Help! Just upgraded to newest version,  and all my playlists gone

Hi there,
I wonder whether anyone might be able to help. I've just upgraded to the latest version of itunes and all my playlists have gone. The music, it seems is all intact, but not in the playlists.
This is hours of work! Is there anything I can do to restore my playlists?
Thanks in advance for any help.
All the best,
Sophie

Same here, I lost all mine as well... this seems to be a common problem, so hopefully Apple will get their butts in gear and fix it.

Similar Messages

  • I just upgraded to mountain lion and all my mail folders for storing all old emails are gone. How do I get them back?

    I just upgraded to mountain lion and all my mail folders for storing all old emails are gone. How do I get them back?

    Buffzap,
    Make sure that you choose Mail>View>Show Mailbox List, then hover your cursor over one of the subordinate mailbox categories, and you should see "Show." Next click on "Show."

  • Please Help: Just upgraded to Xcode 4 and having problems

    Hi folks, I developed a couple of iPhone apps before Xcode 4 was available ( think it was version 3.3.2 ). So I was working on a new app last night with my old Xcode and it was working fine in simulator but I couldn't get my iPhone provisioned because it had an OS that was not supported by that version of Xcode. So I just upgraded to Xcode 4 and now I am having lots of problems.
    1. I cannot build/run the apps I developed in Xcode 3.3.2, any scheme I select results in 'The selected run destination is not valid for this action' - all of the simulator options are grayed out.
    2. The new app builds and runs in simulator but when I try to run it on my provisioned device it says it starts running but then immediately stops running, there are no errors reported that I can find.
    Not sure what to try, any help would be greatly appreciated.
    Thanks,
    Andy

    Quick Update, when I unexpanded the Project on the left-side menu I now see this message when trying to run the app on the provisioned iPhone:
    Target Integrity
    Missing SDK in target projectname
    I understood how to fix this in older Xcode but the new system is foreign to me and I am unclear of what I need to do.
    Thanks,
    Andy

  • Just  installed air port extreme and all phones connect but not my laptop  HELP, just  installed air port extreme and all phones connect but not my laptop  HELP

    just installed airport extreme and all iphones are on and good but not my laptop???????? used the laptop to install the wifi then deleted it from my laptop as soon as i had connection on my phones. plese help!!!!!!!!!!

    Welcome to Apple Discussions, RipapArt!
    Any ideas why this has suddenly happened...
    Possibly a corrupted file. If you have not already done so, you might considered booting you computer from the Tiger Install disk, holding down the "c" key. Select your language and then from the Utilities menu, select Disk Utility.
    In the left pane of Disk Utility, click on your hard disk. In the right pane, click the First Aid tab and then near the bottom click Repair Disk. If any errors are found, it will try to repair them. Re-run repair disk until it reports zero errors. Then click Repair Permissions. Afterwards, reboot the computer normally. Launch Disk Utility from the Utilities folder and Repair Permissions.
    Launch a browser to see if you can get online. If the problem persists, launch System Preferences and then Network. Click Assist me and use the Assistant to create a new location and follow the prompts.
    HTH

  • HELP!!! I just upgraded to 7.6 and all my music is gone!!!

    When I open my itunes I can see all my music but when I try to play a song it tells me
    "The song can not be used because the orignal file could not be found"
    All 40,000 of my songs are gone!!!
    Please help!!!

    Same here, I lost all mine as well... this seems to be a common problem, so hopefully Apple will get their butts in gear and fix it.

  • I just upgraded to Firefox 10 and all my pinned app tabs disappeared. Not sure how to get them back. This did not happened with any previous upgrades.

    Was using Firefox 9 before upgrade.
    Note that I was using Tab Utilities 1.1.2 which is now disabled because it is not compatible with Firefox 10 (but this utility does not really deal with app tabs anyway).

    Please try this: In Firefox, '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Open Containing Folder'''. This opens the [http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]. Copy the '''sessionstore.js''' and '''sessionstore.bak''' files to another place, '''Exit''' Firefox, delete these two files in the profile folder and copy and rename the '''sessionstore.bak''' to '''sessionstore.js''' from the backup to this folder (profile folder). Start Firefox and please also check '''about:sessionrestore'''. Please note that this may not help if the .bak file's size is smaller than the .js.

  • Upgraded to newest version of Firefox all the links were broken, it will not open in Safe Mode or anywhere else-before I uninstall it I'd like to access save my user names and and passwords from websites- can i access them without opening the browser

    i can not launch browser toget version info or anything else, when it upgraded to newest version it stopped working-i've tried launching in Safe Mode and have tried all icons

    You can save a copy of your passwords file, but I don't think you can open it without Firefox.
    Your passwords file is in your profile folder. You might want to make a backup copy of the whole folder. Info on locating the folder: [http://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help].
    You may want to try reinstalling Firefox 3.6. You can download the installer from http://www.mozilla.com/firefox/all-older

  • I've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

    've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and now it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

    You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    You can trash Firefox 4.0 then re-install Firefox 3.6, it will use your existing bookmarks, passwords etc
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • HT4539 I just downloaded the newest version of Itunes and had to deauthorize all of my computers.  I do not see a store menu with drop down, I am stuck and can't see where the authorization is on this software.  It is not in my account and there is no sto

    I just downloaded the newest version of Itunes, I deauthorized all of my computers and now can't find the menu to authorize.  It refers to a store menu that doesn't exist on the new software.  My account allowed me to deauthorize, but has no option to authorize.  I am completely confused with the new software, I just want to download my music to my new computer.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • I just downloaded the newest version of Itunes.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    I just downloaded the newest version of Itunes on my Windows 7 PC.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • I just upgraded to OSX version 10.8.3 and since then all animations are defective. The dock is jerky! The effects of opening and closing windows ranging in shots!  What should I do?

    I just upgraded to OSX version 10.8.3 and since then all animations are defective.
    The dock is jerky!
    The effects of opening and closing windows ranging in shots!
    What should I do?

    You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
    If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
    How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu.

  • HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    Can you tell us about one or more of the video files - what are they?  QuickTime?  MP4?  Something else?  How did you create the video files in the first place?
    I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files!  I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
    The solution was to (re)install QuickTime 7.  But first look in your Applications > Utilities folder.  When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder.  If it's there, try using QT 7 to play one of your video files.    If QT 7 is not there, you can download and install it from here  Make sure you are running at least OS X 10.6.3 before you install QT 7.  It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard.

  • HT204291 I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.

  • I just updated to the newest software and all my apps were deleted.  I have tried syncing on itunes but it doesn't work.  Help!

    I just updated to the newest software and all my apps were deleted.  I have tried syncing on itunes but it doesn't work.  Help!

    Try ReSynching to iTunes.  If you set up sync to the cloud, turn that off, resync to your PC.  That should bring them back.  You can then turn on sync to cloud again. 
    You may, however, want to re-think that.  There is a lot of chatter about the cloud being the source of some if not many of the battery issues.  Personally, I decided to rurn the cloud off until the Battery-gate issue is resolved.
    Good Luck.

  • TS1702 I just updated numbers to newest version and found that numbers quits to home screen when I tap the information icon on "function  help", it starts to load the "help" then quits  this happens on both my ipad3 & iphone5

    2/3/14: I just updated numbers to newest version and found that numbers quits to home screen when I tap the information icon on "function  help", it starts to load the "help" then quits. It happens on both my ipad3 & iphone5. I tried restarting the devices but it didn't help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

Maybe you are looking for

  • CALL METHOD cl_gui_frontend_services= file_save_dialog

    Hi, I want to use 'CALL METHOD cl_gui_frontend_services=>file_save_dialog', to choose a path for saving my txt files.  I only want the user to be able to choose the path and not have to supply a filename aswell.  My filenames are standard in the prog

  • How-to: add spotlight tags when printing to PDF

    Hello, I have an extensive knowledge base of articles that I store in one central folder. I would like to have the option of adding (predefined) spotlight tags in the process of doing this, so as to be able to use smartfolders in my knowlegde base to

  • Adding a screen element in Module pool

    Hi Experts,          How to add a screen element in module pool programming? Thanks, Sudha...........

  • Can't play videos on some web sites.

    Since the last update for Safari I been unable to play videos in some web sites.I checked Safari preferences, under extensions and than list is empty, so I don't have anything that needs updating. Also cleaned cookies, resetted safari, emptied cache

  • Interaction Record History & Notes History

    Hi All - I have a question regarding the Interaction Record history & Notes History assignment blocks in the IR Work Center Page. The IR Work Center page has an assigment block to list the recent interaction records and notes history. However, this c