Help...KT3-Ultra2 and Hard drive problems

Hello, I'm new to this board.  I've been having an issue with hard drives lately.   I have an MSI KT3-ultra2 with the latest BIOS version installed.  I recently had a hard drive get completely erased and the actually size of it (10gig) had changed to 1 gig.  Just prior to that I got a corrupted file error in a game I was playing.  (The 10gig HD was a storage drive).  My main drive (Maxtor 40gig) started to clunk and whine and then eventually the computer would lock up hard.  I assumed the HD was going bad and was the cause of all the corruption.  So I went and bought a new WD Hard drive 80 gig.  Had it for about 2 weeks now and now all of a sudden I'm getting a similar clicking noise and a whine and then it locks up on me.  I can only run my computer for about 10 to 20 minutes before it locks up.  I have changed IDE cables to see if they were the cause and that didn't solve the problem.  I've also disconnected all my CD drives and still nothing.  I am going to take a guess and assume there is something wrong with my MB.  IDE controler perhaps?  Can anyone help me with this or confirm my thoughts on the situation?  Any help is greatly appreciated.  Thanks

May be your powersupply is faulty. Or the memory? try to get it checked

Similar Messages

  • Volume needs repair AND hard drive problem...

    OK so I have an Intel Based iMac and its about 1 year old. Randomly I got a message saying that the hard drive disc space is almost full, which makes NO sense. I have a 250 hard drive and I use it mainly for video editing. Before I got this message, I had about 100 GB left on my hard drive. I have NO CLUE where 100 GB went to, and i know it was not from video. Also I went to the disk utility and it said "Volume needs repair" and it gave me an "The underlying task reported failure,". Im not sure what to do and I'm hoping you guys will.....if this has been asked before, I apologize.

    Yes, you can delete it, but it indicates a bigger concern namely your maintenance scripts aren't running regularly to clean up the logs or you have a problem in the system or an application that is writing huge amounts of information constantly into the log file. You should check the log using the Console application (Utilities folder) and examine its content to see if this is the case.
    You should also read the following for information on installing utilities that can assure the maintenance scripts are run as well as other information on system maintenance that can help keep your computer running better.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.

  • Sandra 2004 and hard drive problem

    Since I ran Sandra 2004 my hard drive scores on other benchmarks PCMark etc all show my HD scores have taken a dump. I know that something is changed but I can't find it. ATA is mode 5 as it always is, 32bit(or is it 64?) is enabled, diagnostics show the HD is fine. S.M.A.R.T. is fine but score went from 550 to 107 on PCMark. Ouch.
    I also noticed Windows takes way longer that it used to to boot.
    Has anyone seen this? I can't find any post with similar issue. I'm in the process of adding SATA RAID0 so the problem will be moot but would really like to know what the heck happened.

    My 2 10,000 RPM Raptors in RAID 0 scored high 60s in SANDRA when I 1st installed. Now I can't get above 39. This is despite the fact that all of the reliable HD benchmarks show my RAID0 Array still cookin along. I really would not trust SANDRA's HD Benchmark (only really unreliable SANDRA test as far as I can tell). Try Hard Drive Tach and AIDA32's HD Plugin for a more realistic gage. Good luck!
                   damon69

  • Year and half old and hard drive problems

    My Mac book pros hard drive has crashed for the second time and its only a year and a half old. It was replaced the first time but now the warranty is expired. What Do I do? I'm going in to apple tomorrow but I doubt they will replace it for free.

    Call Apple Customer Relations - 1-800-767-2275.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.  See what they can do for you.
    GOOD LUCK!

  • K8n neo platinum and hard drive problem...

    greetings...
    well, I have K8n neo platinum mobo with SATA1 controller, and I bought WD 250 GB sata2. I did set up jumper to limit transfer to SATA1 mode on my new drive (although I tried it without jumper, it is the same). Hard disk is working but, I have varying trasfer rate when I copy files from WD250 on other drives, and when copying on that drive. Transfer is going fine, and then it goes very very slow, then again fast, then again slow...And, sometimes, when I am copying large amount of data on that drive, my computer freezes. When I test sustained speed, it is different almost every time (goes from 14 to 65)...
    I searched thru internet - with no sucess. I have very good power for my PC. I changed sata cables, and power cables. I updated all drivers. I tried installing XP IDE drivers for that new SATA2 hard disk. I tried almost everything, and with no sucess. WD250 is working fine for, let's say, a couple of hours, and then it again goes slow with varying transfer rate when copying. I also have a very good cooling system, so it's not because of overheating. I contacted WD, they told me to run their diagnostic tool, and the disk was healthy. They said that drive is ok then, and that it is probably my mobo that is causing problems.
    anyone have a clue what is going on?
    thanx in advance

    damn...
    can't believe no one ever had similar problem...

  • I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much

    I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?

    iOS: Importing personal photos and videos from iOS devices to your computer

  • Hard drive problem...... Please Help

    Hard drive problems
    I am sure it is due to my error or mistake but I received a new Maxtor III touch as a replacement for my failed drive yesterday after connecting it I went to Maxtor one touch manager software that came with it and the drive did not appear in the window so then I opened disk utilities and copied my notebook hard drive over to the Maxtor ran permissions on each drive and then closed down my system ! today when I opened my Powerbook with the Maxtor on it gave me the grey screen 2x so I disconnected the Maxtor ran permissions again and everything was fine until i power up the Maxtor and Grey screen again! Help How do I fix this?????

    Maxtor one touch III firewire 800 its connected to my Titanium G$ Powerbook I am beginning to think its just another drive failure

  • Help! folder icon w/ exclamation point - hard drive problem?

    I live in the philippines and the store which i called up said the only solution is to show the receipt and they will send it to singapore but i still have to buy a new one. it's like they're not giving me choices at all. i know my iPod is not yet "dead", why do i have to buy a new one? how can i have this repaired?! it hasn't been a year yet, but around 10 months already and i don't have the receipt anymore.
    here's what happened...
    for the past week my iPod has been skipping songs, going to the next ones but doesn't play at all. sometimes it even freezes. and i hear this whirring sound at the back.
    so i decided to connect it to the computer and erase all my songs first coz i thought maybe the problem was with the files. but iTunes didn't recognize the device. so i decided to reset it (so that the songs and my factory settings will be erased) by pressing menu and select at the same time. then after i did this the "do not disconnect" message kept on showing up and eventually it just stayed there. so i tried resetting again. the apple logo shows up but after a while the folder icon with exclamation point shows up. then it would turn off.
    I tried restoring it with updater but it says it could not mount the ipod. so this might be a hard drive problem already. how can i solve this?
    please help!

    Try calling their toll free number <probably charges apply when you're calling outside the US>, 1-800-827-0685.
    Usually, they will send your machine to the nearest repair station. I think in SEAsia, repair stations are in Malaysia.
    Your iPod comes with a universal warranty, so you could definitely have that repaired even without the receipt. <Im from the Philippines too. I what you mean...>
    good luck!=D

  • Help With Hard Drive Problem

      So I'm setting up my new computer and am having a problem.  When I start it up it goes through the bios and whatnot.  But, if I have the hard drive hooked up, the system will go to a black screen and stay there.  I've tried it as the master to the CD-Rom and vice versa.  Both ways stall as described.  I can boot up the CD-Rom when it's by itself, but not with the HD hooked up.  The weirdest thing is that the bios menu sees the hard drive and everythings.  So I'm stumped. Please help.
    EDIT: Computer stats below.  Also not that the CD-rom and hard drive are on the same IDE cable.

    Quote from: Maesus on 10-August-07, 16:00:27
    the HDD is blank right?
    Have you changed the boot sequence?
      The hard drive is not blank, no.  I've thought about that, but don't have a way of erasing it until tomorrow or the next day.  I wasn't sure if that would really make a difference though.  The main reason I'm not sure about that is the fact that it won't boot the CD-Rom when the hard drive is plugged in.  Even if I tell it to only boot from the CD, it still goes to the same blank screen if I try it with the HD plugged in. As I said before, it will boot from CD if the hard drive is not present.  I find it really weird that I can tell it to only boot from the CD-Rom and it still freezes with the HD present.

  • I need to upgrade my macbook ram and hard drive pls help

    Hi all,
    I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging.
    I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across sellers and buy a suitable peice of kit. Please help
    Questions:
    1 - How to find out which RAm do I need to buy and what is the maximum I can go on my macbook?
    2 - How to find which hard drive to buy and what is the maximum my macbook will support?
    3 - Can I buy the SSD drive instead of SATA for this macbook?
    Some of the specs are listed below:
    Hardware Overview:
      Model Name:          MacBook
      Model Identifier:          MacBook5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MB52.0088.B05
      SMC Version (system):          1.38f5
    MANY THANKS FOR READING AND REPLYING TO MY POST
    [email protected]

    Hi Chefjeegar
    Yes that screwdriver kit has the #00 phillips screwdriver that you need to access the RAM and hard drive. You'll also need the Torx driver to change the hard drive. http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/r ef=sr_1_1?s=computers&ie=UTF8&qid=1348072554&sr=1-1
    For a good explanation about RAM look at the page on OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
    In the UK Amazon or eBay might be your best bet for cheap RAM but read the description and reviews carefully. For a little more expensive but with a better warranty is Crucial UK http://www.crucial.com/uk/
    A good resource for working on your MacBook is ifixit.com http://www.ifixit.com/Device/MacBook_Core_2_Duo
    Is your external hard drive formatted for Mac? To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive. Put the new drive in your MacBook, then format and partition the new drive. Then use Carbon Copy Cloner to transfer your OS back to the new drive.
    Yes, you can put an SSD in the MacBook.

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

    Well, yes, data does get corrupted sometimes.
    The trick is finding what data.
    By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
    Because that's the quickest way to deal with such a situation.
    Back up the system first of course,
    Add back 3rd party apps one at a time in case one of them is causing the problem.

  • Need help! White screen and hard drive

    I have a MacBook Pro A1211 I got off Craigslist. It needed a new logic board and hard drive so I got both. My problem is I just found out the hard drive has windows on it and when I power on the MBP all I get is a white screen.  My question is is there a way to get windows off that hard drive while its installed in the MBP? I've tried every command I could find online to push when I power on the MacBook but it does nothing. I bought a copy of snow leopard 10.6 factory sealed and put it in the super drive but it just spins for a while and then stops. The fans constantly run also but I'm new to MacBook so I don't know if that's suppose to happen. I got the disk management to come up one by holding down option and power on but it didn't give me the option of choosing the SuperDrive and I can't get it back up. It's almost like the keyboard isn't working. If there's any suggestions y'all can give me I'd appreciate it.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • HT4759 I had to change my apple password to fix hard drive problem in my iPhone and now I cannot connect date stored in iCloud as my password has changed.  How do I plug in new password to iCloud to be able to retrieve data from my MacBook Pro to my I pho

    If you change your apple password how do you notifly icloud to resync everything?  Forgot my apple password, had to change it due to hard drive problem on my iphone 4 which had to be totally erased then rebouted and now works but cannot download from my computer/icloud due to password change.  So how do I orchestrate the change of password to icloud/computer to allow all to sync together?

    If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
    resetpassword
    If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

Maybe you are looking for