Help -- iTunes Keeps Restoring Metadata After I Change It

I've spent a lot of time editing the metadata form my iTunes library.  Specifically, I erase the composer data for all albums except classical. 
However, the data keeps re-appearing for some iTunes.  For example, I'll spend time erasing all composer metadata.  I'll sign on in a few days, and for about 5 or six albums, the data has re-appeared.  I'll erase the composer tag again or replace it with a "space", but in a few days it's bad.  It's odd that this always happens with about 4 or 5 albums.  And then some albums it happens randomly.  On one hand, all of these albums have been downloaded from iTunes.  But I've got many, many downloaded albums that don't have this problem.
I do have a subscription to iTunes Match, but I've turned it off on the computer in question.
This is driving me nuts.  Any suggestions?
(ETA:  Is it possible that Match is replacing the information on my iPhone and that is over-writing iTunes?)

Yes, others are seeing this. Something in purchased media (I am pretty sure this has only happened with purchased media) is periodically checking back with the iTunes Store and resetting the tags in the iTunes library file but not in the actual media files (metadata are stored in both). I haven't seen a truly systematic diagnosis of the issue (I use an old iTunes and have no iTunes account so I can't test anything myself). There are temporary workarounds but tags will still revert after a time. 2014 discussion about edited tags for Store purchases reverting to originals - https://discussions.apple.com/message/26077896 - edited tags are still present in the media file but revert to the originals in the iTunes library file. Workaround is to refresh tags so media file tags are re-read and used in library file. https://discussions.apple.com/message/26193185 Send feedback to Apple about this so they know it is an issue they need to investigate: http://www.apple.com/feedback/itunesapp.html Don't expect an immediate solution but maybe the next time they update the software it may be resolved.

Similar Messages

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • My iTunes keeps shutting down after i plug in my iPod

    My iTunes keeps shutting down after i plug in my iPod. First it just wouldn't open but now it finds my iPod and then shuts down, it closes it's self. can anyone help?

    The five R's don't work because I don't have enough time to restore iPod before it shutsdown, and reinstalling iTunes didn't solve it either.

  • Itunes keep popping up after i quit itunes

    itunes keep popping up after I quit?

    Same here, I still can't quit itunes, tried force quit and activity monitor quit. Been like this for several months. Don't have any widgets that I know of, where can I search for them (nothing in my dashboard). Please help thanks.

  • Help - iTunes keeps telling me iPod in recovery mode needs to be restored

    I have updated my software for my iPod, but it keeps telling me to restore to original settings. I have restored 5 times in a row, but still won't let me into iTunes. Any help would be appreciated.

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • HELP iTunes Keep Changing Track Information

    I'm having a really big issue. I finally took the plunge and decided to properly label and categorize all my music. I spent almost a month, 3-4 hours a day, getting all the album art, correcting all the information, etc on 4,000+ songs. At the end I was SO pleased. However this past week I started to notice something was wrong. The names of of some tracks were changing back to their old names, also in the comments field I hate reading all the crap people write in their so I cleared it all out, now it's coming back too! What's going on! Can anyone help me make it so whatever I change the tracks info to it sticks?

    Go into Windows Media Player and turn off all automatic updating of info.
    Tools -> Options -> Library -> Automatic media information updates for files.
    Note that the tags have already been changed by WMP and when you play them in iTunes, the info will change to match the tags that WMP has already changed.
    You will need to update the tags to get the correct info which WMP deleted/changed.

  • ITunes keeps re-configuring after opening

    My problem is my itunes keeps re-configuring each time i open up iTunes, this usually only happens after an update, then you agree to some terms .... etc.
    Now it happens everytime! I had this problem b4 but i forgot how i fixed it.
    "Please wait while windows configures iTunes" and you wait some time while it does it. I've tried reinstalling it and that doesn't seem to work... neither does removing Pref folders.
    PLEASE HELP!

    Its cool, here's what you have to do
    go to start menu --> run
    type regedit, press enter
    go to computer/hkeyclassesroot/
    find pcast (make sure its pcast and not .pcast, the one you want is nearer the bottom) and right click it
    click permissions
    during the course of this you may get a message saying you cant change anything, but you can change who can change things. just click ok.
    click advanced, then owner tab
    change the owner from administrator to whatever name you are using by clicking your username in the box
    click ok on both pop-ups to get out of them completely
    right click pcast again
    click permissions
    click OWNER RIGHTS
    click the allow boxes beside full control and read
    click ok and then exit the program
    All set! Now open iTunes normally and it should be fine. Hope this helps.

  • ITunes keeps unexpectedly quitting after installing Leopard

    After installing Leopard, iTunes keeps unexpectedly quitting? I've tried recreating the iTunes library with no help.

    i had the same problem. finally i found out what was going wrong. it was the digi core audio extension that messed up my itunes. so if you are using pro-tools you should have a look into this possibility.
    if not you might want to try and remove any non-apple audio extension and see what happens. don't trash them as you might be able to pin point the problem to only one extension.

  • My Itunes keeps freezing up after the resent update was installed.

    My Itunes keeps freezing up right after the resent update was installed. What can I do to fix this issue. Please help.
    I Unistalled and reinstalled Itunes, But that didn't work.

          Reset PRAM.  http://support.apple.com/kb/PH18761
          Reset SMC.     http://support.apple.com/kb/HT3964
         Choose the appropriate method.
           Start up in Safe Mode. http://support.apple.com/kb/PH18760
           Repair Disk. http://support.apple.com/kb/PH5836

  • HT5194 I updated to OS 6 on iPad2 n updated iTunes 11. n made iTunes as restore. After the updates when I open notes they are all gone !!! When I open Notes it says New notes and the left margin is blank.  When I try to Search in notes nothing found. Pls

    I updated my iPad OS to  and also updated iTunes to 11.1.2 and selected iTunes as restore while still sync with the HP Laptop. Now when I open Notes every note is gone! I have to get all my notes back someone please help! Thanks 728

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Help itunes keeps freezing

    Itunes keeps freezing, i have  a pc with windows 7 installed and itunes worked fine until today: 2/22/2012 now i cant sync my ipod and put music on it please help me!!!

    Fixed i found out how to fix!!!

  • New ipod 7th generation on connecting it to win 7 pc it needed formatting to fat32 then it said connect to itunes to restore then after connecting the ipod to pc the ipod screen is white with "do not disconnect" but it is taking along time

    On Connecting my new ipod nano 7th generation to pc win 7 pc pop a message that it need to format that space. after formatting i tried to open the ipod it said connect to itunes to restore just when i connected it to the pc it turned white with "do not disconnect" but i didn't do anything on itunes i can't see it on itunes and it is taking along time is this normal

    - Try another cable.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Try on another computer to determine if computer or iPod problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Why do i have to keep pressing f5 after every change in CSS to see liveview?

    I have to click/F5 on live view button  after making changes in CSS every time i change anything. is there a way to make live view automatic?

    Luis, I import the clip from a folder on my hard disk that does replicate the file on the camera card, and the clip does have a little camera icon in the bottom left corner of the screen (see the images below).

  • Keep video metadata after exporting MOV files

    Hello !
    I use LR5 to manage RAW/JPG/MOV files from events where I have taken pictures from. Most of the MOV files do either come from my Canon Camera or from my iPhone.
    I regular export the files in a reduced file back to my iPad or iPhone for "public" viewing. Unfortunately LR5 is loosing all metadata from my videos, especially creating date/time and GPS tags.
    Is there any way to include metadata in exported (and compressed) video files ? It works in photo's very well.
    If not, do you know any other program which can compress original video files from my iPhone and keep the metadata ?
    Thanks

    Cragen,
    A very Good Day!
    Lightroom does not read metadata from the video files till the version 5.3.
    However, the functionality may came as a feature in the coming version of  Lightroom!
    If the same is not visible in Lightroom make sure the files are copied to the system and then check the same in Lightroom
    Source: http://helpx.adobe.com/lightroom/kb/metadata-doesnt-import-video-files.html
    Let me know how it works.
    Cheers!
    Mandhir

  • ITunes keeps launching even after closing.

    After upgrading to Yosemite, iTunes will spontaneously start after closing iTunes 12.01.26

    Close is not the same as Quit:
    click the red ball on the left top and iTunes window is closed, but iTunes is still running: see the light under the Dock icon;
    to quit you must quit from the menu bar, or when it is the foremost window by CMD Q key combination.

Maybe you are looking for

  • In OS 10.6.8 how do I turn on printer sharing from terminal?

    I have a Mac Pro and I need to share a printer, however every time I go to sharing and try to select printer sharing preferences crashes. Is there a way to turn on printer sharing from termina?

  • How do i set up wifi calling?

    How do i set up wifi calling?

  • Internal order with invetsment measure

    Hi friends i am developing report on capex investment measures , Please tell me how i will get link of IO to position id of investment measure Regards Avadhut

  • ARD 3.3.2 Client Computer "OFFLINE" HELP?

    Hi, I have ARD 3.3.2, my master computer is a macbook pro and my client computer is a macpro The macbook pro is connected via wifi The macpro is connected via GIGABIT ethernet This set up has been working amazingly for weeks and all of a sudden tonig

  • A simple question about KEY-CREREC trigger

    Hello friends at www.oracle.com , let's suppose you create a KEY-CREREC trigger with a simple CREATE_RECORD instruction; this trigger is located at form level (that is, is not located at any block). If this KEY-CREREC trigger is located at form level