HELP!! K8N Neo4/SLI Power Supply problem

Hi. I really need help.
I'm upgrading my computer and using my old case, a raidmax case with a 420w power supply.
The problem is, i discovered that the power supply for the motherboard is only 20 pin, while the motehrboard asks for 24 pin. I discovered that I can fit the 20 pin in theere, but still, 4 pin will be left empty. Is that okay? Or do I need a new power supply.
Thanks!

https://forum-en.msi.com/index.php?topic=85543.msg611646#msg611646

Similar Messages

MSI K8N Neo4 SLI Platinum / HDD_LED Problem

Hello,
First off I would like to say that MSI boards rock! I've always been happy with them, in fact this is my fourth MSI board. The board is K8N Neo4 SLI Platinum.
Unfortunately, I'm having a problem with this one. The problem is minor, but it shouldn't happen, at least I don't think. The problem is that even though the hard drive activity wire is properly connected to HDD_LED, it is not working with my SATA drive. No light at all!
I read in newsgroups that there are people with this same problem (although not necessarily with this same board). I haven't found a solution to this yet. So my inquiry here is:
1. Is there anyone else with this exact board with a SATA drive that can confirm his/her HDD_LED light is also not working with a SATA drive?
2. Does MSI have a fix/solution for this?
Thank you.

Quote from: Jesteronyer6 on 23-July-05, 08:10:26
THere is a positive and negative side on those pins have you tried flipping it over?
This has got to be one of the biggest "pains in the a&&" in setting up a new mobo and connecting it to a new case...

:K8N Neo4 SLI Platinum bios problem

I have a strange problem with this bios, it goes back to default when you shut it down for awhile.
The date goes back to Jan 1 2004 and all settings go to default.
I've changed the battery thinking sure that was the problem, I've heard they've had some problems.
The funny thing is if you shut it down and then restart it it's ok, but if you leave it for awhile it goes
back to default. I flashed to 3.7 bios thought that might do it, but no such luck.
MSI said just get the board or bios serviced, has anyone ever got a new bios chip from MSI?
I'm trying to get this fixed without all the hassle, but it's not looking good.
I like the board everything else has went fine, I guess I could leave it running 24\7's.
When you make changes in the bios all works great, no problems except it won't hold them.
3000 daabp lbble 0521 Thanks for any ideas on this
K8N sli
2x6600gt
2x512 ocz raid silicon
550 antec ps

I checked the sticky's (which I should have done to start with) I see there have been a lot of
problems like this.
Most of the problems have been with the K8N Neo4 Platinum, mine is the sli platinum but the problem
seems the same.
The bios shows the new energizer I put in at 2.86.
I will try to fix this as it was a refurbished board from Newegg.
I tried the cmos button several times and it made no difference, most of the complaints were having
to change batteries every 2 to weeks.
The new battery I put in didn't last the next morning when I booted it up it was right back to default
and didn't even see the raid setup.
It only takes about 1 minute to reset it but thats a pain in the butt, as I said if you just shut it down
for a little while it saves the bios setting's fine.
I like the board, it overclocks fine if you can keep the settings.
I'm going to take the board out where I can get a good look in the batt. holder and see if I can
see anything that might short the batt.
Thanks for the reply and any other suggestions

Help - K8N Neo4 SLI - sound inputs TOO LOUD! (SoundBlaster Live!)

I have two sources for Line In sound; XM Radio and Leadtek TV Tuner Card. In both cases, the sound going from the card is so loud it is distorted even at only 1% of volume on the Soublaster Mixer. This happens whether I plug them into my Line In or Microphone inputs.
Does anyone have any ideas how I can "Tone Down" the signal, so I can turn the sliders up to at least a few percent without it distorting?
Thanks for looking - thanks even more if you respond.

Hi there,
You probably have activate some enhancements in the mixer like 'Mic Boost' or 'Digital Input' those are found in the right side of the mixer they are tick boxes.
Untick them...
Sorrryyyy.....the above is for the ALC 850 chip not for the Creative one....so I'm in the dark, but try to uninstall the drivers and install them again maybe it works.
BTW keep us posted....
Be well....

MSI K8N/Neo4-SLI Cold Boot problem

Sup guys, my system won't restart whenever I crank the HTT to 239+. I heard it has something to do with the nForce4 chipset but I don't know how to fix it. I have the latest BIOS, chipset driver, video drivers, the whole she-bang, but still nothing. I'm currently running my 3000+ Venice @ 2151mHz (239x9) w/ a 4x HyperTransport multiplier (1.450vCore), 512mb x2 Corsair Valueselect @ 166 Mem index (default voltage) 2.5-3-3-8. Thanks.

I used to have corsiar vs and it wont go much higher for you...the stix just crap out after a while. If you want more, you have to go with more expensive mem stix like crucial ballistix or patriot xblk/other tccd mem. Just my 2 cents.

[PT880-Neo LSR]Power supply problem

Hello,
We've installed the new motherboard today, it model is PT880 Neo LSR. Well we've got everything plugged in, but when we try to turn on our computer it doesn't turn on.
There is a case switch, but when turn on, the fans work for like 1 second then it stop.
I've tried the Troubleshooting guide on the website, and studying the Manual, but I could not find a way to fix this.
Can anyone help us fix this power supply problem please?
Thanks

Quote
Originally posted by DarkDuelist
yea, it comes with the 4-pin atx1 connector and 20-pin atx2 connector.
But i just exchanged another mainboard, and still not work. the first time i test it, i only plug the 4-pin and 20-pin connector into the mainboard and it worked. i thought the problem was solved. so i put everything else in (cpu, hdd, cd-rom, dvd-rom...) then test it again. I only heard a sound psssst, and nothing run. I tested it many time and it still not work. Then I UNPLUG the 4-pin connector from the power supply to the mainboard, and test again, this time, only all the fan RUN except the the fan in the power supply DID NOT run. Is it because that the power supply got problem? I used another power supply 420w to test but nothing run either.
MATSONIC motherboard MS9087C
DDR 400
Intel celeron 2gh 400 fsb
Macron 350w power supply
The psssst sound----sounds like something shorted out. Pull everything out and put it back in with a different PSU.
Don't put a hard drive or floppy in-----just CPU, RAM mobo, vid card, fans, PSU-----see if it will post.

HELP! K8N NEO4 SLI - SOUND PROBLEMS WITH INSPIRE 7.1

People, i bought K8N NEO4 SLI, and i'm having problems with my Creative Inspire 7.1. I have certain that everything is connected in a correct way, drivers ok, but the side surround speakers doen't make no noise. Creative media is set to 7.1 channels and the speakers too...
I'm thinking that the onboard audio is a bul....
Can someone help me with this? Who here has the same kit as me?
Thanks a lot
Edinho
(brazilian guy)

Man, i'm using those standart cables offered with the product....i thing its analog, i don't know certain...
i'm very about this onboard sound...
and the worst thing, i'vc contacted creative for explanation about it and they answer me that they could'nt help, cause it's a OEM product...no response about it, have to contact MSI..
here in brazil, it's real difficult, cause anoyone cares about it...
i have absolut certain that software and hardware configuration/instalation is ok...cause i had those speakers in other PC...
i've already head tons of audio-problem topics here, and i say: K8N N4 SLI Integrated Sound is a bul...

K8N Neo4 SLI Onboard Creative Audio Problem

I'm using a K8N Neo4 SLI board with the CA something Creative Audio chip onboard. After a cold boot, the audio is alright but after a period of time, I begin to lose power in my left speaker for some reason . This has been confirmed to be a problem pertaining to my mobo, and not my speakers. Any suggestions?

Tried to used driver cleaner to clean all the Creatives drivers then used the drivers provided from the CD or used the latest drivers. If still cannot then configured from Control panel on the speaker or Sound Manager itself. Gd luck.

System Hangs when playing games -K8N Neo4 - SLI Plat

Hi,
This is my first post..........so bear with me. I've just completed my sons new computer, all was fine until he started to play games!!!.
The system is,
Floopy = Mitsumi
DVDR = LG
CDR = LG
Memory = 2 sticks of Samsung 512 PC3200 DDR400
Graphics Card = MSI 6600GT 128
Motherboard = MSI K8N Neo 4 SLI
Power Supply = Ebuyer 600 put using a 20-24pin connector
Monitor = Samsung 19" Flat
Hard drive = Samsung SP200c 200GB
Windows XP with service packs one and two
I have tried changing the DVD,CDR,Memory,hard drive but the porblem still presists. This is my 8th computer build no problems until NOW, this has got me beat.
We all you guys out there can you please help me resolve this problem, it was a birthday present to my son...........some pesent
Helps for your help in advance

Quote from: ade cab on 05-November-05, 17:52:35
Hi,
This is my first post..........so bear with me. I've just completed my sons new computer, all was fine until he started to play games!!!.
The system is,
Floopy = Mitsumi
DVDR = LG
CDR = LG
Memory = 2 sticks of Samsung 512 PC3200 DDR400
Graphics Card = MSI 6600GT 128
Motherboard = MSI K8N Neo 4 SLI
Power Supply = Ebuyer 600 put using a 20-24pin connector
Monitor = Samsung 19" Flat
Hard drive = Samsung SP200c 200GB
Windows XP with service packs one and two
I have tried changing the DVD,CDR,Memory,hard drive but the porblem still presists. This is my 8th computer build no problems until NOW, this has got me beat.
We all you guys out there can you please help me resolve this problem, it was a birthday present to my son...........some pesent
Helps for your help in advance
What's your CPU? Do you overclock it? I had a 430w-Thermaltake PSU shipped by the manufacturer with my computer. I experienced mysterious problems. I got help from this forum, replaced that 430w PSU with a Tagan and my computer has been running reliably since. Some reviews on newegg.com said about that 430w PSU "more than enough for my power rig blah blah blah..." Maybe with stock speed.

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

Power supply problem a little better after unplugging imac for 24 hours

Hello,
I'm currently having power supply problems (at least I hope it's the power supply and not the mother board), similar to many others I've seen on these boards. What I've noticed is that if I unplug my iMac for about 24 hours I can get it to run again for a little while. Unplugging it for a few minutes (or even 8 hours) doesn't seem to help. My iMac won't get much further than the starting chime before it loses power. But it seems to me that unplugging it for 24 hours has gotten me between 5 days to 5 hours of use before I unexpectedly lose power.
Is there anything to account for this or am I just imagining things? Ultimately, I don't think the answer will help me much, but I am curious to know. I'm taking my iMac to a Mac Genius tomorrow to see if they can help diagnose the problem. I saw a little hit in my video today, which was a first, so I suspect the problem may be getting worse. I'll probably be buying a new power supply soon.

I'm having the same problem. They say to restart you have to unplug the power, wait 10 seconds and then plug it back in but apparently it's not enough. I have to unplug for about 30 seconds, plug back in, and wait anywhere from 30 minutes to several hours before it'll start up again properly. The last time I had this issue was in october '06- when I had a new logic board and power supply put in. Now I'm worried because my applecare is expired by about 3 months. I bought the computer in feb. '05. I hope a new board doesn't cost more than what the computer itself is worth but I'm afraid that'll be the case...

K8N Neo4/SLI Bios Update for a Newbie

This is the first MSI motherboard that I've bought and I love it. I've been wanting to upgrade to the latest bios, but I'm not entirely sure which one to get. I have the MSI K8N Neo4/SLI board, but when I go to the downloads section to get my bios update, I don't see my motherboard listed. I only see K8N Dimamond, K8N Platnium, and K8N SLI. http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php?kind=1&CHIP=Socket%20939%20(AMD%20K8)&ID=2 Which one of these would work on my motherboard, or would none work? If none of these work, where can I find one that will work?
Also, how is this bios update applied? Is it applied in Windows or through a floppy disk? Are there any recommendations over one or the other?
Any help in the matter is greatly appreciated. Thanks!

If you fill out your specs in your sig, we can see what you have. You'll probably find your board at the US site here
Also, no need to risk disaster in a bios flash if all is well. There are many stickys on this site re: flashing. It probably needs to be trimmed up a bit .
There are three ways to flash the bios. One is somewhat risky (floppy), another safe (ramdrive), and the last can be unpredictable (LiveUpdate).
I highly recommend the ramdrive or ntfs method as described here
EDIT: another good item to have on hand before you try this is the BIOS SAVIOR
This model fits my nf4 board

NOT Stable overclock on K8N Neo4 SLI Platinum 3.9 MOD + Venice 3000+

Hi, to all the people that make this forum so usefull.
I´m wondering what i´m doing wrong? ??? ??? ???
I have a Venice 3000+ E3 on a K8N Neo4 SLI Platinum and 1 Gb OCZ Rev2, TCCD.
I have overclocked the CPU to 9 x 290 Mhz (2610Mhz) HTT 3X, MEM 1:1 290Mhz 2.5-4-3-10 1T 2.75V.
Memory is ok at this setting on MEMTEST v1.65.
I have tried Every VCORE possible to the CPU and Nforce Chipset and can´t make it stable.
I can work on windows with this settings but some times the computer locks. >:(
If any of you in the forum have a suggestion or recomendation, please Let me Know.
For a list of complete hardware of my rig, look at the signature.
Thank for all.

I had this exact same problem, same RAM, same MOBO, with an X2 3800+.
For some reason it wouldnt overclock 1:1, and that RAM at wouldnt run at 2.5-x-x-x-1T timings (and i dont think it did 2T stable for too long either). So i was limited to either 2 or 3.
So right now I'm running my X2 at 2.55ghz and my OCZ Platinum 1gb TCCD @ 232(2-3-3-6-1T). Done so by using 183 divider at 255fsb. HTTmulti=3x
Does dual prime 95 for 10-12 hours (havnt tried for longer)
Oh also, for voltage, the RAM has 2.80-2.85, and NF4 gets 1.55-1.60v.

K8N Neo4/SLi - Keeps detecting Raid at bootup

Hello everyone,
My K8N Neo4/Sli non platinum board keeps detecting IDE raid at bootup. Am I supposed to load the raid drivers on the floppy even though I don't have it enabled in the bios? That may be a separate question but curious. At this point it's more of a 10-15 second annoyance. My machine radomly freezes in windows xp too. Not sure if it's related.
Thank you to anyone that can help or has ideas.
Setup:
3500+
7800gtx msi
samsung sata 7800 160g drive on first sata
Maxtor ide on 1st IDE
2 opticals on 2nd IDE
1 gig corsair xms platinum

Quote from: SAB on 02-August-05, 17:19:32
LOL...or sometimes when O.C.'ing the CPU...SATA devices decide to take a vacation!!!!
i don't have any SATA devices on my machine, but i still couldn't figure out why after i stoped using RAID and wanted to switch to a 2X160 GB non-RAID config, after BIOS post the screen would hang at detecting NV raid. took me 3 hours to find out that if the optimized settings were loaded, the trick would be to disable the aggresive memory timings from the cell menu. strangely enough, it worked with aggresive timings and the BIOS i had when i got the mobo (it didn't hang at detecting and configuring raid) but not with the new ones. and this was without any OC.

Replacing Power Supply Problems

Apple Care had kindly sent me a new power supply. It is a self servicing part, i.e. I have to install it myself. Tried for 2 hours yesterday to get the old one out...didn't work.
The problems:
1. Middle screw on back of power supply does not get loose [the screw close to the power cord connector]. I tried to pull the power supply up while loosening screw...no success. Did anybody run in the same problem...how did you get this screw unstuck?
2. Middle case screw [the one at the bottom of the computer] needs to be turned to the right...which is in contradiction to the downloadable manual...but the front ot the screw still touches the power supply...and possibly holds it in.
How easy should the power supply come out...how much force can I apply without breaking the computer's case?
3. Ambient light sensor connector: comes as separate cable. Since I have not gotten the old power supply out, I do not know how to connect the cable to the new one. There does not appear to be a designated hole on the power supply.
Experiences welcome!
Thanks
Jurgen

hi Jurgen.... i just get a new imac g5 and it presents power supply problems the very first day they bring it... so the retalier took it for a repair..i been wating for two months and no sings of a solution... i am looking for help but i can't reach anyone at apple .... so i need some tips here... what should i do?? i tried the chat agent but they are closed..and the retailer refuse tho give enough info to check out about the repair status..they keep saying that the frabric respond very slow and then that the new part they recieved from apple was defectous... well.. if anyone can give me some tip would be very nice and usefull.. i really don,t now what to do... some email to inform apple the situation ?.... thanks for read this... Fernando

HELP!! K8N Neo4/SLI Power Supply problem

Similar Messages

Maybe you are looking for