HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????
HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????
Hi Peter,
Yes I'am in 5.2, I did mention it right after.
This is wonderful Peter, great advice. I got to have my latest version before I created my table of contents.
In Pages > Menu > File > Revert
and see what you get.
Peter
Thank you so much!!
Have a wonderful day
Similar Messages
-
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?
I'm having same problem in develop module which is laggy as hell compared to LR5.8
Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment. -
Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda
I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.
-
Satellite U205-S5034 - Error when trying to create the recovery discs
Hi Everyone,
I am having trouble with The TOSHIBA Recovery Disk Creator. When trying to create the recovery discs this error comes up:
An unexpected error occurred. Please quit this application and restart it. (Error Code: 0F00FE-F1-00000002)
The machine is a Satellite U205-S5034 running XP Pro SP3.
Any help will be greatly appreciated. Thanks and have a great day.
DaveMatt44Hi
What kind of DVDs you are using for creating a Toshiba recovery disc? As yet I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. Friend of tried DVD+R and he couldnt create a recovery disc. After that he tried DVD-R and all was fine but I dont know why this happened.
So please try other discs.
Furthermore check the Toshiba page for a firmware update of CD/DVD drive. Maybe it will help you. -
How can the following error incurred when trying to access the Itunes Store be corrected: an unknown error occurred There was an error in the store. Please try later 0x80092013
Try here > http://support.apple.com/kb/TS3221
And/or... see the More Like This section on the right. -
Just downloaded itunes 11.1 and when i click on the store its a blank screen
I have just downloaded itunes 11.1 and now when I try to open up the itunes store it just comes up blank with nothing showing. No songs or new albums or anything on the itunes store. I have no idea whats wrong and I have tried closing itunes on my computer and restarting it, but nothing has worked....
If you have 10.6.8, make sure you have Safari version 5.1.10. Can be dowloaded here:
http://support.apple.com/kb/DL1569 -
Any thoughts!?
Thanks Knucklesmac!
Not in the dock, not in applications. Search said not anywhere. Not in trash, etc...
I loaded the Safari 4.0.5 but when it mounted and I tried to drag onto the hdd the message said a later version was already installed.
Any suggestions? -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option. -
help i tried to update my itunes last night and it wouldnt update now my itunes wont open it says theres an error so i have tried to download the new itunes and it still says error i dont want to lose what music i already have on my itunes
You're using a Mac computer?
You are always at risk of losing your music. If you are worried about it now too it means you don't have a backup. Get one. Soon. -
Interactive report errors when trying to query external table.
I'm trying to create an interactive report against an external table and getting the following error. I see a note in metalink the describes its cause, but I doesn't seem to apply here.
Query cannot be parsed, please check the syntax of your query. (ORA-06550: line 2, column 17: PLS-00302: component 'ODCIOBJECTLIST' must be declared ORA-06550: line 2, column 13: PL/SQL: Item ignored ORA-06550: line 4, column 18: PLS-00302: component 'ORACLE_LOADER' must be declared ORA-06550: line 4, column 6: PL/SQL: Statement ignored ORA-06550: line 5, column 12: PLS-00320: the declaration of the type of this expression is incomplete or malformed ORA-06550: line 5, column 6: PL/SQL: Statement ignored)
Metalink Note:437896.1 identifies this same error related to external tables. It says the cause is an object named 'sys' that exist in the user's schema and must be removed. I checked dba_objects and there is no object named 'sys'Please ignore thread - operator error. There was an object named sys.
-
ODBC error when trying to create template table
Hi,
I am a new comer to BODS and am facing this basic issue. Every time I try to run the job I get this:
976 3612 CON-120302 12/23/2013 2:48:37 AM ODBC call <SQLDriverConnect> for data source <srvdc344111> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server
976 3612 CON-120302 12/23/2013 2:48:37 AM does not exist or access denied.>. Notify Customer Support.
I can see that the server does have the native client installed and also has the dsn(srvdc344111) is created on the server and client systems(local and system) from where the jobs is initiated. I have checked the two notes but that did not help much: 1514119 1468283
When I try to open a table from the designer using the server name as srvdc344111 I am able to do that successfully.
Would appreciate if someone can shed some light on this please. Is it because I am missing something?
Thanks, all help welcome .
Regards,
ManishHi Arun,
Thanks for all your help. Issue is now resolved.
Basically I have a issue on our network where it was required for the fully qualified domain name to be mentioned in the DataStore as the BODS server itself and the test server with the test DB are on separate domains.
Once I changed the server name to have the fully qualified domain name the connection was successful and the job ran successfully. Thanks again.
Funny thing was, I did not require the FQDN when using it in the DataStore in the designer, and this was because the Citrix server publishing the designer was in the same domain as the test DB server, whereas the BODS server is in a different domain from which it could not reach my test server without using the FQDN.
Hope it makes sense .
Regards,
Manish -
Build error when trying to creat the project from inactive DC..
Hello Experts,
When I am trying to create a project from the inactive DC its giving and error message like build failed.When I switch to webdypro prespective I can see the project created.So please help me out in resolving the issue.
Thanks,
Harish.Hi Harish,
Are you able to see the code and the components in the Webdynpro perspective. You can try the different options like Reload, Repair and Refresh.
See in the log why the build is failing.
Also check this thread:
JDI:Import an existing DC fails BUILD; Used component not found: javaLib
May be it helps.
Regards.
Rajat -
Why compilation error--when trying to access the table from itcsi schema
Hi,
when querying the table from itcsi.app iam able to see the data but used in proc saying invalid table name. Whats the problem
when declared p_app_i_old app.app_i%type----It is throwing pls-00201 error
1 Create or replace procedure Test_insert(p_app_i_old integer,
2 p_app_i_new integer,
3 p_APP_ISAC_CPT_I varchar2)
4 is
5 cursor c1 is
6 select distinct table_name,owner
7 from all_tab_columns
8 where owner = 'ITCSI' and column_name='APP_I';
9 t_tablename varchar2(25);
10 t_string varchar2(300);
11 t_num number;
12 Begin
13 For c2 in c1 loop
14 t_num := 0;
15 t_string := 'SELECT count(*) FROM ' || c2.owner ||'.'||c2.table_name||' WHERE APP_I = '||p_
16 execute immediate t_string into t_num;
17 if t_num > 0 then
18 -- dbms_output.put_line('The table name is '||c1_rec.table_name);
19 if c2.Table_name = 'APP' Then
20 INSERT INTO itcsi.App
21 SELECT p_app_i_new,
22 app_acrnym_c,
23 app_x,
24 app_desc_t,
25 app_ipads_t,
26 app_prdcn_stat_t,
27 app_prdcn_stat_d,
28 app_isd_tier_c,
29 app_bus_cont_c,
30 app_extnl_cstm_c,
31 app-ecrpt_lvl_c,
32 app_isac_cpt_i,
33 dsw_gpn_i,
34 ed_cntnt_srce_t,
35 usr_upd_uunm_i,
36 ed_upd_m
37 FROM itcsi.APP
38 WHERE app_i = p_app_i_old;
39 elsif c2.Table_name = 'APP_CETRN' Then
40 Insert into itcsi.APP_CETRN
41 select p_app_i_new,
42 app_cetrn_i,
43 app-curr_cmplnc_t,
44 app_rqr_cmplnc_t,
45 dsw_gpn_i,
46 ed_cntnt_srce_t,
47 usr_upd_uunm_i,
48 ed_upd_m
49 FROM itcsi.APP_CETRN
50 WHERE app_i = p_app_i_old;
51 elsif c2.Table_name = 'APP_GPC' Then
52 Insert into itcsi.APP_GPC
53 select p_app_i_new,
54 gpc_dpnt_x,
55 gpc_elemy_x,
56 pro_i,
57 dsw_gpn_i,
58 ed_cntnt_srce_t,
59 usr_usr_upd_uunm
60 FROM itcsi.APP_GPC
61 WHERE app_i = p_app_i_old;
62 End if;
63 End if;
64 End loop;
65 --Commit;
66* End;
SQL> /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE TEST_INSERT:
LINE/COL ERROR
20/2 PL/SQL: SQL Statement ignored
37/23 PL/SQL: ORA-00942: table or view does not exist
40/2 PL/SQL: SQL Statement ignored
Thankshow do i check the grant?
if am in my own schema,how do i connect to itcsi
schema?if you are using a schema other than the ITCSI schema, you need to login as ITCSI. or if you have dba user account you can grant a privilege of
GRANT ALL on ITCSI.APPS to <other SCHEMA>; -
Not many details I can add...downloaded the v4 Beta version from your website, tried double-clicking on the downloaded file and got a window that simply said "File is Corrupt". Attempting to re-download now in case the original download was incomplete for some reason. (I am using a slow, hotel internet connection)
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.<br />
Do not forget to re-enable the scanning in your anti-virus software after you are finished with downloading and installing.<br />
* http://kb.mozillazine.org/Unable_to_save_or_download_files
Maybe you are looking for
-
New Development system copy from Production
Hi All, Hope you can help me out here with some ideas. We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, work
-
How do I go to a previous version of Adobe before 11.0.07, I can't print
How do I go to a previous version of Adobe prior to 11.0.07. Since installed I can't print .pdf. I have Adobe XI 11.0.07 and Windows 7 - 64.
-
Hi I have a Form name BPRESTATARIAS with two blocks. A block BUSCAR that has a text item BUSCAR. And another block PRESTATARIAS with origin of data in the table PRESTATARIAS. SQL> desc prestatarias Name Null? Type CODIGO_PRESTATARIA NOT NULL NUMBER(6
-
Retreving the selected substring records from existing records.
Hi all, SQL> select * from temp; C1 C2 1 abcdef 2 efbcda 3 axyz 4 abedcd I would like to retrieve only the records which have substring 'CD' from the available records.. Any help. Regards, ~ sri
-
After 10.5.7, downloaded dmg's can't be emptied from trash
I have noticed since the last update to 10.5.7, whenever I download a dmg, I can't empty it in the trash because it says "file in use." Anyone else see this? It will empty after restart or if I use secure empty trash. I have replicated this on multip