HELP! iTunes is encountering errors when I plug in my iPod

I have an 8-gig second generation iPod Touch. For a few months now I have been unable to sync my iPod due to the fact that when I plug it in it says that "iTunes has encountered a problem and needs to close", I've sent an error report numerous times but, as you know, that doesn't help.
I can still load music onto my iTunes and it works fine, also, my brother (who had the exact same iPod and uses the same PC as me) is fine with his iPod, he can sync it and everything. Can someone tell me what on Earth is happening?!
Thanks, in advance.

"Faulting application itunes.exe, version 9.0.2.25, faulting module quicktime.qts, version 7.65.17.80, fault address 0x00909a47."
Hmmmm. If we take it at its word, it's an issue with your QuickTime. I'm not convinced that that's the fundamental cause of your issue here, Zypo, but we should probably first try swapping out your QuickTime just in case.
Download and save a fresh copy of the "standalone" QuickTime installer to your hard drive (don't run the install on line). Get the version that doesn't mention iTunes:
http://www.apple.com/quicktime/download/
Quit iTunes if you have it open. (ITunes uses QuickTime, and if iTunes is open, it'll interfere with the uninstall.)
Now head into your Add or Remove Programs control panel. Uninstall QuickTime.
Next, we'll clear away any leftover QuickTime program files or folders.
(1) In "My Computer" open "Local Disk (C:)" or whichever drive your program files are installed on.
(2) Open the "Program files" folder.
(3) Right-click on the QuickTime folder (if it still exists) and select "Delete".
(4) Go back into "Local Disk (C:)" or whichever drive your program files are installed on.
(5) Open the "Windows" folder.
(6) Open the "system32" folder.
(7) Check for the presence of a QuickTime and a QuickTimeVR file. If either file still exists, delete each of them.
Empty the Recycle Bin and restart the PC. Now reinstall QuickTime by doubleclicking the QuickTimeInstaller.exe file you downloaded earlier.
Does the install go through okay? If so, try launching iTunes and plugging in the ipod again.
Still crashing, or does it work better this time?

Similar Messages

  • Itunes does not open when I plug in my ipod

    itunes does not open when I plug in my ipod mini!
    A window opens with the name of my ipod kiwi(E:) & a picture of a disk drive next to it.
    I have to manually open itunes. No error messages pops up, so I can't figure out what's preventing the system from recognizing my ipod. In the system tray in an icon safely remove hardware if I it click my ipod ejects. My ipod still charges as normal.
    Open itunes when this ipod is attached is checked off
    Enable disk use is checked off
    I ran a scan no malware
      Windows XP  

    So you connect the iPod containing a hard drive. I would guess you are using USB, right? Then Windows opens a window (wow, that's repetative) that identifies this as a USB hard drive.
    Am I close?
    It sounds like you've told the iPod to act in Disk Mode. On the same preferences pane that you are telling iTunes to open, uncheck the box for enable disk mode. the mini should stop telling your computer it is a hard drive.

  • Itunes won't start when i plug in my ipod

    itunes won't start when i plug in my ipod touch

    Good catch! Glad you got things working again.

  • I have just updated to itunes 11 and when I plugged in my ipod classic it locked up. When I tried again it said my ipod was corrupt and advised I reset it. I reluctantly did this as I lost all my music and now itunes just locks up when I plug in my ipod.

    I have just updated to itunes 11 and when I plugged in my ipod classic it locked up. When I tried again it said my ipod was corrupt and advised I reset it. I reluctantly did this as I lost all my music and now itunes just locks up when I plug in my ipod.

    Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.

  • ITunes won't open when I plug in my iPod.

    I added some more songs to iTunes, and when I plugged in my iPod, iTunes didn't open or anything. It did nothing.
    What do I do????

    Did you do this:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Itunes won't start when i plug in my ipod Touch

    When I plug my iPod Touch into my computer iTunes will not launch.
    I have iTunes version 9.0.3.15 and Windows Vista Pro.
    I checked in services and "iTunesHelper.exe" ; "Apple Mobile Device" ; "iPod Service" are all started and set to automatic
    Under OPTIONS in the summary tab within iTunes "Open iTunes when this iPod is attached" is greyed out and I am not able to select it.
    What am I missing that keeps iTunes from opening on its own?

    Under OPTIONS in the summary tab within iTunes "Open iTunes when this iPod is attached" is greyed out and I am not able to select it.
    Good Lord. I'm not sure that I've ever seen this hit someone in quite this context, but that's consistent with a blown-out iTunes preferences file (a greyed-out option that can't be selected).
    Before messing with your preference files, I think we'd better check to see if this is a user-account specific problem. (There's a different set of iTunes preferences files in each Vista user account ... so if it's a blown-out pref file causing your issue in the usual user account, you should be able to get iTunes launching when an ipod is plugged in in a different user account.)
    From the Start menu, choose Control Panel.
    Open Add or remove user accounts (If using the Classic View in Windows Vista, open User Accounts. Then open Manage another account).
    Select Create a new account and follow the instructions to complete the account setup process. (Give the new user account full administrative rights.)
    Once the new account is created, choose Log Off from the Start menu. Log into the newly created user account. (Don't use fast user switching to move between accounts.)
    Open iTunes in the new user account. The iTunes setup assistant will run. Don't add any files when prompted ... just let her open eventually to an empty library.
    Now go "Edit > Preferences". Click the "Devices" tab. Check the "Prevent ipods and iphones from syncing automatically" box. Click OK.
    Now quit iTunes. Stay in the new user account. Plug the Touch in. *(Do not associate the Touch with the empty library!)*
    Does iTunes launch for you? Or do you get the same trouble as in the usual user account?

  • Itunes never start up when i plug in my iPod photo 30 GB

    My iTunes never start up..im usin windows XP..i tried updatin it but an error occurs:I nternal file manager error..wat does this mean?HELP..im reali frustrated..iPOd is 100% not user-friendly!!!

    Will it start at all, or only without your iPod?
    There is a setting in the iTunes options menu which allows you to choose whether or not you want iTunes to open when you connect your iPod. I keep mine unchecked, and start it myself after my iPod is connected.

  • ITunes shuts down when I plug in my iPod

    I've used my iPod without a problem since Christmas. For the past week, when I plug in my iPod, iTunes shuts down due to an unnamed error.
    I have reinstalled all my USB drivers, removed all of my Apple software twice and reinstalled it twice (once with the guidance of an Apple tech via phone). The Apple tech guy sent me to the Apple store to replace my iPod, which I did. But none of that has fixed the problem.
    So now, I'm left with an empty iPod that can't sync with my library because iTunes keeps shutting down when I plug in the iPod. The people at the Apple store said they couldn't help me further because I have a PC. The people at Microsoft won't take any responsibility because iTunes is an Apple product. So, I'm left with a $200 iPod that is suddenly for some unexplained reason, shutting down iTunes. So now, both the iPod and iTunes are worthless.
    Does anybody know how to fix this problem? I'm a singer and depend upon my iPod for rehearsal, so I need it fixed ASAP. Any help would be much appreciated.
    Message was edited by: WhyWon'tThisAcceptMyName?

    Sorry I wasn't very clear the first time. Changing the Drive Letter is done through Disk Management in Windows. I suggested you open the itunes preferences in hopes that you would then be able to connect your ipod without it crashing.
    To change the drive letter:
    Since we know this trick works
    First open itunes, then select Edit-Preferences and leave this open.
    Then, follow the steps [here|http://support.apple.com/kb/TS1493]
    I use Q, R and T for my ipods so the computer doesn't confuse it with other removable devices.
    Message was edited by: hmacross

  • When I plug in my iPod Classic, it is visible in My Computer, but iTunes gives error message PLEASE HELP!

    When I plug in my iPod Classic, it is visible in My Computer, but iTunes gives an error message saying "The software required for this iPod is not installed corectly. Please reinstall iTunes to install the required software." It started completely randomly and now does it every time. I completely wiped out iTunes and reinstalled it via the intructions from this website, but it is still doing the same thing. Furthermore, when I go to Start, All Programs, the iTunes folder contains no data AND the desktop shortcup does nothing when clicked on. I have to go to Start, Run, and type in itunes.exe in order to run the program. Can anyone tell me what is going on?

    Do one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice (won't erase everything)
    > Go to My Computer (windows xp) or Computer (windows vista & 7) and see if iDevice shows
    > Restore the iDevice completely (will erase everything)
    > Make sure the iTunes and/or iOS firmware is up-to-date.
    The ones I cross over is the ones you don't have to do. This should help

  • When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing."  I can not access my Itunes library.  Also, an "error 7 Windows error 126" appears as well.  Any ideas?

    When I plug in my Ipod Touch to my computer I can not access my Itunes library.  The following message appears "The program cant start because MSVCR80.dll is missing."  Also, another message appears as well - "Error 7  Windows error 126" as well as APSDaemon.exe.
    I have NO IDEA what the heck to do.
    Any ideas?
    Thanks!

    Issues installing iTunes or QuickTime for Windows
    solving MSVCR80
    iTunes 11.1.4 for Windows: Unable to install or open
    Troubleshooting issues with iTunes for Windows updates

  • I have downloaded the latest version of itunes but when i plug in my ipod it doesn't come up as a device so carn't sync. Its like theres something blocking my computer link with itunes please help!

    I have downloaded the latest version of itunes but when i plug in my ipod it doesnt list any devices in itunes to enable me to choose my ipod to sync it. Its like there is a link missing or something blocking my computer talking to itunes. My computer itself recongnises the ipod but itunes doesn't. Please help!

    Yes reinstalled itunes a couple of days ago but got it sorted now thanks, the problem was that when i wiped my computer last week and reinstalled everything using the discs the free McAfee anti virus that the computer came with was still in my all programmes list although i aren't using it. This morning i tried unistalling that (didn't think it would make any difference as the programme wasn't active) once uninstalled i pluged the ipod in and hey presto it is now recognised by itunes, THANK GOODNESS. So panick over for now, thank you very much.

  • When I plug in my iPod to sync, my itunes freezes...Help!

    When I plug in my iPod to my Mac, my itunes freezes. Why is this happening? Help please!

    That is from iTunes on the computer. It is asking you if yu want iTunes to be used for as the default player for music.  Is suspect that you have a PC and that WIndwos Media Player is the default player.
    You can say yes, close the message (it will appear again next time) or check the box that says do not remenid me again and then close the message.

  • When I plug in my iPod to iTunes to sync i get an error message

    I get this when I plug in my iPod to sync now: The iPod "joanleigh's iPod" cannot be synced. an unknown error occured (13019). I don't know what would happen that suddenly i can't update my playlists on my iPod. What should I do?

    Even though it refers to iOS devices, it should or could still apply to your iPod Classic.
    http://support.apple.com/kb/TS2830
    B-rock

  • HT204302 i get a message when I plug in my ipod to my laptop saying "cannot use this ipod because apple mobile device is not started" can any one help me with this...I have never had this happen before

    Hello anyone
    I get a message when i plug in my ipod touch saying "cannot use this ipod because apple mobile service is not started" can anyone please help me with this problem...I had this message once before but I forgot how to correct it

    From the More Like This section on the right:
    I get error message when I plug in iPhone 4s saying "This iPhone cannot be used because the Apple Mobile Device service is not started"
    can't get my ipod to connect to tunes error message "cannot be used because the apple mobile device service is not started"  fixes? Using Win XP
    im trying to connect my ipod to itunes and its saying it cannot connect because the "Apple Mobile Device is not started" help
    Or see: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1481 I get a DEC Error when I plug my iPod into the auxiliary on my radio on my motorcycle

    I get a DEC Error when I plug my niPod into the auxiliary on my radio on my motorcycle

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • OSX 10.6.2 and Novell Netware eDirectory 8.8 SP5

    Ok, forgive the long winded post - but I thought some background would be in order. Briefly, the problem we have is: We create a new user in eDirectory, extended them with apple-user, add apple-user-homeDirectory of: /Network/Servers/<ip of server>/S

  • How do I use airport extreme to control individual device access?

    I don't understand how I can control individual device access to the web using my AirPort Extreme. I set up the network on a PC (for technical reasons) but hoping to control access of individual devices (including a Mac but also iPods and iPads) to t

  • Good Wireless Blu-Ray Players?

    I am going to buy a Blu-Ray player with built in wifi. I was set a on a few models but upon looking on this message board, the Samsung BD-C6500 and the LG BD570 have many issues connecting with the Airport Extreme. Does anyone know of any models that

  • Black border around games

    When I installed my games the game stretched to the edge of the screen. Today I tried to run a new game and now all my games have a thick black border around them and the game is small in the middle of the screen.  What happened?  How do I fix this?

  • Error:No text defined for language ZF usage A appl V.cond type ZABC(T685T)

    Hi Experts, I have created a new condition type ZABC for discount correction and the pricing is working perfectly as required. The issue is when I login using Chinese language ZF, then I get the below error in VA01- No text is defined for language ZF