Help - L1 aggregate/multiplex using Nexus/65xx ???

Hi !
This is a field i never got into so i lack few details . so forgive my trivial questions .
I have a datacenter spread on two buildings .
naturally i connect the two parts of the datacenter over the meetmeroom .
as i grow the amount of the fibers i need to add also grows . and the cost accordingly ...
i would like to find a way to take several Ingress 10G fibers and aggregate them at layer 1 , not layer 2 , into 2 or more Egress 10G fibers .
like taking each ingress and have it through a specific color/channel in the light ?
the reason i want layer 1 and not 2 is to override looping possibility . i see L2 here as a point of failure . and trying to avoid hanging switch on another switch .
like probabaly to put two of these on each side .
so my devices are :
Nexus 5010
Netxus 5548
Catalyst 65xx
is there a way to transform each of them to do that ?
ill thank you if you can drop here few devices who can do that .
Thanks

You could deploy multiple 10G channels over a pair of singlemode fibers (SMF) using CWDM or DWDM technology. 
The 6500 supports pluggable DWDM optical interfaces, which can be connected directlyto the DWDM filters in the EWDM solution. The Nexus 5010 & 5548 don't seem to support pluggable DWDM optics, so you could use am external transponder (one option provided below) which can be configured to accept a standard 10G SX or LX optical signal from the Nexus and output a DWDM (or CWDM) signal for the DWDM or CWDM optical filters. 
CWDM Filters
https://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/product_data_sheet0900aecd8029d01b_ps708_Products_Data_Sheet.html
EWDM Filter Solution
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_data_sheet0900aecd806a1c36.html
10G Tranponder - MRV
http://www.mrv.com/product/MRV-FD-10GXY
Working with 10G WDM optics will not be inexpensive and, depending upon your network,, it may be less costly to install additional fiber. 
I hope this helps!

Similar Messages

  • Need to find out wether aggregates are using or not

    Hi ,
    In My BW System Aggregates are build on two cubes say Cube 'X' and Cube 'Y'.
    In Sap Early watch Report , they have suggested to De-activate or remove aggregates which are not used .
    1)I need to find out which aggregates are using and which are not using from a period of time (take one month).
    2)I need to find out which queries are using which aggregates.
    Please let me know how to find the above information.

    Hi Lakshmi,
       Welcome to SDN.
    Please go through these links.
    You can find out efficient/inefficient aggregates from BW statistics.
    Performance Tuning for Queries with Aggregates
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
    http://www.asug.com/client_files/Calendar/Upload/ASUG%205-mar-2004%20BW%20Performance%20PDF.pdf#search=%22BW%20statistics%20pdf%22
    Business Intelligence Performance Tuning [original link is broken]
    Hope it Helps
    Srini

  • Can you help me understand the use of the word POSITION in TR and CFM?

    Hi,
    I am trying to have a view of typical BI reports in TR and TM/CFM so through my research I came to the following link:.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/62/08193c38f98e1ce10000000a11405a/frameset.htm
    My problem on this link and other postings on this site seem to be the same. Can you help me understand the use of the word POSITIONS in these context:
    1. Our client has asked for financial transaction reports in BW, such as position of Borrowings, Investments and Hedge Operations (TM data).
    2. I have a requirement on, some reports related to Money Market (Fixed Term Deposits, Deposits at Notice) something on FSCM-Treasury and Risk Manager. These reports will be similar to that of Loans, i.e. Position statement, flow statement, etc.
    3. The set of position values for a single position or a limited amount of positions can be reported by transactions TPM12 and TPM13 in R3.
    4. 0CFM_C10 (Financial Positions Cube)
    Do you have some simple report outputs to help clarify how the word POSITION is used in such environments?
    Thanks
    Edited by: AmandaBaah on Feb 15, 2010 4:39 PM

    If I future buy 10 shares in company at £1 per share - at the end of the day my potential value is £10
    The next day the shares drop tp £0.9 per share - I have a negative position - my shares are only worth £9
    I haven;t bought them yet - but I have a negative position - ie if things stayed as they are - I am going to realise (ie end up with)  a loss
    Now you can use this for loans and foreign exchange banks as well...

  • PLEASE help!! I use Outlook for my email and the Mail App Icon in my dock was also storing all my emails. So, I tried to delete ONLY the emails in the Mail App but somehow (under Preferences maybe?) I also deleted all my emails in my Outlook inbox.

    PLEASE help!! I use Outlook for my email and the Mail App Icon that is in my dock, that I know nothing about, was also storing all my emails. So, I tried to delete ONLY the emails in the Mail App but somehow (under Preferences maybe?) I also deleted ALL my OUTLOOK emails in my inbox.  Can someone please please tell me if there is a way to get my Outlook inbox emails back OR EVEN the emails that were in my Mail app - because even tho I never use the Mail app, at least the emails would be there.
    When I was trying to delete the emails in my inbox for the Mail app - I followed THESE directions.  It did in fact clear my inbox for the Mail app.  But then I went to log on to my Outlook account and EVERY SINGLE EMAIL was gone.  And not in the Deleted box.  Just gone.  Here are the directions I followed that screwed everything up.  Please help.
    Top menu bar, Mail > Preferences > Accounts > Mailbox Behaviors.
    Uncheck "Store deleted messages on the server".
    At the drop list for "Permanently erase deleted messages when", choose "Quitting Mail".
    Next...
    Top menu bar, Mail > Preferences > General.
    At "When searching all mailboxes, include results from", uncheck "Trash".
    Select All = command A

    i found out my prob!
    here is what you do.
    go to the "system preferences" on your dock.
    click "software updates".
    click "installed software"
    if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
    go to mail.
    click "mail" at the top.
    click "preferences...".
    find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
    hit the "+" (right next to the "-") and add your accout back!
    its something with that update that effected mail, i hope this works out for you, if not reply back

  • Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac.   I still can't get my contacts to open

    Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac.
    I still can't get my contacts to open in Numbers like they used to do. I have a group of five addresses in a test folder in Mail called "untitled group." But no amount of pasting, dragging, etc can get them to open up in Numbers. My "real" folder has almost 100 addresses so I can't do it one by one.
    Thoughts?
    Thanks again.
    Bob

    Bob,
    You can place contacts in a table In Numbers by the following methods:
    Numbers 2.3:
    drag from contacts
    Numbers 3.2
    copy from contacts, then paste into Numbers
    In both cases you need to open System preferences, then select the "Security & Privacy panel and allow Numbers aaccess your contacts information.

  • Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

    Please, help!
    After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
    Thanks

    Have you been trying to download from the app store? Did you get a message?
    As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
    Barry

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER.

    I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER. edit

    You are unfortunately out of luck with an Intel Mac and OS X 10.4.11<br />
    Best would be to update to OS X 10.5 or later if you want to use Firefox 4 and later versions (current is 8.0).<br />
    There is a Firefox 8 compatible third-party version TenFourFox from www.floodgap.com for a PowerPC Mac, but no alternative for an Intel Mac with Mac OS X 10.4.
    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/8.0/system-requirements/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    Hi Mary,
    I don't remember those arrows in 10.6, only 10.7 & up!?
    I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved  all the way to the left.  Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
    By wuzradioman here...
    https://discussions.apple.com/thread/4218928?start=0&tstart=0

  • I'm getting this message: "Firefox prevented this page from automatically redirecting to another page." but unchecking the box for "warn me when websites try to redirect or reload the page" has not helped. I'm using Firefox 3.6.3 on Mac OS 10.6.3. M'aidez

    Can't load Google Calendar. I'm getting this message: "Firefox prevented this page from automatically redirecting to another page" but unchecking the box for "Warn me when websites try to redirect or reload the page" has not helped. I'm using Firefox 3.6.3 on Mac OS 10.6.3. It's not reported as a generalised problem in Dashboard. Google Calendar opens and works fine on my 12" PowerBook G4, but this is a recent problem on my G5 13" MacBook Pro. Mayday!
    == URL of affected sites ==
    https://www.google.com/accounts/ServiceLogin?service=cl&passive=1209600&continue=http%3A%2F%2Fwww.google.com%2Fcalendar%2Frender%3Ftab%3Dmc%26pli%3D1&followup=http%3A%2F%2Fwww.google.com%2Fcalendar

    No I'm not using NoScript, but I'm pleased to report that the problem got resolved by deleting the original bookmark, logging in again, opening Google calendar, then bookmarking it again.

  • HT1152 All this help info tells me to use idvd, but I can't get it to open.  I asked the applecare guy and he says the new macs don't include idvd any more, so why do all the menu and help items say to use it?  I know there's other dvd burner software, wh

    I want to burn my imovie to a dvd.  All the help info says to use idvd but I can't get it to open.  The applecare guy said idvd is no longer included in new macs, so why are all the instructions still saying to use it?  Is one of the other software offerings, like dvd Cfreator for Mac, ok to use for this?  What's the best one?

    Please clarify what you mean by "you can't get it to open". Is iDVD on your system or not? If this is a new iMac, iDVD is no longer bundled with new Macs, so the application just isn't there and hence of course can't be opened. You can still purchase it as part of the retail iLife '11 box, though, if you want it, and it would be less expensive than DVD Creator (which I have no experience with), even though you'll get some redundant applications.
    Regards.

  • Need help on how to use conference facility within adobe connect

    I need some help on how to use conference facility within adobe connect?

    I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community

  • Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Search help for Web Dynpro using the SAP-search help

    Hi,
    I’m trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
    The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
    The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
    The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
    In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, …) in the project. In addition it should create the call in the customer generic.
    It would be great if someone can give me a feedback!

    Hi Mike,
    The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
    SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
    Personally I'd recommend you give yourself a little project to work on and just get stuck in
    Kind Regards,
    Owen

  • How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there.

    How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.

    Which application are you using?
    Clinton

Maybe you are looking for