HELP::KT4V Can't detect my LTR-24102B

I just bought my KT4V motherboard. it cant detected my Liteon LTR-24102B cd-rw, it displayed Not detected/Not Installed(forgot which one). I tried to force it as CD/DVD in BIOS, it take age to boot and finally displaed ATAPI incompatible.
I tried both Cable Select/Master+Slave.
Besides, i then plug into IDE 1,2 or 3. Still the same.
I tried using 80-pin for it too. No luck either.
For my old computer it immediately detect its model,
buy for this mobo, nothing i detected.
How to make it work?
My Comp:
AthlonXP 1800+
mobo KT4V(w/o LAN, BIOS 1.50)
MAXTOR 20GB, 40GB.
Geforce2 MX AGP,
Motolora SM56 PCI,
ASUS CD-ROM S340
Liteon LTR-24102B cd-rw(firmware 5s5a)

I have searched through the forum for that topic.
But i can't find the solution for it. I have try their method: using 80 pin IDE cable, clearing cmos, try different IDE lead...etc
but it doesn't work.
It work once, i dono why. I work just after i switching the plug fr. kt4v to old, old to kt4v(keyboard mouse monitor phone line) with older firmware 5S54
But when i did another switch it doesn't work again, with the above firmare also.
It's strange...
Any advice?
Correction: KT4V don't have IDE 3. sorry for my typing mistake.

Similar Messages

How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

Hello Everyone,
We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
Any IDEA how this works.
Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
Pls help me out, its really urgent as to be implemented in my Project
Thanks In Advance
Sahil Shaikh

Hello Surtee
I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
Pls see if u canhelp me out ......
Thanks
Sahil Shaikh

Help!!! Itunes and Pc can't detect my Ipod Touch 4g

I tried everything that Apple Support told me to do and still can't detect my ipod touch 4g. Still stuck at apple boot logo, tried DFU mode and Recovery, still can't be detected by PC or Itunes. What to do? I need Help Badly.
When i connect my ipod, no sounds pops out but it opens and charge still stuck at boot logo.
I'm running Windows7 ultimate.
Some told me to connect it to a Mac Book, is it possible that it can be detected on a mac book? Because i only tried connectin it to other Windows PC with XP, Vista and still haven't got anything. I don't thinl it's a hardware problem cause my ipod just run low on battery and i restarted it and then It got stuck. xD

- Yes, another computer may help.
- Next try disconnecting from computer/charger and let the battery fully drain. Then charge and try again.
- Last, make an appointment at the Genius Bar of an Apple store. If defective, they will give you a replacement under your warranty.

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

ITunes can't detect my iPad Mini. Please help :(

Please help!
My iTunes can't detect my iPad, but it's normally connected to my PC.
I've already had my iOS 8 and upgraded iTunes to 11.4.
I did anything I can to fix this problem but iTunes just can't detect it. I've already searched everything to fix this. Ugh, I'm so frustrated. please help me

Hi Gracegb,
I'm not sure which steps in this article you've tried other than updating software, but please check it out.
iOS: Device not recognized in iTunes for Windows
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

How can I detect a dialog and respond?

I'm having trouble doing something that's probably not that hard. I'm trying to "Print to PDF" a bunch of old AppleWorks documents. When you open a document created in AppleWorks v6 it opens right up, but when you open a document created in AppleWorks 5 you get a dialog box that says, "This document was created by a previous version of AppleWorks. A copy will be opened and "[v6.0]" will be added to the filename."
Right now I open the file and then:
tell application "AppleWorks 6"
        activate
        repeat while not (exists front document)
                delay .2
        end repeat
end tell
When the dialog box pops up, there's no front document so the whole thing freezes until you hit OK. How can I detect this dialog box and dismiss it?
Thanks
PS
When the box is open I ran this and got this result:
/usr/bin/osascript -e 'tell application "System Events" to get properties of windows of application process "AppleWorks 6"'
minimum value:missing value, orientation:missing value, position:436, 153, class:window, role description:dialog, accessibility description:missing value, focused:missing value, title:missing value, size:412, 123, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXDialog, selected:missing value, name:missing value, description:dialog, minimum value:missing value, orientation:missing value, position:8, 76, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Starting Points, size:631, 189, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Starting Points, description:floating window, minimum value:missing value, orientation:missing value, position:4, 22, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Button Bar, size:612, 51, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Button Bar, description:floating window

Hi,
The simplest would be to set the application preferences in the script.
Like this :
-- *** set prefs ****
tell application "AppleWorks 6"
      activate
      set oldPrefs to its preferences
      copy oldPrefs to tPrefs
      tell tPrefs
            set old version warning to false --doesn't show the old version warning alert
            set converted file suffix to true -- append “[v6.0]” to documents converted from older formats
            set locked file warning to false
            set paint reduction warning to false
      end tell
      set preferences to tPrefs
end tell
-- *** end set prefs ****
--**** your script, example ***
set tfiles to choose file with multiple selections allowed
tell application "AppleWorks 6"
      repeat with i in tfiles
            open i
            tell front document
                  -- do something
            end tell
      end repeat
end tell
--**** end your script ***
-- *** reset prefs ****
tell application "AppleWorks 6" to set preferences to oldPrefs

How can I detect a certain text within a field within CASE using IF

Dear all,
for a transformation / generation of values receiving from R/3 into BW I try to
manupulate three fields. I have a problem detecting a string in a field.
I am using a CASE with several WHEN clauses on one field. Depending on the
value, an IF is integrated. There I look into another field evaluating, if it contains
a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
System gives error for the locigal expression. I also tried CS, but same error.
How can I detect a certain text within a field and which is the right logical
expression.
Many thanks in advance!!!
Claudia

Hi,
Folow the blow example...
May be it helps....
DATA: hex1 TYPE string,
hex2 TYPE string.
hex1 = 'FFFF'.
hex2 = '123FF'.
IF hex1 CP hex2.
ENDIF.
Cheers,
SImha.

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

JMF-based applet can not detect audio devices on Vista (?)

Hi,
As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.
Here is my testing environment:
HP XW4600, RealTek HD Audio onboard sound card,
Vista SP1 (Business, Home Premium, and Vista64)
JRE1.5.0_16, JMF2.1.1e
A recording Applet runs in IE7 (which works fine on XP and its Java application version always works fine on Vista)
I have tried a number of things without success:
1)Use different audio formats as the input parameter for getDeviceList
2)Try CaptureDeviceManager.getDevice(new String("DirectSoundCapture"))
3)CaptureDeviceInfo info = new CaptureDeviceInfo(com.sun.media.protocol.dsound.DataSource.NAME,new MediaLocator("dsound://"),null);
4) Vector devices = (Vector) CaptureDeviceManager.getDeviceList(null).clone();
5)Uncheck UAC(Vista User Access Control)
6)Set IE settings least restrictive
7)Try signed or unsigned recording Applet
8)Pack the recording Applet to a jar and deploy to JRE\lib\ext
9)Run JMFInit and copy the files in JMF\Lib to System32 folder
On a few occasions, audio devices can be detected. For examples,
10)Upgrading an HP XW4200 (XP machine with AC�97 codecs driver) to Vista,
11)1/5 chance on the machines with both Sun JRE and MS Java SDK installed.
12)Trying Item # 9. it worked once on one machine, but after rebuilding the machine, the same trick does not play.
I am wondering if there is a way to let JMF-based applets detect audio devices on Vista or this is an inherent problem with JMF, IE and Vista.
I would appreciate it very much if you�d kindly offer any help and suggestions.
-Belfield

>
As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.>(..in an applet)
>
I would appreciate it very much if you'd kindly offer any help and suggestions. >I suspect the basic problem here, is the installer that defaults to preventing the applet access to record sound (I am guessing that would 'spill over' into web-cam permissions). A quick test of that is to try the same code as an application.
If the application works, one possible fix is to launch the application using webstart. Webstart will work from a web page, and offers many other advantages over a standard applet.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

[HELP] I can't install the bootcamp drivers on my mac.

Hello people.
I have a problem and i wish if you could help me with.
I have an iMac Early-2009 ( 2.66ghz C2D / 4GB 1333mhz RAM / GeForce 9400 256mb ) with Mountain Lion 10.8.4
The problem is that, i can't install the drivers from the bootcamp app ( the one from the bootcamp itself app, where you need a USB to download it)
i've already partitioned the HDD, and installed succesfully a Windows 7 Ultimate 64bit.
But there's one little issue, when i try install the drivers i downloaded before on my USB, it says that "Bootcamp x64 is unsupported on this computer model".
BUT, what? i've installed correctly the Windows 7 64bit on the iMac.
I can't install anything, but only graphics driver. ( manually)
I searched in every forum trying to resolve my problem, i've read that you can install it from de DVD with Snow Leopard that came with the computer
but that disk is broken; it's annoying because it seems that is the only solution , with that resulting on a dead end.
I could install my NVIDIA drivers, using the ones from bootcamp drivers, BUT USING THE WIN_32 version because the WIN_64 was unsupported by my machine. ok, i could install the drivers and was the 263.03 i think.
Now i want to upgrade to my lastest drivers ( 320.14 WQHL ) and says that can't detect my gpu. but the old driver that came with recognized it with no problems. I tried also auto detect GPU, and the same drivers but no result.
Anyway, the main problem is that is "Bootcamp x64 is unsupported on this computer model". with a Windows 7 64bit copy installed on the bootcamp partition. this is ******* me off
I sucessfully installed on my Macbook Pro Late 2008 ( C2D 2.06ghz / 8 GB RAM / 9600m GT ) and everything fine, a Windows 7 64bit. installed the drivers and everything fine, even accepted the lastest drivers (320.14 WQHL) from nvidia. but that was on Mountain Lion 10.8
but since 10.8.3 only lets you install only 64bit, i can't search for a copy of win32bit and install it because, it's going to be the same problem anyways.
So if you could help me out with this *** problem.

I have an iMac (24-inch, Early 2008) — iMac8,1 and I have exactly the same issue. Now, I'm running Mavericks, unfortunately.
On the one hand, from http://support.apple.com/kb/HT3986, I see:
"Do all Intel-based Macs support Windows 7?
All Intel-based Macs support Windows 7 using Boot Camp 3.1 or later except these:
iMac (17-inch, Early 2006)
iMac (17-inch, Late 2006)
iMac (20-inch, Early 2006)
iMac (20-inch, Late 2006)
MacBook Pro (15-inch, Early 2006)
MacBook Pro (17-inch, Late 2006)
MacBook Pro (15-inch, Late 2006)
MacBook Pro (17-inch, Early 2006)
Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)"
So, I should be good.
However, from http://support.apple.com/kb/HT5634, my iMac is not supported in Boot Camp requirements, which would have been nice to know before I purchased a copy of Windows 7. I cannot get the Windows drivers to download from Boot Camp, and when I download them manually, whether version 4 or 5, I get the "Bootcamp x64 is unsupported on this computer model" message, which makes the HT3986 information unhelpful. I even tried a Snow Leopard CD while in Windows, and it gave me the same message. I tried one of the 3.x Bootcamp files, and still no good.
The funny thing is, I ran Bootcamp to create the partition for Windows 7, and it even popped up a message stating that Windows 7 was the latest Windows I could install on that machine, and the installation went fine. However, I am missing who knows what drivers, etc, because Apple won't provide the Windows support software for a machine that evidently can run the software. The graphics drivers appear to be fine, as the aspect ratio corrected itself, something that didn't happen on my MBP without having the Windows Bootcamp software. I also have wi-fi, which is better than some experience.
I even cannot get the little Boot Camp Windows icon/software that should be accessible in the system tray, so I can set preferred system to boot in, tell it to boot into OS X, etc. So, for that, I would have to rely on rebooting while holding down the ALT key, and my non-Apple keyboard for some reason won't do that (but that's another subject).
I guess there is nothing to do other than just do everything manually, piece by piece, unless someone has a solution that is eluding me.

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

How to save a Photoshop PDF file with fonts that can be detected in Acrobat?

We created a PDF file using Photoshop CS5, for the purpose of using it as a watermark on documents. We saved this file as Photoshop PDF file, but for some reason the fonts cannot be detected when the file is opened in Adobe Acrobat.
We need it to be recognized by Acrobat so that we can easily add the watermark to documents on a regular basis.
Right now, Acrobat cannot detect the fonts in this file -- even though it is a basic font like Arial -- so when we add the watermark to a document, the fonts in the watermark becomes very degraded in appearance.
Any advice would be hugely appreciated!

I've tried several settings when saving as a PDF, to try to produce a file with fonts that can be detected by Acrobat. I tried the presets listed in guide: Photoshop Help | Saving PDF files
But none have worked.
I cannot use PNG because it is not one of the formats that Acrobat allows for a watermark. And JPG doesn't work because I need transparency.

HELP::KT4V Can't detect my LTR-24102B

Similar Messages

Maybe you are looking for