HELP! laptop wont load past Welcome and warranty out

I have an HP Pavilion g6 with Windows 7 Home OS. I have no repair disc/install disk as I bought it brand new with the OS already installed and ready to use. I bought it in Fall 2011, so my warranty is out and I can't get help from Tech because they want to charge me just to talk to me over the phone without a warranty.
My laptop will load until the Welcome screen, and I have seen many posts already about this issue, however they are all able to load in Safe Mode and/or still have their warranty. I cannot load in Safe Mode. System Tune-up will not complete, stops halfway through as Failed, Startup and Run-in tests also fail. I already had problems back in March this year and had to restore to factory settings.
What boggles me most, is it was working fine until 2 a.m. this morning, when i stopped playing Fallout NV - was offline, have not connected it to internet for some months now. However, after the game I unplugged my laptop and took it upstairs and plugged it in in my room, and since then it hasn't worked. I can get to the boot options (Esc, F2, F8, F9, F10, F11, F12), but unable to do system repair due to no disc, and even though when I restored it to factory settings in March and made sure to do a Restore point at that time, the OS is not finding that restore point at all. It is not acknowledging any external hard drives I attach so I can do a new restore point. I don't want to just lose my photos - they are the only photos I have of my children (i think this is why most of us don't want to just restore to factory settings all over again).
Is there any way to do get it up and running again without losing literally EVERYTHING? I don't give a crap about the games or apps, those can all be installed from Steam later on again. But i don't want to lose my photos and baby vids and documents.
Thanks in advance,
Ree

Hi Ree,
Here are a couple of methods you could try to back-up your existing data.
1. One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
2. Another option would be to remove the HDD, place it in an external caddy - an example is on the link below - connect this to another PC and see if you can access your files.
External HDD Caddy 2.5".
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

My laptop wont load past the spinning wheel when turning on

Please Help!
When turning on my laptop it wont load past the start up screen with the loading wheel.. please can someone help me fix it!?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices.

Flashed new bios V1.10 , now Pc wont load past windows loading sceen.HELP

hi i have a neo-f p965, i flashed the bios today to the new update v.1.10. now my pc wont load past the windows loading screen, it just reboots every time.
i want to go back to a older bios version if posible. can anybody help me, this is a disaster if i cannot get it to work.
many thanks
Noel.

Get this.
Select your motherboard. Then click BIOS, download previous version.
Rest is simple.
Or you can stick with the 1.1 BIOS and reinstall Windows.

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store.

Started loading mavericks on my laptop, won't load the system and cancels out at 49%

Started loading mavericks on my laptop, won't load the system and cancels out at 49%. Can you help

All I can suggest is to reinstall Windows, see link below on how to order recovery media for your model. You will have to reinstall Ubuntu after using the recovery media so back up your files to an external drive. You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
.

Wont load past gray apple screen

my macbook pro wont load past the grap apple screen i cant figure out whats going on with it any suggestions past the "recommended" ones? there is a crack in my screen but i dont think that would do anything to the computer running, my first thought is the HDD but i dont want to replace it if i dont need to.

sorry actually lion OS

Java Applet Wont Load Past 80%

Someone is running a java based paint chat off of their home system, so far all of us have been able to load it all the way, except for one person who can't seem to get the applet to load past 80%.
She says she's got the latest update for OS X and she's gotten it to load before. She's tried updating Java and restarting her system. We don't think it's a firewall, seeing as other people can access it and she doesn't think she's running one.
Any thoughts on what the issue could be would be greatly appreciated.

Have her go to this Sun page and test her Java installation.
http://java.com/en/download/help/testvm.jsp
If there's no problem, she should look for a cause other than Java/applets.
If there is a problem, the page has troubleshooting information.

Java applets wont load in Safari and constantly crash in Firefox

I have to use Java Applets to work from home. I normally use Firefox as my browser but since the last Java update Forefox keeps crashing. I have tried Safari too and it wont load the applets at all. I am desperate to get some work done but I can't get into my work files that are stored on my office's servers.
I have seen lots of discussion about enabling java etc. in my browser and all of that has been done.

Make sure your Java system is updated on both sides (home and work computers).
As an alternative, you might look into a non-Java VPN solution. I use RealVNC (free for up to 5 computers) to work from home on my Macs and connetc to WinXP and Win7 systems at work. It works beautifully and I can connect to all 4 work systems simultaniously! The only thing the free version won't do is print remotely... so I print to PDF in my Dropbox and print that at home.
For VPN, I use a Cisco RV042 4 port router (about $90 at BestBuy) and connect via the built in OS X VPN in the Network Preferences panel. It literally took less than 5 minutes to set up. Sweet, simple, minimal cost and setup, and I can work from the house 24/7 if needed.

Help-Safari wont load any pages-others having same problem

Safari wont load any pages. Tried reinstalling Safari. Nothing. Zip. Notice that people on the Safari for Windows board are having the same problem.
WHAT IS GOING ON? Anyone know?
I get the menu bar, but not Bookmarks, etc. Cannot see a blank page. Cannot open a blank page, BUT my efforts (Untitled and Untitled 2) are reflected in the Dock. A right-click there shows that the pages are open, but obviously invisible.
I really need to fix this.
Firefox works. As do other apps.
Message was edited by: mashamax
EDIT:
The last thing I did before this happened was open a .pps file I got in email. If I do what was suggested in the Safari for Win post where someone is having the same problem: empty the cache, everything becomes greyed out. Its as if everything becomes invisible.
If I click on a link in Apple Mail, the URL shows up in the dock right-click as if it has mounted, but it hasn't. No window. Nothing.
Message was edited by: mashamax

Do you actually have a data plan from your cellular provider?
Being connected to 3G does not automatically indicate that a data plan exists on the account or is even set up correctly on the carrier side.

My Macbook wont load past the apple screen.

ok so I have a macbook from late 2007 and it's not loading past the apple screen. Yesterday it froze so decided to turn it off and it hasnt started up since. Ive tried safe mode, resetting the NVRAM/PRAM, and then i decided to restart it and press command v and a screen popped up saying.
npvhash=4895
PRE enabled
64 bit mode enable
darwin kernel version 18.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/release_1386
vm_page_bootstrap: 246299 free pages and 15845 wired pages
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
AppleACPICPU: Processor Id=0 LopicId=0 Enabled
AppleACPICPU: Processor Id=1 LopicId=1 Enabled
calling mpo_policy_init for TMSafetynet
Security policy losded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Quarantine
Security policy Loaded: Seatbelt sandbox policy (Sandbox)
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University for Californai. All Rights reserved.
MAC Framework successfully initialized
isong 5242 buffer headers and 4096 cluster 10 buffer headers
IOAPIC: Verdion 0x20 Vectors 64:87
ACPI: System state [so s3 s4 s5] (s3)
PFM64 0xf10000000, 0xf10000000
[ PCI configuration begin ]
PCI configurstion changed (bridge=1 device=1 cardbus=0)
[ PCI configuration end, birdges 4 devices 17 ]
AppleIntellCPUPowerManagement: (built 16:44:45 Jun 7 2011)ninitialization complete
mbinit: done (64 MB memory set
for mbuf pool)
FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001cb4fffe8bb384; max speed s400.
rooting via boot -uuid from /choosen: 49342205-A733-3921-9F2C-4D88EAA7EB64
Waiting on <dict ID="0"><key><string ID="1">[0Resources</key><string ID= "1">I0ResourceMatch</key><string ID= "2">boot -uuid-media-</string></dict>
com.apple.AppleFSCompressionTypeZlib Kmod start
com.apple.AppleFSCompressionType L\load succeeded
appleIntelCPUPowerManagementClient : ready
Got boot device = IOService:/AppleCPIPlatformExpert/PC1000/AppleACPIPCI/SATA@1F ,2/AppleAHCI/PRT2@2/I0AHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice /
IOBlockStorageDriver/ST980811AS Media/IOGUIDPartitionScheme/Untitled 102
BSD root: disk0s2, major 14, minor 2
[Bluetooth: :CSRHIDTransition] switchToHCIMode (legacy)
[Bluetooth: :CSRHIDTransition] transition complete.
CSRUSBBluetoothHCIController: :setupHardware super returned 0
AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
AppleYukon2:RxingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
disk0s2: 1/0 error.
     0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [ErrType 10] [ErrNo 5] [10Type Read] [PbnukNum 50624960] [LblkNum 8] [FSLogMsgID 142858201] [FSLogMsgOrder First]
     0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [Path /usr/lib/dyld/ . .namedfork/rsrc] [FSLogMsgID 1462858201] [FSLogMsgOrder Last]
/SourceCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtilsKern.c :344: VNOP_GETXATTR com.apple.ResourceFork for /usr/lib/dyld: 5: error
/SourceCache/AppleFSCompression/AppleFSCompression-24.4/Compressors/Type4/Compre ssorType4Imp.c.304: fh_getxattr /usr/lib/dyld: 5: error
/SoundCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtils.c:223: supplyChunk: error
decmpfs.c:1149:decmpfs_pagein_compressed: err -1
CODE SIGNING: cs_invalid_page(ox7fff5fc22000): p=1[launchd] clearing CS_VALID
Sleep prevented by SB 1, SS 0, RS 1

reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
you will have to buy a new drive and simply restore to that drive from the backup.

Laptop wont load warranty expired a month ago

i have an HP 2000 notebook pc. product id is D1E81UA#ABA. serial # [edited by Moderator]. as mentioned above my warranty expired about a month ago. when trying to load my laptop i recieve a screen that says preparing automatic repair. a few seconds later it goes blank. im not sure whats happening. i was recieving a blue screen telling me error code 0xc000185 but now its just going to a black screen. help please

Hi @tommy62278 ,
Thank you for visiting the HP Support Forums.I needed to edit your post and remove the Serial Number. In Accordance with our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Help, my laptop wont load

My keyboard on laptop started acting weird, I updated the driver, still weird, I tried to change the language, nothing. I restored, turned off, then turned it on and without pressing anything, it typed a password and deleted it, I tried to type but nothing, restarted and it helped at me and turned itself off. I turned it on again, same thing happened.
I need help with it as it was expensive present from my brother, I need it to work, please help,

Hello jezz1
Welcome to the HP Forums!
I understand the computer does not load. I will do my best to assist you! To troubleshoot the issue, please let me know exactly what happens when you try to load the computer. Additionally, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Laptop not loading past start up apple icon, please help ?

I Turn the laptop on and it gets to where the screen is light grey and the apple icon is there and the little loading circle is going but after a while it stops loading and just goes to a blank screen, does anyone why it's doing this ?

An early 2011 MBP came with Snow Leopard disks. Insert the original installation disk in the DVD drive slot and start up the MBP with the C key held down.
Proceed with the install instructions until you see a menu bar in top of the display.
From the menu bar, click on UTILITIES.
From the drop down menu, click on DISK UTILITY.
Select Disk Utility>First Aid and run Verify and Repair.
What are the results?
Ciao.

Help me! new ipod but it wont load new songs and itunes freezes!

i recently had to trade in my old ipod as it was faulty and between losing the old one and getting my new one i reformatted my computer, i downloaded itunes and re loaded all my cds back up
plug in my ipod and itunes freezes instantly, give it a few minutes and it slowly starts working untill it says cant load files, now can we not put m4a onto ipods? and if not why on earth did itunes decide to put it on as that?
someone please tell me how and what i should do to get my songs onto my ipod without it freezing and being a menace!

further inspecting my itunes and ipod it is now coming up saying the disk could not be read from or written to. what is this?

HELP! laptop wont load past Welcome and warranty out

Similar Messages

Maybe you are looking for