HELP - It's not sliding!

Hi, sometimes I can't get my phone to unlock because it is not sliding! Is anyone else having this problem? Solutions?

Try a reset,, Hold the home button and the top button together for about 8-10 seconds. That should fix it

Similar Messages

  • Hi everyone,I have an Ipod 5 and its not sliding.it was working perfectly fine till last night.It was charging and  i was texting,so then my mom called me then when i came back its stop sliding(i cant get in)HELP!!!

    hi everyone,I have an Ipod 5 and its not sliding.it was working perfectly fine till last night.It was charging and  i was texting,so then my mom called me then when i came back its stop sliding(i cant get in)HELP!!!

    If not successful try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Help viewer does not work after update to 10.4.4

    Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Help button is not working in Infoview

    Hi All ,
    I am working on BO XI R2 environment and help button is not working properly in my infoview.
    I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
    I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
    Please advice what could be the reason.
    Thanks,
    Vivek.

    CLOSED

  • F4 help key does not work in ESS on ITS in Portal

    Hello All,
    F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
    regards,
    Saumya

    Hi,
      This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
    You have to set parameter ~webgui_popups 1 in the service file of this IAC.
    BR,
    Disha.
    Pls reward points for helpful answers.

  • HT4527 I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help a

    I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help as such

    Then stop trying to use HomeShare and use one of the other options listed in the document from which your question was posted.

  • Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

    Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
    I do not understand how a company like Apple puts experts to help users
    Please note that anonymous experts in Internet offer their help for money

    Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
    I do not understand how a company like Apple puts experts to help users
    Please note that anonymous experts in Internet offer their help for money

  • Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I cannot download word documents. Error message says assocated helper application does not exist.

    Tried downloading word document from email. error message Associated helper application does not exist

    To open a document you must have installed an Android application for it. The file is downloaded but can be opened with Firefox, but with the specific app from Android.
    Try installing a documents app and for sure it will work.

  • Drive Utility Help Viewer "does not know how to handle selected URL"

    I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

    In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
    As for problems with the Help viewer see:
    In most cases doing the following will restore the Help Viewer:
    1. Trash the following three files, if extant:
    /Home/Library/Preferences/com.apple.help.plist
    /Home/Library/Preferences/com.apple.helpui.plist
    /Home/Library/Preferences/com.apple.helpviewer.plist
    2. Trash the /Home/Library/Caches/com.apple.helpui folder.
    3. Empty the Trash and Restart.
    Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

  • HT1926 Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced

    Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Problem in Search Help[F4] - Values Not being Dsplayed

    Hi,
    Search help values are not being displayed.
    F4 help pop up is being displayed with the text on top: ' xxxx number of entries found".
    But no values are visible in that popup where it normaly displayes all values for selection. This is happening with all search helps.
    Example: I tried for Tcode: ME21, for field Vendor.
    =><i>No patch has been applied on Server recently.</i>
    Any clue on that..??
    Any help is appriciated.
    Regards,
    Vijay Raheja

    Hello Vijay,
    This is simple as well.
    Go to help then settings and then F4 help. Under system defaults tab strip you will find Display tab strip. Here go to change mode and choose dialog. The other choice will be for control only ( 2 radio buttons only this time around). However to do so make sure you have the authorization object S_ADMI_FCD with value TCTR.
    Ask yoru authorization adminstrator to make these changes. He would be having these authorizations. Normally all  users dont have this authorization as this is part of security audit considerations.
    Please award points if issue got solved.
    Regards.
    Ruchit.

  • I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password.

    I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password. Thanks alot for your help.

    Change your password.
    These are user forums. We can't do what you ask, in fact no one can.

  • Help something is not right!!!! Please email me!

    I have tried to connect my ipod, with a standard ipod cable, to my tv and the picture is in black and white and the picture continuously rolls. I have tried different tv's and even a different cable but no luck. What am I doing wrong? Settings are all set properly. Help!
    [email protected]

    Hello,
    Along with the advice you have been given before me, I also hope this is helpful and does not frustrate you.
    I recieved my iPod Video for x-mas, and of course like any techie I needed to put everything to the test.
    Like you I did not want to pay such an outrageous price just for AV cables, so I went to the nearest RadioShack store (not to much cheaper right?).
    Well I got the nearest tv and with anticipation I plugged my (gold tip btw, only da best for my iPod! lol), AV cables out (from the headphone jack), into the Video port of my TV. Can I tell you how frustrated I became when all I got was a black window? Color me confused (sound so nerdy now...), but I was just about done trying.
    Do you know what worked for me (and I am hoping it does for you too), I swapped the Yellow (Video Port), with the Red (Left Audio - or is it right, who cares by this point), and voila! It worked, I could now see the movies, videos, photos from my iPod Video on my TV (if you need also help w/the settings I can tell you what I have on mine).
    Good Luck, Hope this helps!
    WIC

  • In P6 P6 Help link is not working

    Hi,
    My P6 help link is not working in help menu.
    P6 Library and Support link are working.
    As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
    Can anybody help?

    Hi,
    We worked on this issue ,
    Solution:
    In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from  http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
    Then everything fine now,
    Regards
    Kumar

Maybe you are looking for

  • IQ770 computer to tv help

    I'm trying to get my touchsmart to show the video on it through my TV.  There are ports on the side of this model that say "TV IN" What settings do I or can I change to make these ports work in reverse and be outputs instead of inputs only?  I bought

  • Ical cannot get an outlook server calender

    Hi I work in a mixed pc/mac office. The pc's have decided to produce share and publish 1 office diary. Us mac users can't seem to find this office dairy anywhere. The pc's have sent us invites, yet we cannot see them.. we are completely stuck and the

  • How can we use the table partitions feature and.........

    Hai friends when i tried to use the bitmap indexes and table partitions feature , I got a message like this 'table partiotion feature not enabled' so please tell me how can i enable those features so that i will be able to use those features.........

  • Accidentally deleted photo booth?!

    i accidentally deleted my photo booth application from the computer, not the dock. i tried using pacifist with the os x instal disc and the applications install disc but i cant find the photo booth application anywhere. am i just not looking that wel

  • 3D Array: Can't replace subset 2D array?

    Hey guys, I've discovered (possibly) a rather odd event. In debugging my code I came accross my Replace Array Subset function to find it was the source of my frustrations. Either I don't understand how it works for 3D arrays (I use it alot for 2D, 1D