Help! K7N420 compatible with MS-8894? Crashing!
I just installed my new G4Ti4200-VTD8x onto my K7n420 Pro Mobo. I had no video card installed...using the onboard video. I set the AGP aperture to 128 and booted my XP system. As soon as the destop appeared, it crashed back to reboot. I removed vid card and rebooted and uninstalled the nVidia Geforce display adaptor, as per the instructions for NT installation XP not in manual) to remvove the video card. It boots and then crashes over and over. Will my mother board support this video card? Is there a problem because the mobo is 4x and the card is 8x? Help!
Quote
From another thread started in the MM forum by ivorybow
I just received today by mail order the MS-8894, G4Ti4200-VTD8X. I have spent the last 5 hours uselessly trying to get it installed. All I can believe is that the card is bad. I followed the instructions in the manual best as I could...no instructions are given for the case of installing when you are using the mobo onboard video. I shut down, installed the card and rebooted. When I did the system got in a loop of rebooting and crashing. I finally got it started in safe mode. My onboard G2 nVidia AGP got dropped and the standard VGA drivers had been put in place. XP gave the message, new hardware intalled, referring to the standard VGA drivers. Then when I put the MS-8894 driver CD in, the choice to select drivers to install is not there on the install. Finally I got them off your site and installed them. Rebooted into normal mode and the same thing..a flash of blocks of color and then shut down and reboot. I finally fixted it by removing the new card, zeroing out the CMOS, rebooting, and enabling the onboard G2 video.
XP crashes within 2 minutes of booting with this card in. How can you tell if a card is bad?
K7N420 Pro
AMD Athlon XP 1700
480 Mg Ram
60 Gig HD, IBM
Lite on 32/12/40x CD/RW
56X CD Rom
Allied ATX tower 2509 watts
Windows XP pro
EDIT
I have updated your original post with the additional text from the thread you also started in the MM forum. I have removed that one.
I am moving this one over there as it is more related to the Video card. A link will remain here as well so it will be seen by both forums.
I suggest starting only one thread in the appropriate forum in the future
READ CAREFULLY
Did you move any other PCI cards or anything prior to installing your new card?
You said it wont let you install the drivers, what messages are you getting?
Last ditch efforts:
I just had the same problem installing my TV card a few days ago but safe mode was a no go for me. I had to reload windows but I chose the option to not format and then reinstall in the same c:windows directory. That way I kept all my files. I then backed up my critical files and did a full format and reinstall afterwards.
You may not have to do this if you can get to safe mode.
You can try uninstalling the video drivers from add remove programs. Or Use System Restore to put you back to your last restore point.
I noticed you provided some specs but I have never seen a 2509 watt power supply, I am assuming it is a 250 watt. If that is the case, then it is underpowered for the GF4 and is more than likely contributing to the problem or what caused the installation to fail originally.
You can also wait to see if anyone has any better ideas.
I am short on time and have to go to work and may not be back here till tomorrow.
Similar Messages
-
How to create a help box compatible with reader mobile?
I've imported an excel file into pro and then modified the pdf form. I attempted to create "pop up" help boxes two ways:
1. action button with java script
2. action button with show/hide field
Each time I imported the pdf form into formscentral, downloaded it, emailed it to myself, and then opened it on my mobile device (with adobe reader, not another reader). Neither way recognizes the help boxes.
As I've been reading, it seems like a lot of bells and whistles aren't compatible with reader mobile which is very disappointing. Is there any way to create help boxes that are compatible with reader mobile?Hi;
I think you will get better assistance with this question in the Reader Mobile forums:
iOS: http://forums.adobe.com/community/adobe_reader_forums/ios
Android: http://forums.adobe.com/community/adobe_reader_forums/android
Thanks,
Josh -
I have a K7N420 Pro mb and want to get a good video card for it, I found a msi GeforceFX5600 card and want to know if its compatible. It says agp 8x/4x but I've seen manuals that state theres an agp2.0 4x and an agp3.0 4x (don't know if that's true or not, just seen it), I want to know which one the Msi card supports but havent found then info on any of the websites, if anyone has the info please share.
What you could do is go read up on the specifications of 1.0, 2.0 and 3.0 by going to http://www.google.com and doing a search for each one. Read about it and make your decision based on the specs...
Bonz 8) -
Help! Problem with Sun vm crashing browser
Hi, i've got a live charting applet that updates twice a second and displays stock data to a user. The applet works fine using the Microsoft VM but using the Sun versions it produces a steady slowdown of the computer - windows get really jerky dragging around and when resizing the applet the window takes longer and longer to repaint. Eventually the browser crashes drawing bits of windows all over the place.
There are no memory leaks and the applet drains the same amount of CPU resource as when it starts and, having run profiling tools (jprofiler and optimizeit), i can't find any any other drains.
I've narrowed the problem down to the two methods that paint the chart and all the price ticks, dates etc. around it. These have this basic form:
Graphics g = offScreen.getGraphics();
set clip, fonts etc. do all the painting ...
Graphics g1 = getGraphics();
g1.drawImage(offScreen, 0, 0, this);
g.dispose();
At the moment i'm periodically calling offscreen.flush() and disposing of the created Graphics object (g) each time it's created but this doesn't solve the problem. I also tried recreating the offScreen images every few seconds with no luck.
Does anyone out there have any further sugestions - this is becoming a very frustrating problem! Many thanks.i'm personally using the 1.4.2 version but the problem seems to exist with all the different versions of the sun plugin.
-
hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster..
Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request because the file is not compatible with this version of Photoshop"
Anyway to recover ANY of the file?
Here is the file im having trouble with. You can download it here if you are interested in taking a look: http://portalpacific.net/movieposter.psd
Thanks for any help! Happy New years designers!PortalPacific wrote:
…Here is the file im having trouble with. You can download it here if you are interested in taking a look: …http://portalpacific.net/movieposter.psd
I downloaded it and looked at it. Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
In my experience, if GraphicConverter can't open it, nothing will.
Your file is toast Sorry. -
When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks
Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
tried to create new profile using Terminal but error message. cannot open in safe mode, instructions are only for windows All my bookmarks are in firefox
I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
'''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
'''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
'''''It is definitely a Mozilla FF issue'''''.
Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software. -
Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet. -
i have also tried to uninstall firefox to no avail
when i try to download 3.6.15 it works to 100% then is searching for viruses and there it stops.
i can get on the internet with firefox... but can't get to my email using thunderbird... but i was told the problem is a firefox issue.
yikes. i'm in over my head.I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
'''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
'''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
'''''It is definitely a Mozilla FF issue'''''.
Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software. -
Error: Platform version '25.0' is not compatible with minVersion = 26.0 maxVersion = 26.0 HELP!
Hi All,
I keep getting this error message when opening Firefox on my computer. However, if I run it as an Administrator it works fine. I have uninstalled and reinstalled Firefox including downgrading to older versions and still no luck. This is the Error I get:
Error: Platform version '25.0' is not compatible with minVersion > = 26.0 maxVersion < = 26.0 edit
Any help would be greatly appreciated.If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.<br />
Other security software may have similar features to prevent Firefox from updating files properly.
See these pages for a similar issue with corrupted files:
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 26: http://www.mozilla.org/en-US/firefox/all.html
if possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Help! My display driver is no longer compatible with Adobe software!
Help! I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
I have an early 2008 iMac:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
Serial Number (system): YD*****N4
Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
My display driver:
NVIDIA GeForce 8800 GS:
Chipset Model: NVIDIA GeForce 8800 GS
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0609
Revision ID: 0x00a2
ROM Revision: 3234
Displays:
iMac:
Display Type: LCD
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
<edited by host>If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac. -
My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!
Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud. -
Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.
Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379 -
I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6 please help?
I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6. I have tried to download itunes 10.7 however my macbook is only 10.5.8 so I can't. So now I can't connect my iPhone to my itunes, what should I do?
Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
I hope this will help those whos undergoing this horrifying iPhone problem.
Just additional info.
Issue: Stucked with USB & Itunes Logo during upgrade attempt to iOS 6.0
Iphone 4S (iOS 5.1.1.(9B206)
32 GB
Official Factory Unlock
PC-Win 7 Home Premium 64bit
iREB Download Link:
http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:
Maybe you are looking for
-
How do I seperate myself and 2 teenagers phones and ipads from getting each others texts (icloud)
hi This is all new to me...As a parent,I have my iphone with my account for apple with my email as the main contact address...here's the problem. My two teenagers ALWAYS get or at least can read from their phones/ipads ALL my texts i send/receive and
-
I can't synchronize the movies I bought before, after I upgrade my IPhone ios to 5.1
Hi every body, before releasing ios 5, I bought three movies, The matrix, Matrix reloaded and Matrix revolution, but for several months and after I upgraded my ios to 5 and then to 5.1 I can't access to two of movies I purchased before, even when I s
-
Safari always remembers wrong email address
Once I typed my email address wrong (with a '.' in place of a '-') in a form and since then Safari always auto-completes with the wrong address regardless of how many times I've corrected it. I've tried clearing the cache and also resetting(?) Safari
-
Facebook tab not showen in 24.0 version
Hi we are creative agency and one of our tabs in the Facebook page is not shown on 24.0 Firefox. We try it from some computers and still don't work *work on chrome and explorer https://www.facebook.com/hutzpe/app_208195102528120 Thanks Ofer
-
Why is it that only Flash Player 11 virus's my computer and causes advertisements to play in the background of my computer. I want to be able to play the games I was playing on my computer but unfortunately i need this garbage of a Flash Player progr