HELP - iWeb removes pages after successful publish to web

Hey, I've been using iweb for about 10 months with no problem, but recently when I publish my sites to the web all is ok. Then I save iweb all is still ok. Yet after I close and reopen iweb some of my pages in one site are blank and I have to start them over again and re-publish. Then the same thing keeps being repeated, but only to those same pages. Does anyone know why this is happening? Could it be the external WD hard drive i have connected?
Thanks.

Welcome to the Apple Discussions.I use iWebSites to manage the multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me open, edit and republish one site at a time.
OT

Similar Messages

IWEB An error occurred while publishing file "/Web/Sites/iWeb/t etc etc

An error occurred while publishing file “/Web/Sites/iWeb/testsite/workfiles/DSC04544.jpg”.
this is the message i get every bleeding time I try to update my page. anything I can do, or is it just the mac crew that have buggered up thier RUSHED update.
angry mac fan.

yes - I have just done it - I tried to publish again
and got the same error, but on a different file...
bummer - this is really fustrating
This problem has been floating for several days already. There was a previous forum 'iWeb Publishing Nightmare' which ran over 4,500 people participating in comments and sharing their problems. Many had proposed solutions ending with more frustration among MacUsers.
All I did was downgraded back to 1.0 and shall wait until a fix is at hand. Use your original installer and choose custom, then select iWeb only.
I use iWeb for my work particularly every hour ... uploading work to clients. So I can afford time wastage here. I don't use or need 'Comments' nor the extra 6 new templates. My entire site is running over 100 pages with several sites.
dreamery
http://web.mac.com/joeleong/iWeb/dreamery/home.html

Update iWeb photo page after re-editing photos?

Some time ago, I created a page using iWeb and published a number of photos to it by sharing them from iPhoto. Since then, I have re-edited the photos in iPhoto. Is it now possible to have iWeb re-publish the page using the re-edited photos without having to start all over by re-sharing them into a new web page?
Thanks.

Bob:
You'll have to import the edited version into iWeb while editing that page in iWeb and replace the older version with the new.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Azure Website not reachable after successful publishing via VS

Hello,
I created a website (which locally runs without any problem) in VS 2013 pro and published it to Azure with Azure Tools. Everything looks good when publishing (the wizard says it can connect to the new web address and 'Web Publish Activity' tool window says
'Publish Succeeded'.)
However, when I try to browse the site on Azure ('https://www.yoursite.azurewebsites.net/') it doesn't work and I get ther error 'ERR_TUNNEL_CONNECTION_FAILED'.
Am I missing something? Do I have to do something in addition to just publishing the site from Visual Studio?
I'm quite unexperienced with Azure. Can someone tell me what the problem is or where I have to search for it?
Thanks in advance
Thomas

I have seen this happen a few times myself, It is the time between the deployment and the site start that is causing this issue, If you deploy from Visual studio, Visual Studio pops up a browser window for your site, sometimes for a large site that browser
starts before the site does, you can try a inprivate session and hit your site after VS deploys.
The issue happens as VS doesn't know the site has come up :(.
Let us know if you are not able to hit the site after the VS in any browser session, that is a serious problem that needs to be addressed.
-CB
Mark as Answer, Helps us help you better ! :). = CB

IWeb quits and doesn't publish updated web pages

I have 4 sites that I have published and maintain. I changed the theme on one of them and now iWeb will not publish it. It actually does prepare the pages and a popup opens saying it will publish in the background but then less than a minute later, the application quits abruptly.
Here is a portion of the error report:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000001d
I have deleted the library/preferences file and repaired the permissions using Disk Utility.
I've attempted to publish to a local folder and publish from there.
Nothing has worked. Any ideas?

It might. You might try creating a new page in the theme you want and cut and paste the elements from the old page into the new one. Delete the old page, rename the new one to what the old one was named and see if you can publish.

Removing white border when publishing in web

Hi
There seems to be a default white border around the web
published version of my CAL metarial. See below
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
How do I remove it so the CAL material is flush against the
corner edge of the web browser
Thanks in advance
Jon

Set the margin and padding on the body tag of the html page
to 0. You can
do this directly in the tag or with CSS.
HTH;
Amy
"webacity" <[email protected]> wrote in
message
news:et3gfp$hgv$[email protected]..
> Hi
>
> There seems to be a default white border around the web
published version
> of
> my CAL metarial. See below
>
>
http://www.lshtm.ac.uk/dl/programme/sample/whitegap.gif
>
> How do I remove it so the CAL material is flush against
the corner edge of
> the
> web browser
>
> Thanks in advance
>
> Jon
>

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe account

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe accouI trying to publish a web page from iweb, but it doesn't recognize my MobileMe account, what can I do?

MobileMe has been discontinued for over 2 years now. You'll need to find a new hosting server for your website.
This may be of help to you: Life After MobileMe.

IWeb movie pages, when published -- no movies

my iWeb movie pages, when published, came up lame, no movies, only areas where the movies should have been, all with faint Q's with question marks inside them
LONG STORY SHORT, MAKE SURE YOUR MOVIES (as well as being located in your MAC HD and its proper MOVIE sidebar, that you CUT AND PASTE all your MEDIA YOU'RE USING IN YOUR iWeb SITE,
CUT AND PASTE PHOTOS, MOVIES in dupe form right into your desktop where you've published your iWEB site folder.......that way, any browser, a .mac or outside web host, can locate your media better so that you don't get GHOST MEDIA PUBLISHING LIKE I DID...hopefully this will help both of us
ALSO, in any iWeb website (named SITE in your desktop, or iDisc, or whatever or wherever you publish it, or even if you can find where on earth on your HD it is published, remember, if you have any MEDIA at all, NOTE IN MY CASE MEDIA MEANS MOVIES (not photos, so I'm not speaking to the photo blogs people, only iWeb MOVIE folks) anyway, all the compressed poetry video clips are right there, in a separate folder called MEDIA, that is every iWeb site, when published to .mac or a folder, which contains movies in .mp4 format or .mov format, all these will appear right in your site's MEDIA FOLDER....
this is important as a concept....
also, if you're using an outside web host like me (so that all my movies will LOAD QUICKLY), don't forget when FTP'ing (file transfer protocol'ing) your iWeb changes to your web host from your original MAC HD folder....remember to also send to the FTP/outside web host your MEDIA folder inside your SITE
(which i only realized a couple hours ago, and which totally was a revelation, so i'm passing it along to you guys)....
if you'd like to know exactly what i do here in nyc, i video the poetry scene, now for 20 years, and create educational poetry DVDs.... and my website is today's equivalant of operating a virtual business.....
....oh-oh, since I video poetry in NYC and go direct into a standalone DVD recorder to make single tracks of each poem...and then through Popcorn's mp4 program, I can make a movie file
then..through QuickTime Pro's streaming compression system, reduce that file size to under 5 MBs,
well, after lots of headaches, i am able to have 200 streaming video clips on an iWeb site, which apple itself said was impossible, that iWeb was only geared for less ambitious projects
okay, so that is cool..until yesterday, when i began the whole process again with completely new poetry video clips....
first, the iWeb pages were designed correctly...that took time....then i published the new pages to .mac, and only some of the movies showed up on the published pages, some had a big bright Q (which means the browser identifies the movie and will within 20 seconds load that movie), but what wracked my brain all day and night yesterday, why were there areas where the browser only showed the faint Q/Question mark inside (meaning the browser cannot find the movie)
so what the.....!
also i'm going from an iWed Folder to an FTP so I can use an outside web host and bypass THE MUCH SLOWER .mac browser (too slow when using movie clips for visitor to your site having to wait valuable seconds for **** movie to appear...with outside web host process almost immediate)
.....any similar experiences?

I am having the same problem.
Now I am using iWeb 2.03. So when I uploaded the site to my server I see the Media folder you were talking about, and the videos are there. But when I go to the website I still get the faint Q with the question mark.
Here is my site. http://mnorland.dadeschools.net
The videos are supposed to be in the Athletics page, then go to football highlights.
Any help would be appreciated.

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. Help!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!

Good morning Old Toad.
I did as you suggested:
1) Booted from install CD.
2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
So there's no change in my status.
I'm trying to delete the files because:
A) They already take .5 Gb.
B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
Thanks for your help. Any additional suggestions would be appreciated.
G4 Mac OS X (10.4.6)

Toolkit for CreateJS showing blank HTML pages after publish on only some Flash projects?

When I used Toolkit for CreateJS on Flash CC for the first time on a simple test movie, it worked fine. I've now created a new movie of a scrolling portfolio banner to go on my homepage. After hitting publish, it only shows a blank HTML page, with a white box the size of the stage.
I even tried it again when removing the buttons and tweens and still no joy. Is there a way I can upload both files to show you and to see if there's a difference in which why the newer one isn't working. Both have more than one layer. The test one moves out of the screen, while the new one fades out. I've even tried putting an alpha effect on the test to see if it doesn't play, but it still works fine.
Please help.
Thanks
Adam

Do you see any errors listed in the output panel?

Web pages are different after I publish-hyperlinks off, and more...

I created eight web pages with hyperlinks on photos and text. The photo hyperlinks work, but the text links do not.
Some of my formatting has changed after publishing. Most common example, I have a thin, white line above several photos. I've tried several ways to correct the problems, all to no avail.
After I publish to a folder, how do I find the file size of what will be published?
Thank you, in advance.

Some of my formatting has changed after publishing.
Most common example, I have a thin, white line above
several photos. I've tried several ways to correct
the problems, all to no avail.
The easiest way to get rid of this white line...click on the affected photo, open up the Inspector and click on the Ruler tab. Now increase the height of the photo by one or two pixels. This should work.
The other method is to select the affected photo, open up the Inspector to the Shapes tab and change the opacity of the photo to 99%. This should also work.
Basically, both methods work by forcing iWeb to re-render the image as PNG by changing the photo ever so slightly.
After I publish to a folder, how do I find the file
size of what will be published?
After you publish to a folder, just select the folder in the Finder and type "Apple-i" to get the size of the folder. Is this what you are after?

Contribute CS3 embeds the contents of SSI Includes into page after Edit and Publish

I have tried every possible way to figure this out but it
seems as though no one has this problem or a solution...
My Dreamweaver CS3 Template based files that have SSI
Includes placed in a "non-editable region" of a template and/or
nested templates are continually embedded, merged, or hard-coded (I
used those keywords for anyone else who might be searching for help
on this frustrating issue) into the page after it has been edited
and published with Contribute CS3 for Windows.
After many, many, hours and days rebuilding templates
(thinking that it was my code), experimenting with .htaccess
include_path variables, and cursing this application, I have come
to one conclusion - if I put my includes within "editable regions"
in the templates or the template based pages, edit and publish the
page with Contribute - then the page is saved normally, with the
includes intact and not embedded within the page. This is of course
not necessarily desirable!
I have tried using various types of include directives like:
<?php include('footer.inc'); ?>
<?php require('footer.inc'); ?>
<?php virtual(footer.php'); ?>


All Includes are merged into the template-based page after
the page has been edited and published with Contribute - if they
are in "non-editable regions"!
Please, someone point me in the right direction - if it's
calling Adobe's Help line, or posting the files or whatever. I
can't finish this project and hand off to the client until this is
resolved.
Andrew

Hi,
I'd be reall interested to know if you got anywhere with this as I'm having the same problem.
The article referenced further down this thread is no longer available either.
Any suggestions or advice on this issue would be much appreciated.
Cheers,
Bill

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

How to remove space after paragrph in pages on ipad

Can't figure out how to remove space after each paragraph in Pages for Ipad

Settings > General > International > Region Format
Set it to your country to format numbers and dates in the way your country does.

HELP - iWeb removes pages after successful publish to web

Similar Messages

Maybe you are looking for