HELP,Java Novice,1.5.04 and viewing videos

Hi,
I have got Win 2000/IE6/Java 1.5 installed on several PC's. When trying to view online tutorials which contain video they do not play properly. I receive a blank screen without video showing. When I change the network settings on Java Control Panel from 'Use browser settings' to use direct connection the video plays fine. I have tried 3 PC's, one with XP with this setting and it works fine. However then I changed this setting on 2 other PC's which have WinXP/IE6 but the video shows up but plays really slowly if at all. I've no idea what else I can try to get them to play properly.
Any suggestions appreciated.

You obviously have proxy problems in the computer configurations. This documentation may help:
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/proxie_config.html

Similar Messages

  • Internet access problems and viewing video on internet

    I have very limited interet access most of the time.  I get a message: "You are not currently in an area that can handle data communication.  ..."  I have no problem with email and other features of the phone during this time.  The signal at the top of my phone says "GSM".  When I am able access the internet, it give me a different signal (can't remember what that is, however).  Even then, I cannot view most video clips, such as YouTube clips.  They will not load all the way.  It states, "Error has occurred in attempting to play media."  Help!

    I have unlimited internet access, so that's not the problem.  Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage.  I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home.  I've also been able to view a video clip, not successfully all the way through, however.  During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot.  This has also happened when the phone has not even been being used.   Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did.  Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips? 

  • I lost the ability to download and view video on my mac, how do I restore this functionality?

    I lost the ability to download and view video on my Mac. How do i restore that functionality?

    One of the following steps should help.
    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Restart
    2. Are Plug-ins Enabled?
        Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    Best.

  • I can't import and view videos from a camera.

    I can't import and view videos from a camera.  Even if I open the file and copy the .avi files onto the hard drive.  I have tried iMovie, Quicktime, and Flip player.  Flip player will open it but I only get the audio,  Quicktime freezes, and iPhoto tries to automatically import only to then error saying the files are not compatible.

    Hello Hese,
    try the following:
    1. delete preferences (com.apple.iMovie.plist) and empty the trash
    2. repair disc permissions with Disc Utility and reboot your mac
    3. use Diskwarrior or MacJanitor for disc clean-up
    4. disconnect any other firewire devices
    5. take off any non-system desktop pictures
    If nothing else helps, you might want to consider resetting your Firewire port(s)
    How to reset your Firewire ports:
    http://discussions.apple.com/thread.jspa?messageID=2001817&#2001817
    hope this helps
    mish

  • Installed flash player many times and still unable to play certain games and view videos

    I have troubleshooted and shutdown and restarted after it says it was completed but still unable to view and play.  Please help.  I have Windows 7.
    Was able to play games and view videos a couple of weeks ago.

    Download the offline installer  http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
    Download the Shockwave FULL installer  http://get.adobe.com/shockwave/otherversions/
    Close all browser windows completely
    Uninstall both FlashPlayer AND Shockwave from your Control Panel>Programs and Features>Uninstall a Program
    Run the Shockwave installer
    Run the Flash Player Installer

  • HT204382 i have an OS X Lion and am trying to download a format that allows me to open and view videos in QuiteTime player. Which one would be best for me out of all the options that I have above?

    I have an OS X Lion and am trying to download a format that allows me to open and view QuickTime player.  Which format would be best for me?

    VLC will play any format.
    Quicktime format is MP4.

  • Problems with Lion and Viewing Videos?

    I have a MacBook Pro and since I downloaded Lion yesterday, I can't seem to view any videos on any news sites and YouTube, etc. 
    Is anyone else experiencing this?...and, if so, how can I resolve it? 
    Many thanks!

    False alarm, Lion community.  I finally just resorted to the "tried and true" shutdown and restart....and all seems fine with viewing videos now.
    Thanks anyway! : )

  • Premiere elements 10 and viewing video - avi

    Hi all, I am completely baffled at the moment. I am running 2 systems, both with adobe premiere elements 10 and full content packs. I have also installed k-lite codecs pack on both machine. One is a dell i5 lptop and the other is an i7 tower. I am editing the same set of videos, I have copied a set to my desktop and have another set on my laptop. The issue is this:
    On the laptop I open premiere, get media and select the avi file I want to edit, the file appears and you can see the image of the video file. It is then OK to work from and edit.
    On the desktop, I open premiere, get medi and select the avi file I want to edit, the file appears but this time there is no image just the audio sign. I try to put it intot he video timeline but it only imports the audio.
    I have been stumped all night. Why will it work on one machine and not the desktop?
    Please can someone help me with this?
    Cheers
    Darryl

    1 - you are in the wrong forum, you need to go to
    http://forums.adobe.com/community/premiere_elements
    2 - H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

  • Help with cursor please. . And Syncing Video to Audio.

    Hello, and thanks for reading this. I'm starting with a small project to start learning Premier.
    I've taken about 25 second clips from some songs and mixed them into a 15 minute mix, I would like to incorperate live tour footage of him preforming the song in sync with the songs so that his mouth is moving at the same time and Hand and body movements and such. .
    I'm having a hard time doing this because unlike Adobe Audition when you select a part of the timeline and hit space to play, and then hit space again to pause it and can have the cursor jump back to where it was when you hit play the first time, in Premier when you hit pause it stops where you pause it, and i have to move the timeline, which is very hard to do when I'm zoomed in so far because I need to be presise.
    Is there a better way to do this, or any tips you can provide to help me?
    So far I've added markers to the beginning and end of each song, but it still needs about 3 secs of fine tuning which is proving to be hard when I have to keep zooming out and moving back.
    Thanks so much..

    These are both great help to me, While I would love to continue hearing more tips I do have a question to add which you may know the answer to.
    When using the trim tool   to make a video shorter or longer, because when setting the in and out points i can't make them exact until it's on the timeline, can you shorten or lenghthen it per frame, like when using the alt key to move the video, instead of dragging with the mouse?
    Thanks so much (:

  • Please help.  Exporting 37 minute movie and the video is stuck

    I'm creating my annual year in review trivia contest for a party we're having this weekend. I've done lots of importing, editing, questions, sounds, etc. I exported the video using the "expert" settings, to apple TV. About 8 minutes into it, it locks up on a video clip (i.e. a still frame look) but the audio keeps going as it should. But the video just hangs.
    I'm not sure if this is related, but I was downloading a bunch of stuff off youtube and it was saving in a .flv format. Early on I was converting these to another format to work with the programs. But then I found that the .flv format would import straight into imovie and I could see the clips and edit them just fine. Now I'm wondering if somehow these flv clips are causing a hiccup in the export process?
    I've already edited everything so I'd really like to avoid re-importing these bad clips again. If I have to do that I'll probably throw in the towel as it will be too much work to duplicate.
    Is there a way around this problem?
    Thanks much.

    Beverly,
    Thanks much for the note. I think maybe you were responding to my other post about chapters rather than this post about the video sticking? Not sure.
    Since making this post I experimented with deleting the video file that was the one getting "stuck" on the converted video. Since deleting that video, the movie will publish correctly. So I think I fixed that one. Must have had a corrupt file or something.
    Since that other post about chapter markers I've imported the movie to IDVD, used IDVD to generate a DVD folder, then used handbrake to convert it. That seems to be working though I think there should be a quicker way to do this using only imovie HD.
    Your idea is one I hadn't thought of....regardless of which problem you are addressing (this post about the video being stuck, or my other post about chapter markers), I'm not sure how this resolves either problem though. Sorry if I'm missing the obvious.

  • TA44469 i have a video that plays on my iphone, but when downloaded to windows, only the audio plays and the video is black.  help,

    i have an iphone 4s.  I can take a video and play it on the 4s just fine, i have always been able to down'load to my pc and view videos with no trouble.  But since mid-october 2012, when i download the video to my pc, and try to play it, same as always,  I am getting only audio and the video part is black.  I can hear everything happening, but no picture.  any thoughts?

    Try updating to QuickTime 7.7.3. (That has helped a few people who were getting that when trying to play the videos with version 7.7.2.)

  • I cannot view videos purchased itunes crashes and powers everything down - only happens with itunes - no other videos played or viewed by other sites and methods

    I have tried everything I can think of to fix problems I'm having with using/viewing purchased movies and TV episodes and viewing them in itunes.
    They start to play for only a few minutes - usually choppy and distorted video and sound sync and then the laptop powers down entirely and goes into a loop of inability to start back up normally or through safe mode, etc.
    I have absolutely no other problems watching and viewing videos from other websites orr methods for hours and hours on end.  I've uninstalled and reinstalled itunes numerous times and still have the same issues.
    I'm wondering if there's a Windows setting or preference that is incorrectly causing this problem or if there's an error within itunes itself.
    Any help to correct would be appreciated since I've spent a ton of money purchasing videos I cannot view.

    Try this:
    Plug in your iPod,
    1. Right click My Computer >> Manage and select Device Manager in the left tab.
    2. Click Portable Devices >> right click Apple iPod >> Uninstall
    3. Unplug and plug your iPod, now wait for windows to re recognize your ipod [ In Device Manager, you will see the new recognized Apple Ipod ]
    4. Press F5 to refresh your windows explorer and see if your Apple iPod will show up with a camera icon.
    Otherwise, refer to these articles:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369

  • Cannot view video clips imported from casio s770 on leopard os macbook pro.

    hi
    i've searched the boards for similar problems but can't seem to find the answer. I'm trying to view video clips uploaded from my casio ex s770 digital camera. I was able to do so before upgrading from my ibook g4 to the macbook pro preinstalled with leopard and i life 08. keep in mind i'm using imovie 06 to import and view video clips but all i hear is audio. I tried using quick time to view the video clips and received an error telling me i need to download more components to view the clip, i did so but to no avail.
    somebody please help!

    The file could not be imported: The file “Macintosh HD/Users/riomacbookpro/Movies/iMovie Projects/bobby gets up july 2007” can’t be imported; QuickTime couldn’t parse it: -43
    this is an error message i receive when i try to import old clips from my movie projects..........

  • Problem viewing videos in Safari

    I used to use Chrome all the time but have read using Safari could increase my battery’s life before its next charge. When using chrome and viewing videos in YouTube and Facebook I had no problems but since I started using Safari it has been saying I am missing a plugin. I presume this is Flash player. I am reluctant to download Flash because of possible increased CPU usage and battery drain and all apple aps are designed to use HTML5, so I was wondering if there is another way of allowing videos to play within the webpage?
    Thanks
    Matt

    You're correct to avoid Flash when practical.
    Flash is being phased out by most sites that use it in favor of HTML5 page code. That is sites that rely heavily on video and not the millions of Flash based ads.
    But if the page is coded to use Flash then without the plug-in you can't view it. Doesn't matter how much you don't want Flash to be installed. Many files will not be converted to HTML5 code.

  • View video files in my browser cache

    how do I locate and view video file in my browsers cache? I'm running WinXP and Firefox 9.0.1.
    thanks,
    Steve
    [email protected]

    thanks, I get something like this......
    Information about the Cache Service
    Memory cache device
    Number of entries: 5313
    Maximum storage size: 24576 KiB
    Storage in use: 11379 KiB
    Inactive storage: 11378 KiB
    List Cache Entries
    Disk cache device
    Number of entries: 16022
    Maximum storage size: 819200 KiB
    Storage in use: 387148 KiB
    Cache Directory: C:\Documents and Settings\Steve Langdon\Local Settings\Application Data\Mozilla\Firefox\Profiles\gjjx1ixq.default\Cache
    List Cache Entries
    Offline cache device
    Number of entries: 0
    Maximum storage size: 512000 KiB
    Storage in use: 0 KiB
    Cache Directory: C:\Documents and Settings\Steve Langdon\Local Settings\Application Data\Mozilla\Firefox\Profiles\gjjx1ixq.default\OfflineCache
    but isn't the music and or video I already watched, listened to already on my hard drive??

Maybe you are looking for

  • Please Help Me -- CS4 Design Premium and CS4 Production Premium on Same Machine

    We are a non-profit organization that gets donated software at a great price but you're limited to what's available. We bought the CS4 Design Premium Suite last year (CDs). I called the Adobe sales department to find out if I could run CS4 Design Pre

  • How to connect firmly a 50M-68F convertor to my DAQ card?

    Hello, I am using a 50M-68F (183139B-01) connector to connect my 5B equipment to a MIO-16E4/PCI6023E. This connector is simply plugged into the board (no screw or whatsoever) and I was wondering if there was a better way to tighten this connection to

  • Graphics on some pages all crammed together?

    What is causing this?  It's incredibly frustrating to go to a page and it's a garbled mess like this, any ideas how to fix?

  • BinaryEncoded variable objectGUID  please help

    I have saved the binaryEncoded variable objectGUID  from a  <cfldap result in a Hex format which is a string like so:  EFD456E418BAC6468F6875A136FFE581 its worth noting that toString(binaryDecode('EFD456E418BAC6468F6875A136FFE581','HEX')) gives me ��

  • Leaking G5 with fairy tale ending...

    No wonder Apple consistently scores high on all consumer surveys for customer service! June 2004 Dual 2.5 G5 tower almost one full year out of Applecare warranty. Fans on full bore, shutting down occasionally. I took it to my local Apple specialist f