Help. Just purchased iphone 5 and have spent all evening trying to connect to my home wifi. No luck. Any ideas??
OK. Please someone has to have figured this out by now? I can't do anything with this very expensive paperweight. It won't let me access my wifi, and since i have AT&T, I might as well not have any phone service at all. HELP!!!
If you hate it so much, I suggest you sell it and buy something you like.
iOS: Troubleshooting Wi-Fi networks and connections
Similar Messages
-
I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?
Apps and music aren't part of the backup. App data is http://support.apple.com/kb/HT4946
-
HT4623 just purchased iphone 5 and unable to sync with itunes or icloud- help...
Just purchased iphone 5 and unable to sync with itunes or icloud. when I connect to itunes it says i need itunes 10.7 or later. I've updated itunes and still getting same message. suggestions appreciated
What is your Computer and which operating system is it running...
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)
From Here > http://www.apple.com/iphone/specs.html -
I've just purchased an ipad2 and have synced it with Outlook to get all contacts, etc. I've set up the mail account and it is working just fine. The sync doesn't pull over legacy emails from Outlook and my Outlook has been set up to remove them from the webmail server therefore they aren't available from webmail anymore. Is there anyway to pull them over to the iPad?
But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio -
I just purchased iPhone 5S and I am unable to record my custom greeting. It seems like it is recording but when I tried to play it back it just plays "hello" and that is it.
Hacking an iPhone is against's Apple license agreement for the iPhone and is not supported by Apple directly or indirectly via these discussions not to mention removes the built-in security included with iOS and has likely bricked your iPhone now.
Contact whoever you downloaded that hacking garbage from for help with this. -
I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?
There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers! -
I just purchased the SX60 and have been trying to find the way to change the "startup image".
I just purchased the SX60 and have been trying to find the way to change the "startup image". I have the SX40, Sx30 SX1 and all allow me to change the startup image and the sounds through MyCamera. When I opened MyCamera, it tells me that it won't work on my model. Does anyone know how to change the startup image? In the menu it gives me the choice to either have it on or off. Thanks so much!
Looks like Canon has changed what they ship with the newer cameras. My SX50 came with a disc & no paper manual. Because of that I searched the Canon site (USA site) & found the program set you need to download (according to what it says). Now there are different versions based on your operating system so for my search I've chosen Win 8.0 & the program file recommended is
File Description Date Size
Digital Camera Software 4.3 [Windows]
09/16/14
22.26 MB
File Name: dcsw-4-3-0-2-9l.zi
"A skill is developed through constant practice with a passion to improve, not bought." -
Hello I have just updated my iphone 5 and it keeps requesting 2 old email addresses from I quests my old laptop any idea how to stop this ? Thanks
Log out of the old ID, then login using the new one with the correct pw.
-
Is there software download for net gear PS121 usb print server? Just purchased Macbook pro and have Netgear wireless printer router that has worked well for years on windowns. I have searched with minimal results
Check with NetGear for Mac OS X Lion driver/software.
-
I have a iPhone four and have lost all sound. Could someone plz. Assist me. Thankyou
I have a iPhone four and have lost all sound. Please help.
batemanacres wrote:
I have a iPhone four and have lost all sound. Please help.
Check the Mute Switch on the side.
Refer to the User Guide for Settings > Sounds -
I bought my Macbook Pro OS X Lion 10.7.5 in january 2012 brand new from my local apple store and i am sure they said that it would run AIRPLAY. Having just purchased apple TV and set it all up correctly I still can't connect - no AIRPLAY symbol ? pls help
Mark
You need OS X 10.8 mountain lion, mirror is a feature of that OS and you need to buy it from the app store, OS X 10.7.5 does not do it.
If you don't want to change visit www.airparrot.com a third party app that can do it.
Jules -
I have iphone 4 and have followed all the steps to update and cannot get past "connect to Itunes"
Hey soozeeC
Use iTunes to update it. Download the latest version and install it. Once it is plugged in, it will ask if you want to update your iPhone to iOS 7. If that does not work then click restore.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this problem??
Umm, what problem? What actually happens when you try to restore it in iTunes?
-
i have spent all day trying to set up this phone and i am still not there
my husband called and texted me all day and i can't see or hear
anything at all.
i can't evan get to my icon page and i can't make a callIs this your issue > http://support.apple.com/kb/HT5818
If so...
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Maybe you are looking for
-
My desktop is covered with Adobe Reader icons. Why? How to get rid of them?
For some reason, my desktop recently become infested with Abobe Acrobat icons. I did nothing. one day I turned on my computer and of the maybe 100 icons on my desktop were changed to the Acrobat icons (or at least something that looks very much like
-
Error message when loading FLASH site in ie on PC (swfobject)
Hello...I sudes "swfobject" to embed my Flash site, and have also alt. XHTML content representing the site for non-Flash users and for SEO purposes. Everything loads and wroks just fine from the MAC, but some users (on IE, with PC), are getting the f
-
Iphone will not come up on computer (itunes) when plugged in?
I got my iphone a week ago. I was able to sync my iphone about 3 times with my computer. But now when I plug it into itunes it will stay charging on the iphone itself but NOTHING comes up on itunes. itunes does not pop up itself like it used to. I h
-
I already have itunes installed. If I update itunes, will I have to import all my music again?
-
BPC 7.0 MS upgrade - EVDRE:OK not displaying in templates and reports
Hello again, A strange behaviour in EVDRE templates and reports is noticed: Version - BPC 7.0 MS EVDRE templates and reports (built in 5.1, working fine) are migrated along with the appset in BPC 7.0. Found that the EXPANDALL doesn't work neither sho