Help k9n neo

hi, i built a computer and once everything is plugged in and turned on, there is no signal to the moniter so i cant even access bios. Help much appreciated.
Current System Spec:
AMD Athlon 64 3500+ Orleans 2000MHz HT 512KB L2 Cache Socket AM2 Processor
MSI K9N Neo-F Socket AM2 NVIDIA nForce 550 MCP ATX AMD Motherboard
HITACHI Deskstar 7K80 HDS728080PLA380 (0A30356) 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
BenQ Black 52X CD-R 32X CD-RW 52X CD-ROM 2M Cache E-IDE/ATAPI CD Burner
PNY VCG7600GXPB Geforce 7600GT 256MB 128-bit GDDR3 PCI Express x16 Video Card
mushkin Green 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory
Antec SmartPower 2.0 SP-500 ATX12V 500W Power Supply 115/230 V TUV, UL, CUL, CE, CB, FCC
I have tried stripping it down to just the just the essential parts to see if i could get to the bios but it didn't work. I then tried to replace the graphics card with my friends to see if my gfx was dead and even with his gfx, there was still no signal. Finally I tried to remove everything and put it back together with no avail.

Quote from: zvam on 02-August-06, 22:42:20
If you look on the MSI site, it gives you a list of compatable rams. Heres the list if your lazy.
Buffalo
Crucial
Corsair
Kingston
Mushkin
OCZ Technology
Princeton Technology
Super Talent
have been there that is how i found out that the kingston modules are non ecc. I have enoted ebuyer.co.uk to see if they can give me more info on the memory i have bought. The pc world memory module description doesn't tell me what it is just that it is a ddr2 533mhz 256mb memory module
wednesday 2nd august 19:20
have just purchased and installed a 256mb 533 ddr2 memory module.
19:35
cheap module from pc world has allowed me to get post. now need to update bios to recognise the 2gb i have
Thursday 3rd August
Now have a computer that recognises the 2gb Ebuyer.co.uk memory that i originally purchased. Managed to use the 256mb from PC World to boot the machine and install windows to upgrade the bios. My mum now has a fully working PC even with the original 350w PSU that was supplied with the case.
If anyone is still having problems with this motherboard then pop down to your nearest PC World and purchase a cheap 256mb 533 ddr2 memory chip and use that it works. Make sure it is from the component store

Similar Messages

Black screen after BIOS update on K9N Neo V2, help pls?

Hi guys!
I have K9N Neo V2 motherboard and Athlon X2 5400, I've decided to upgrade and bought Phenom x4 9750.
So I've updated the bios to 3.0O from https://forum-en.msi.com/index.php?topic=124305.0 using the instruction, it went fine, I've been using it for a week but found out some bugs (windows blue screen and applications and OS hangups), then I got to restore OS from acronis true image - failed. And then I decided to check if the new bios supports my old athlon or not, I've changed the CPU and started - failed, dark screen no bios, I plugged back Phenom and now it also is not working :((. Have no idea why and what to do now..
Would really appreciate any suggestions and help.
Thank you in advance

Quote from: Svet on 19-August-13, 22:20:56
you can do >>Clear CMOS Guide<< with power cord removed and try to boot with 1 memory stick only in 1st DIMM near to CPU slot
Thank you, I'll give a try and post the results, thanks!

Need help with K9N NEO V3

I need a help and advice. I use before on my board one ram memory stick 2 gb and now buy another but they don`t wana work together. I have only 3.25 gb of memory in work and sometimes problem with starting computer.
Motherboar model name: MSI K9N Neo V3
model number: MS - 7369
Ami Bios: A7369NNS V2.4 112007
RAM: sitck i use before: KINGSTON, KHX6400D2/2G, HYPER - X
this one i buy now: TRANSCEND, 2G DDR 2 800 DIMM, 530811-3606 RoHs
CPU: Amd Athlon(tm) 64 X2 Dyal Core Processor 5000+
Memory Freqency for DDR3 667 (dual-channel)

Check this link: https://forum-en.msi.com/index.php?topic=108883.0

K9N Neo-F Freeze and restart problem. Help needed!

Hi there,
I recently bought a Mainboard (K9N Neo-F S/N: 601-7260-010K0605023133) that seems to shutdown every now and then. No blue screen... it just freezes for a while and then shuts down. My CPU temperature is very low, I've used a lot of coolingpaste and I have tried every possible way of mounting memorys... 1,2,4... and in different slots. I've run Memtest also. The BIOS-version is the newest according to the Liveupdate-function. The power supply should be enough but I have tested disconnecting everything else then one harddrive and the mobo... doesn't work.
Sometimes it happens with three hours between the occations and sometimes five minutes. Not related to anything special that is done on the computer.
Is this a problem that is common...? Related to hardware or bios...? I would be glad for any advice you could give.
Thanks in advance. Really need help... this drives me mad...
/Christian

I started Orthos and then left the computer alone. Went and watched a film, when I got back after 1 hour and 38 minutes or something like that the computer freezed. I will try leaving it on all night without touching a thing... kind of strange that it happens right when I sit down and move the mouse.
Thanks a lot for trying to help... it's appreciated.
Here's the log:
Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15
CPU: 2211MHz FSB: 200MHz [201MHz x 11.0 est.]
CPU: 2211MHz FSB: 0MHz [0MHz x 0.0 est.]
2006-10-16 21:23
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
1:Beginning a continuous self-test to check your computer.
2:Beginning a continuous self-test to check your computer.
1:Press Stop to end this test.
2:Press Stop to end this test.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
2:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
1:Self-test 1024K passed!
1:Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
2:Self-test 1024K passed!
2:Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
1:Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
2:Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
1:Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
2:Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
1:Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length.
2:Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length.
1:Self-test 896K passed!
1:Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
2:Self-test 896K passed!
2:Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
1:Test 2, 5300 Lucas-Lehmer iterations of M14942207 using 768K FFT length.
2:Test 2, 5300 Lucas-Lehmer iterations of M14942207 using 768K FFT length.
1:Test 3, 5300 Lucas-Lehmer iterations of M14155777 using 768K FFT length.
2:Test 3, 5300 Lucas-Lehmer iterations of M14155777 using 768K FFT length.
1:Test 4, 5300 Lucas-Lehmer iterations of M14155775 using 768K FFT length.
2:Test 4, 5300 Lucas-Lehmer iterations of M14155775 using 768K FFT length.
1:Self-test 768K passed!
1:Test 1, 6500 Lucas-Lehmer iterations of M12451841 using 640K FFT length.
2:Self-test 768K passed!
2:Test 1, 6500 Lucas-Lehmer iterations of M12451841 using 640K FFT length.
1:Test 2, 6500 Lucas-Lehmer iterations of M12451839 using 640K FFT length.
2:Test 2, 6500 Lucas-Lehmer iterations of M12451839 using 640K FFT length.
1:Test 3, 6500 Lucas-Lehmer iterations of M12196481 using 640K FFT length.
2:Test 3, 6500 Lucas-Lehmer iterations of M12196481 using 640K FFT length.
2:Test 4, 6500 Lucas-Lehmer iterations of M11796481 using 640K FFT length.
1:Test 4, 6500 Lucas-Lehmer iterations of M11796481 using 640K FFT length.
1:Test 5, 6500 Lucas-Lehmer iterations of M11796479 using 640K FFT length.
2:Test 5, 6500 Lucas-Lehmer iterations of M11796479 using 640K FFT length.
1:Self-test 640K passed!
1:Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512K FFT length.
2:Self-test 640K passed!
2:Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512K FFT length.
1:Test 2, 7800 Lucas-Lehmer iterations of M9961471 using 512K FFT length.
2:Test 2, 7800 Lucas-Lehmer iterations of M9961471 using 512K FFT length.
1:Test 3, 7800 Lucas-Lehmer iterations of M9837183 using 512K FFT length.
2:Test 3, 7800 Lucas-Lehmer iterations of M9837183 using 512K FFT length.
1:Test 4, 7800 Lucas-Lehmer iterations of M9737185 using 512K FFT length.
2:Test 4, 7800 Lucas-Lehmer iterations of M9737185 using 512K FFT length.
1:Test 5, 7800 Lucas-Lehmer iterations of M9537183 using 512K FFT length.
2:Test 5, 7800 Lucas-Lehmer iterations of M9537183 using 512K FFT length.
1:Self-test 512K passed!
1:Test 1, 9000 Lucas-Lehmer iterations of M8716289 using 448K FFT length.
2:Self-test 512K passed!
2:Test 1, 9000 Lucas-Lehmer iterations of M8716289 using 448K FFT length.
1:Test 2, 9000 Lucas-Lehmer iterations of M8716287 using 448K FFT length.
2:Test 2, 9000 Lucas-Lehmer iterations of M8716287 using 448K FFT length.
1:Test 3, 9000 Lucas-Lehmer iterations of M8516289 using 448K FFT length.
2:Test 3, 9000 Lucas-Lehmer iterations of M8516289 using 448K FFT length.
1:Test 4, 9000 Lucas-Lehmer iterations of M8316287 using 448K FFT length.
2:Test 4, 9000 Lucas-Lehmer iterations of M8316287 using 448K FFT length.

K9N Neo V3 and SATA DVD-RW, need help

Hi all!
I've got a K9N Neo V3 mainboard and a Pioneer DVR-215BK DVD-RW (which is a Serial ATA drive). The problem is, when attempting to read any disc (CD or DVD), the drive recognizes it OK - but then hangs the very moment data transfer begins, then after 3-4 attempts (i.e. read-hang-read-hang etc) starts reading, but transfer mode is set to PIO by the OS (I have Windows XP SP2 installed). I can change it back to UDMA 4, but when I load a disc the whole story repeats :( . Reading speed in this mode is not too impressive, of course.
I have upgraded mainboard's BIOS and the writer's firmware to the latest versions; tried NVidia IDE SW drivers; checked the RAM for errors; connected the writer to different SATA ports with different cables; changed RAID mode in BIOS setup - and, of course, surfed the web searching for the solution - and now I'm here... Seems like few people had quite the same problem, but I've tried what they were proposing (even disabling error control for the corresponding IDE channel in Windows registry) - with no result at all.
Here's what I have inside my PC case:
MB and DVD-RW - you already know; RAM: KingMax 2*1024 Mb 800 MHz; HDD: Seagate Barracuda 7200.10 (SATA); Graphics: NVidia 8800 GS; Sound: Creative X-Fi Xtreme Audio; PSU: Delta 500W.
Note: SATA HDD works fine in UDMA 6 mode, without any errors. Any other piece of hardware I have also operates fine...
Hope anyone can tell me what causes this issue and what I can do about it. Is it my DVD-RW or motherboard that's faulty, or some compatibility issue, or I'm just stupid ? Thanks in advance.

Quote from: Nestemat on 28-March-08, 05:11:31
The burner is not the issue , the issue is the motherboard or some simple bios settings or the bios itself .I have a K9n Neo v2 mcp 520 and it has the same problem dvd-rw under pio , i think the problem is caused by the drivers , because they just won't install
Well, that's at least something! Means I'm not alone.
Yesterday I cleaned up whatever was remaining that could have caused the issue: removed everything but vital components; uninstalled all programs that might use additional drivers (like Nero, WinCinema and such); had the RAM checked again by MemTest86+ 2.01. Well, nothing changed, of course.
Tomorrow I'm taking the system to the dealer I've bought it from (that's gonna be a challenge, we got a lot of snow here ) - we'll see what the service personnel has to tell me.
I will let you know as soon as the problem is solved.
Nestemat
In your case - what's the brand and model of your DVD-RW? Have you tried downloading the latest drivers - or maybe your installation CD is bad or a buggy installer? Try installing the drivers manually.

Plz help: Don't know if I have a K9N Neo V2 or V3.. want to upgrade proc

Hello,
I actually have a two-part question:
First, according to my POST I'm running the a7369nms bios (v2.4), and thereby I have determined that I'm running either a K9N Neo V2 or V3. Unfortunately, I don't have the box and instructions anymore and I can't seem to remember which it is. Is there any way I can determine which one I have?
Second, I would like to upgrade my processor. I'm currently running an X2 4200+, and would like to upgrade if possible to a Phenom X3 720 BE. Is this possible?
Thanks so much for your time.
Best,
Nick

Quote from: Henry on 19-January-10, 06:31:36
What you call a Phenom x3 720 is really a Phenom II X3 720 (AM3) so no way in the world would it work. You're lucky the listed Phenoms (AM2+) will work as it is.
I have a sneaky feeling that Fredrik is just funning with you.
Yes, I failed to make that distinction. Though I knew they were different sockets, I thought they were theoretically compatible if the bios supported the cpu and the thermal power design rating was sufficient. Hmm... so which would you learned gentlemen/women agree that the fastest cpu I could bolt on to my board would be? A 95W phenom x3 8750, x4 9750 (if I can find a 95W one), or an athlon x2 6000+?
Thanks again for all your advices.
Nick

MOVED: HELP!!! K9N Neo-F don´t starts(wrong Bios)

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=104615.0

Quote from: nascarbr on 18-January-07, 21:35:13
Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?
"Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F."
why you did that? re-update BIOS with correct version for your board:
http://download.msi.com.tw/support/bos_exe/mbd_bios/7260v15.zip

MOVED: Help to clock my athlon 3000+ (orleans) on K9N-neo-F

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=102485.0

ok here are ther
BIOS v1.4 AMI
Mother board K9N neo -F
AMD am2 3000+@2,1ghz on fs 240
ddr2 corsair value select 667mhz 1 gb 2T timing are on auto and memory hole is eneble (can somebody tell me hat is this)
ddr2 voltage 1.90
HT transfer rate is on 800
and 16 to 16 on

K9n neo stability problems, computer freezes hd light stays on! help!

Newly built system having stability problems. The computer crashes when loading and exiting programs, seams to me like it is ram related. When the system crashes the hard drive light remains lit. I have an elixer 667mhz ram module. Heres the system spec:
msi K9n neo
athlon 3500 am2
elixer 667mhz ram
gforce 7300le
sata mextor 80gb
350w power supply
I am unsure of the ram timing setting and voltage, i just set them to auto please can someone tell me what could be wrong is elixer compatible with this mobo?
thanks

There is appearently a compability problem with the AM2 K9N boards and
nvidia 7300 turbocache gfx cards (turbocache use system memory as added VGA mem)
See:
https://forum-en.msi.com/index.php?topic=99557

HELP!!! K9N Neo-F don´t starts(wrong Bios)

Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?

Quote from: nascarbr on 18-January-07, 21:35:13
Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?
"Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F."
why you did that? re-update BIOS with correct version for your board:
http://download.msi.com.tw/support/bos_exe/mbd_bios/7260v15.zip

MSI K9N NEO (PCB 2.0) Help

MSI K9N NEO (PCB 2.0)
Problem with front audio connectors, In my atx i have this cords listed below..
MIC-IN
MIC-BIAS
SPKOUT R
RETURN R
SPKOUT L
RETURN L
GND
In the manual describing the JAUD1 Front Audio Connector it lists:
1. AUD_MIC
2. AUD_GND
3. AUD_MIC_BIAS
4. AUD_VCC
5. AUD_FPOUT_R
6. AUD_RET_R
7. HP_ON
8. KEY
9. AUD_FPOUT_L
10. AUD_RET_L
Guide me pls where should i put this cords because i only got 7 cords.
TNX IN ADVANCE

Your case connectors are not complient with the HD Audio connectivity standard. In order to make this work, you'll need to disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager.
Connecting your case's ports should be rather either:
First of all:
GND ---> 2. AUD_GND
Then the microphone:
MIC-IN
MIC-BIAS
There are only two possible ways to connect these plugs to:
1. AUD_MIC
3. AUD_MIC_BIAS
Try both ways. One of them is going to work. [Remember: In order to make this work, you'll need to disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager.]
And then the other thing:
SPKOUT R ---> 5. AUD_FPOUT_R
RETURN R ---> 6. AUD_RET_R
Same thing for the left channel. Just this time use:
9. AUD_FPOUT_L
10. AUD_RET_L

K9N Neo-F and AMD Athlon X2 AM2 6000+ (125W)

Hi Everyone!
I want to upgrade my PC, now I have:
MSI K9N Neo-F motherboard
S/N: 601-7260-010K0609058577
MS-7260 ver. 1.0 K9N Neo nForce 550, AMD AM2
CPU: AMD Athlon X2 AM2 3800+
RAM: GoodRam 2x512MB (667) and 2x1GB (667)
GPU: Zotac GF 8800GT
Now I want to buy:
CPU: AMD Athlon X2 AM2 6000+ (125W)
RAM: GeIL 2x2GB (800) Black Dragon II
My question is: can I use this new CPU on old motherboard?
Have anyone similiar configuration?
In this topic: https://forum-en.msi.com/index.php?topic=108896.0 someone has the same motherboard and CPU, but talking abolut PSU...
Waiting for help :-)

Quote from: Arcur on 04-June-08, 03:59:54
I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support?
If you dont care about a future quadcores upgrade you can buy a old AM2 board, but dont forgot to look at the cpu support list, because the most AM2 boards doesnt support 125watt either. ???
"I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support? "
That is not true, 125W support usually have high end mainboards.
"I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. "
Here are they:
K9N2 SLI Platinum/K9N2 Zilent ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1443&maincat_no=1&cat2_no=171
K9N2 Diamond ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1438&maincat_no=1&cat2_no=171
AM2+ Nvidia chipset boards, not only support 125W, but support 140W CPU too.

MSI K9N NEO-F V3 Cannot install Windows 7

I am trying to install Windows 7 Professional 64 bit on my wife's desktop computer.
The system is:
MSI K9N NEO-F V3 Motherboard with BIOS American Megatrends Inc. V2.4
AMD 64 X2 3.00 Gigahertz
2 Gigs of RAM
Windows XP Pro 32 bit
500 gigs SATA HDD
120 gig and 40 gig IDE HDDs
As it has to be a clean install, I start the computer with the Windows 7 in the DVD drive. I get loading files, Starting Widows and then the background picture (picture with vapour trails, a dove and some grass) for the "Select Language etc." screen. Then nothing, no matter how long I leave it.
Got onto Microsoft and spent 1.5 hours trying to get it to work. We even went into the BIOS, made sure the DVD drive was the first boot device. When I clicked F10 to save and exit I did not get the "Press any key to boot from the CD/DVD", it went back to the beginning of booting.
The disk is OK, it is a Microsoft disk and worked fine when I tested it in my PC.
Can anyone help, please?

Disconnect the two PATA hard drives.
Make sure the hard drive you're installing Windows on is formatted before running the setup.

No video on new build K9N NEO V3

Hello all,
New build turns on, no beeps and of course no video. Stays running when is turned on just no video. All fans working (CPU, case, power, and video fans). Have tried detaching the mother board and tested with two video cards (one video card per test) and one stick of memory. Used a CRT monitor and a LCD monitor.
Here are the numbers:
msi k9n neo v3
amd athlon 64 x2 5000+ black edition
chaintech geforce 7300gt (tried other pci video card, pulled from working system)
crucial 2-1GB 6400
power supply:
dc output: 3.3v / 5v 12v--12v 5v / -12v / 5vsb
max output current: 12a / 46a 26a--26a .5a / .8a / 3.0a
32a
max combined: 230w 384w 25w
Let me know if more info is needed. Thanks for any help.

Quote from: Fredrik Åsenius on 21-March-08, 07:44:50
Don't know if it is that, but BIOS supports the 5000 BE from v. 2.3. Perhaps you can get help in making sure what BIOS version you got.
It does sound like Bas says processor related. Cause all required power cables are in place, right?
Why the rush in RMA-ing? You must be pretty good at computers to be able to say definitely when it is RMA time, and what to RMA... Or think you are pretty good.
I do computer support for a living but I will be the first to tell you that I don't know everything. I just don't know what else it could be and I guess I'm anxious to get my new rig up and running!! BF2 awaits me . . . It's comforting to hear someone with the same issue so that I don't feel like I'm going crazy here.

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Help k9n neo

Similar Messages

Maybe you are looking for