CREATE TABLE #table1
 ( PK char(8) null,
 FileDate date,
 changed bit
CREATE TABLE partitioned (
PK char(8) NOT NULL,
ValidFrom date DEFAULT current_date() NOT NULL,
ValidTo date DEFAULT '31-Dec-9999' NOT NULL
LOCK DATAROWS
PARTITION BY RANGE (ValidTo)
( p2014 VALUES <= ('20141231') ON [default],
p2015 VALUES <= ('20151231') ON [default],
pMAX VALUES <= (MAX) ON [default]
CREATE UNIQUE CLUSTERED INDEX pk
ON partitioned(PK, ValidFrom, ValidTo)
LOCAL INDEX
CREATE TABLE unpartitioned (
PK char(8) NOT NULL,
ValidFrom date DEFAULT current_date() NOT NULL,
ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
LOCK DATAROWS
CREATE UNIQUE CLUSTERED INDEX pk
ON unpartitioned(PK, ValidFrom, ValidTo)
insert partitioned
select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
insert unpartitioned
select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
insert #table1
select "ET00jPzh", "Jan 15 2015", 1
union all
select "ET00jPzh", "Jan 15 2015", 1
go
update partitioned
set ValidTo = dateadd(dd,-1,FileDate)
from #table1 t
inner join partitioned p on (p.PK = t.PK)
where p.ValidTo = '99991231'
and t.changed = 1
go
update unpartitioned
set ValidTo = dateadd(dd,-1,FileDate)
from #table1 t
inner join unpartitioned u on (u.PK = t.PK)
where u.ValidTo = '99991231'
and t.changed = 1
go
drop table #table1
go
drop table partitioned
drop table unpartitioned
go

wrt to replication - it is a bit unclear as not enough information has been stated to point out what happened. I also am not sure that your DBA's are accurately telling you what happened - and may have made the problem worse by not knowing themselves what to do - e.g. 'losing' the log points to fact that someone doesn't know what they should. You can *always* disable the replication secondary truncation point and resync a standby system, so claims about 'losing' the log are a bit strange to be making.
wrt to ASE versions, I suspect if there are any differences, it may have to do with endian-ness and not the version of ASE itself. There may be other factors.....but I would suggest the best thing would be to open a separate message/case on it.
Adaptive Server Enterprise/15.7/EBF 23010 SMP SP130 /P/X64/Windows Server/ase157sp13x/3819/64-bit/OPT/Fri Aug 22 22:28:21 2014:
-- testing with tinyint
1> use demo_db
1>
2> CREATE TABLE #table1
3> ( PK char(8) null,
4> FileDate date,
5> -- changed bit
6> changed tinyint
7> )
8>
9> CREATE TABLE partitioned (
10> PK char(8) NOT NULL,
11> ValidFrom date DEFAULT current_date() NOT NULL,
12> ValidTo date DEFAULT '31-Dec-9999' NOT NULL
13> )
14>
15> LOCK DATAROWS
16> PARTITION BY RANGE (ValidTo)
17> ( p2014 VALUES <= ('20141231') ON [default],
18> p2015 VALUES <= ('20151231') ON [default],
19> pMAX VALUES <= (MAX) ON [default]
20> )
21>
22> CREATE UNIQUE CLUSTERED INDEX pk
23> ON partitioned(PK, ValidFrom, ValidTo)
24> LOCAL INDEX
25>
26> CREATE TABLE unpartitioned (
27> PK char(8) NOT NULL,
28> ValidFrom date DEFAULT current_date() NOT NULL,
29> ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
30> )
31> LOCK DATAROWS
32>
33> CREATE UNIQUE CLUSTERED INDEX pk
34> ON unpartitioned(PK, ValidFrom, ValidTo)
35>
36> insert partitioned
37> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
38>
39> insert unpartitioned
40> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
41>
42> insert #table1
43> select "ET00jPzh", "Jan 15 2015", 1
44> union all
45> select "ET00jPzh", "Jan 15 2015", 1
(1 row affected)
(1 row affected)
(2 rows affected)
1>
2> update partitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join partitioned p on (p.PK = t.PK)
6> where p.ValidTo = '99991231'
7> and t.changed = 1
Msg 2601, Level 14, State 6:
Server 'PHILLY_ASE', Line 2:
Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'
Command has been aborted.
(0 rows affected)
1>
2> update unpartitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join unpartitioned u on (u.PK = t.PK)
6> where u.ValidTo = '99991231'
7> and t.changed = 1
(1 row affected)
1>
2> drop table #table1
1>
2> drop table partitioned
3> drop table unpartitioned
-- duplicating with 'int'
1> use demo_db
1>
2> CREATE TABLE #table1
3> ( PK char(8) null,
4> FileDate date,
5> -- changed bit
6> changed int
7> )
8>
9> CREATE TABLE partitioned (
10> PK char(8) NOT NULL,
11> ValidFrom date DEFAULT current_date() NOT NULL,
12> ValidTo date DEFAULT '31-Dec-9999' NOT NULL
13> )
14>
15> LOCK DATAROWS
16> PARTITION BY RANGE (ValidTo)
17> ( p2014 VALUES <= ('20141231') ON [default],
18> p2015 VALUES <= ('20151231') ON [default],
19> pMAX VALUES <= (MAX) ON [default]
20> )
21>
22> CREATE UNIQUE CLUSTERED INDEX pk
23> ON partitioned(PK, ValidFrom, ValidTo)
24> LOCAL INDEX
25>
26> CREATE TABLE unpartitioned (
27> PK char(8) NOT NULL,
28> ValidFrom date DEFAULT current_date() NOT NULL,
29> ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
30> )
31> LOCK DATAROWS
32>
33> CREATE UNIQUE CLUSTERED INDEX pk
34> ON unpartitioned(PK, ValidFrom, ValidTo)
35>
36> insert partitioned
37> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
38>
39> insert unpartitioned
40> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
41>
42> insert #table1
43> select "ET00jPzh", "Jan 15 2015", 1
44> union all
45> select "ET00jPzh", "Jan 15 2015", 1
(1 row affected)
(1 row affected)
(2 rows affected)
1>
2> update partitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join partitioned p on (p.PK = t.PK)
6> where p.ValidTo = '99991231'
7> and t.changed = 1
Msg 2601, Level 14, State 6:
Server 'PHILLY_ASE', Line 2:
Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'
Command has been aborted.
(0 rows affected)
1>
2> update unpartitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join unpartitioned u on (u.PK = t.PK)
6> where u.ValidTo = '99991231'
7> and t.changed = 1
(1 row affected)
1>
2> drop table #table1
1>
2> drop table partitioned
3> drop table unpartitioned

Help - issue with update 10.2.0.429

Similar Messages

Maybe you are looking for