Help! Itunes will not install because it cannot access and HKEY

Error reads as follows:
Coult not open key:
HkeyLOCALMACHINES\software\classes\QuicktimePlayerLib.QuicktimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel.
I ran regedit and found that this Hkey does not exist in the registry.
I just bought this Nano. Why won't Apple help me with the install. At this point I feel like taking this piece of junk back to the store and buying a piece of hardware that is not dependent on a piece of software that cannot even be installed.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Similar Messages

  • ITunes will not install because it cannot remove an earlier version of Bonjour...HELP!!!!

    When I try to install iTunes 10 it cuts in about 3/4 of the way saying that "Cannot remove and earlier version of Bonjour"....PLEASE HELP!!!!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another install. Does it go through properly this time?

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • ITunes will not install because VB Script is not installed or enabled-help

    Where do I find VB Script or where do I look to enable VB Script. And if anyone has had his error message, will the VB Script solve my problem

    First of all, be sure you have downloaded the itunes or safari installer into an easy access folder, i.e. "C

  • ITunes will not install because my Computer is missing a file QuickTime.msi

    Hello, I have uninstalled all my apple files except those for QuickTime because it needs QuickTime.msi. Installing iTunes fails for the same reason. I have searched all of my C Drive and it does not exist. My laptop was originally running Vista and perhaps upgrading to Windows 7 is somehow involved? Can anybody put me on the right track?

    This problem can often be fixed with the Microsoft Insaller cleanup utility.
    Unfortunately The Microsoft Installer Cleanup utility has been with drawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
    Google msicuu2.exe download
    mydidgitallife has a copy of version 3
    Check for malware before installing it.
    To run the program – All Programs>>Windows Install
    You may need to use "Run as Adminsitrator" if you get an error trying to run it.
    I would try to uninstall all iTunes related programs using this method:
    http://support.apple.com/kb/HT1923
    This will allow you to find which ones will not uninstall. Then use the Cleanup utilty to remove those programs
    Then try installing iTunes again.

  • Itunes will not install, so I cannot get my phone synced

    I uninstalled my previous verson of Itunes and quick time and I even ran the the microsoft install cleaner, but I still get an error message when I try installing. The error message: the installeer encountered errors before iteunes could be configured. Your system has not been modified. to retry these operation at a later time...

    I had to uninstall itunes, deleted files in my music libary- renamed my itunes music file to tunes. Then installed itunes 10.7. Finally plugged phone back in and restored. Now it is working but what a pain.

  • Lightning will not install because Thunderbird cannot modify the needed file

    Am using OpenSUSE with a shared .default file for Linux and Mint, where it works. Originally the file loaded but the calendat was unresponsive. Removed and tried to reinstall and now get the above message.
    What file does it need and how do I get it to be modifiable while using a common .default file?

    Check the file ownership, i.e. the user id which owns the file. There is a numeric value behind a user name. My best guess is that the numeric user ids are different for your OpenSUSE and Ubuntu installations.
    Start in the extensions directory for Lightning of your Thunderbird profile. This should be something like:
    /home/<user id>/.thunderbird/<profile name>/extensions/{e2fda1a4-762b-4020-b5ad-a41df1933103}

  • HT1349 I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and wont let me run itunes help me fix it.

    I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.

    MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776

  • My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    Many thanks.
    Error 7 (Windows error 127)
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • HT4623 i am unable to backup and sync my iphone since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?

    Since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?

    Update your Mac OS level.

  • FMLE will not install because of 1324 error, path has invalid character???

    FMLE will not install because of 1324 error, path has invalid character???
    Seems to be a somewhat common problem (by google search) for Adobe and Microsoft programs, but nothing on FMLE...
    Everything I have tried (from google'd suggestions) has not worked.
    I suspect that the installer is trying to install to an invalid path but I cannot find it in the registry or figure out why the error.  The program was previously installed and working, but after having some issues I tried to re-install and find myself here!
    Any help is greatly appreciated.
    HP Pavilllion dv6700 Laptop
    Intel Core2Duo T5450
    Vista 32-bit

    Solved!
    It would appear previous version could not be uninstalled because of invalid path {somehow over time windows had re-assigned drive letters such that previous location of install on external hard drive F: (as in registry), was now pointing to DVD drive F: and I assume generated the 1324 error, path has invalid character}.
    Used Revo Uninstaller to clear all traces of former install and "voila", fresh install of FMLE proceeded successfully.
    Hope this helps others with this error code.

Maybe you are looking for

  • Exchange 2007 - unable to connect to smtp after severall hours

    Hi, We have a Windows SBS 2008 server with Exchange 2007 SP3. After severall hours we are unable to connect to the server with telnet on port 25 from outside. Sometimes a local telnet on the server still works but not always. The only solution is to

  • How to create an iview for ABAP Webdynpro Application in Portal?

    HI, I am Webdynpro Java webdynpro developer. I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

  • Help with adding a table and column which are strings to a database

    I want to add a column and table into a database. I want to do this both for the Table and Column. I want (Data) and Test to be replaced with my strings. String MyData = "My column"; // This will change at times. String MyData2 = "My table"; String s

  • Transfer and sync info

    Lost my Palm Tungsten E2. Purchased a used one as a replacement. Tried to sync my contacts after changing user name. Didn't happen.  Password shows as "assigned"  Don't have clue as to my original password. Would also like to delete a program install

  • Bluetooth issue after 7.4.1. upgrade

    After upgrading my MacBook to Lion 7.4.1, Bluetooth is behaving badly. I have been using Bluetooth to send files between my MacBook and iMac for three years, with no problems. Now, I never know whether they are going to communicate with each other. S