HELP just got an Iphone4
HELP just got an Iphone4 and was trying to sync to Itunes but Itunes said I had an upgrade for the phone which I did, I took ages and now my phone doesnt work just says Emergency calls only and Itunes say error 1621. Anyone help me in simple terms
Try a different cable or USB port. Don't plug into a USB hub.
Try Recovery Mode... http://support.apple.com/kb/HT1808
Similar Messages
-
please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service
Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me. -
hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)
How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad. -
My daughter does not have an iPhone. I just got the IPhone4S. When she receives messages from me they must be downloaded for her to read them. How do I send her plain SMS messages to a non iPhone recipient?
Well, it could have to do with her phone, however does she have any difficulty in receiving SMS from others? You may want to check how you have iMessage set up. Go to Settings>Messages>Receive at>Make sure your telephone number is listed there, then go to Caller ID, and make sure your phone number is the one with the checkmark by it. You may be sending messages with your email address as the header and if that is so, it may be requiring her to download it as data. See if that helps.
-
Help, just got a new hard drive installed and now my videos in iPhoto say, "a necessary data reference could not be found"
Not sure what happened but I was able to click on the movie, go to File then Reveal in Finder, then drag it to my desktop and then drag it back into iPhoto and it worked.
-
I just got my iphone4s and i cant get my pics and music from my memory card from my previous phone
i just got my iphone4s and i cant get my pics and music from my memory card from my previous phone
No need to double post.
https://discussions.apple.com/message/17377280#17377280 -
Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"
Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library -
Just installed IOS 6. Now when I try to check my email on Yahoo I get this error. MFMessageErrorDomain error1032.
Just got this phone, now wishing I had not......HELP!!!!
Read in net to uninstall Yahoo mail and reinstall....DID THAT, still same.Hi there,
Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
Some infos can help you.
Kind regards, -
just got an iphone 4 and the registration page is blank. it also says there is a new version available but says network keeps taking time out
Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie
-
My iPad says
iCloud Backup
This iPad hasn't been backed up in 2 wks, Backups happen when this iPad is plugged in, locked, and connected to WiFi
Then it has a bar with OK in it. I try to click on it, and it does nothing, I try to turn it off it does nothing. PLEASE HELP! I JUST GOT THIS IPAD AND HAVEN'T BEEN ABLE TO USE IT. I don't even remember how it got into what it is in.Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi, I just got the iphone 4 and connected to my computer but i am unable to update to software version 5.0.1. It starts to update but then i get a error message that says my internet connection has timed out but i am still connected? I have rebooted the computer, made sure itunes is updated and am still not able to update. Help
Check for any anti-virus or anti-spyware software you might have. Temporarily disable that to continue. Normally this is what will cause a timeout. I assume you have a good Internet connection?
-
Plz Help, just got a ipod mini...
I did the restore and the update....but now my ipod is doin somethin and says do not disconnect. and its said this for a while. is this normal? how long do i gotta wait? cuz My Computer is showin my ipod, but its not coming up in iTunes.
I too have just bought an i-pod mini and are trying to connect it to a windows based PC.
The PC has recognised the hardware (ie the ipod) and i have installed the software but i can't see the i-pod in i-tunes to transfer my files. the i-pod charged fine through the USB port but i am getting a message from the PC saying a high speed conection is in a non high speed port.
Can anyone help? -
i have an new HP, (nice one) got a new Iphone 4s to replace my 3G. I have icloud on my phones w/ itunes. I just need to I guess pair them all into 1. Only need 1 itune act. But this has been hard for my, and even my children to figure out.
no takers, ill look elsewhere
-
got my iphone5 today and its not letting me text or phone or use the internet on it. is there an amount of time i am meant to leave it until i will be able to use this as a phone!
What did your carrier say when you contacted them about the problem?
-
i bought a movie on itunes from my iphone and now im trying to watch the movie in my mac and its not showing on my purchase list on my mac itunes
anyone can give me a help?Did you purchase the movie or rent it? If you rented it, it cannot be transferred from your iPhone.
If you purchased it, are you sure you're using the same Apple ID on your Mac as you are on your iPhone? If not, you would be trying to watch a movie owned by someone else.
Maybe you are looking for
-
Error message on building application
I'm trying to build an .exe from a folder of VI's that link together, but when I try to build the .exe I get an error message which says 'Error 7 Cannot find Librarian Get Info.vi' I've added this VI to the list of VI's I'm trying to build from and t
-
No access at all to NDS since server crash
last weekend our single server crashed (NW 6.1, SP2). with a nss rebuld Ive fixed the volume problem, the SYS partition is working again. but also the NDS database seems to have crashed. its totally unable to login, even as an admin. ive tried DSREPA
-
Dear All, We are trying to use TAS for existing imeplentation. We are not able to assign load id to Sales Order manually even config settings are done for manual one. Pls. guide whether the process flow is correct for this. Create Load ID --> Assign
-
Windows Installer 3.0 and ZFD 3.2
We just got an application that uses, and requires, Windows Installer 3.0 upon deployment. None of our Windows 2000 or Windows XP computers has that version of installer, yet... What issues are there with installing the installer and this application
-
1 characteristics in different aggregates
Hi, Can someone explain me the following, Say we have a characteristics A, B, C in an infocube, and we have built 3 aggregates on that infocube. 1st Aggregate contains Characteristics A 2nd Aggregate contains Characteristics B 3rd aggregate contains