HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

Similar Messages

Layer 0 exceeds the maximum layer size allowed.

I am getting the following message and do not know what to change in my pref.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

No change in preferences, it is something you need to make a marker for on a DL Disc
On the layer break some threads below - basically there needs to be a marker somewhere so that is around 1/2 way give or take Take a look at the PDF pages 576-586 for some of the details.
http://discussions.apple.com/thread.jspa?messageID=4274608&#4274608
http://discussions.apple.com/thread.jspa?messageID=4470720&#4470720
http://discussions.apple.com/thread.jspa?messageID=4309773&#4309773

Formatting was not successful. Layer 0 exceeds the maximum layer size

I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

Stream analytics - Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5

Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
Naveen

Hi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas

Is there is a way to export the themes from iDVD to DVD Studio Pro?

OK...so here's what I'm trying to find out: is there is a way to export the themes from iDVD to DVD Studio Pro? Or can I build the project in DVDSTPRO and import it to iDVD to build and burn?
I've read several threads here and haven't come across my specific question. If I missed it, please copy me a link. Otherwise, I'd like to use the templates/themes in iDVD with my FCP project.
I was thinking about importing the project from FCP to iDVD. Then, I thought about the markers etc....
So, if anyone had an idea, tip or link, I'm all for it!
Thanks!
ron

Importing iDVD Projects and Themes
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5. In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations.
If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro User Manual+

Help...!!!! dvd studio pro 3 opens but does'nt respond

Hi...
I start dvd studio pro 3...everything ok. then cannot do anything...no imports no open recent proyects...no new projects...none...
I erase all dvd studio files I could find (also in the library) and reinstalled the program...and SAME"...
Can somebody help me, please..!!!! thanks in advance,
David
DVD Studio Pro 3 version 3.0.2
G5 dual 2.5
mac os x 10.4.7

Did you delete the preferences and other items such as receipts?
Users-> [User]-->Library ->com.apple.dvdstudiopro.plist
STARTUPDISK-->Library--> Preferences-->com.apple.RegDVDStudioPro.plist
STARTUPDISK-->Library-->Packages-->DVDStudioPro3.0.2Update.pkg (that iss update also look for others)
Is this the whole suite or just DVD SP? Did you download all the updates for the Pro Apps?
Also did you repair permissions or try anotheer user?

What is the maximum file size allowed by Yosemite's Archive Utility?

I've seen radically different answers to this question, ranging from ".zip files have a 4GB size limit" to "no limit other than the OS maximum file size". It's been very difficult to find current info on this.
I have lots of large folders full of recording projects --- I'm talking up to 45GB or so --- and I've been experimenting with different methods of zipping them in preparation for cloud backup. Several applications have been willing to zip my enormous folders into archives, but then choke when unzipping them, telling me that the files cannot be unzipped or are corrupted. Using the "Compress" shortcut in the finder has so far yielded the best results, keeping all necessary resource forks, etc., and unzipping properly, even when other apps have insisted the files are corrupted. However, I'm afraid to continue with this procedure until I can get a straight answer on this issue: have I just been lucky so far? IS there an actual size limit?
...It only seems to work when I both zip and unzip with the Archive Utility. Other archiving apps will either render the included projects unreadable by my recording software when zipping (I suspect because of alteration or stripping of resource forks), or will refuse to read the giant .zip archives generated by Archive Utility.
I've set up the Archive Utility to produce .zip files, as I feel these are the most likely to be recognized by a variety of cloud storage services.ny
...Any guidance would be greatly appreciated!

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Please help! dvd studio pro 3/ m2v issues

hi,
i have been attempting to burn a simple dvd for 9 hours now. i'm using dvd studio pro 3 on a macbook pro (OS X Tiger); the video assets comprising my dvd studio pro project are mpeg2 files. everything looks beautiful when i simulate the menu within studio pro. then when i build/format, the formatting fails every single time and gives me NO error code, nothing to go on - all it says is "formatting failed".
studio pro 3 can import and play the mpeg2 files, but not build/format the project with them - i'm wondering if this is an obvious compatibility thing with macbook pro. i know macbook pro can't read mpeg2 files on its own (much to my chagrin - a major flaw in my humble opinion but that's a different story) - like, if i were to try to play the file in the quicktime player. but, should i be having this problem when working with the mpeg2 files strictly within the software? final cut pro exported the files just fine, dvd studio pro accepted and can play them - is the dvd drive on a macbook pro unable to write a project with original assets in mpeg2 format even IF, theoretically, these should be encoded by the software prior to burning the dvd?
this is really time urgent as well, so any help would be much appreciated... thanks!

seraphine8 wrote:
ah, thank you, the mystery about the studio pro 3 is somewhat solved. i've been having problems with it ever since i transitioned to the intel, but strangely it has worked about half the time so i didn't think it was unsupported altogether.
Nope officially unsupported and not to be used on Intel Machines (though of course once in awhile it will work properly, which is almost worse than never working )
i have tried building first then formatting; i have tried everything - formatting first, building/formatting, building first, etc. i have tried 2 different brands of media dvd-r. as for DL with proper layer break, i was reading a bit about that in another thread but i'm not sure what it pertains to exactly... nothing i've done is very complex and it's all been very DIY learn-as-i-go. so... not sure if i'm missing something there.
thanks
Can you build the DVD? Or will it not even build? (Since it is not a DL do not worry about the layer break, sometimes if making DL DVD and there is no break found it can stall things out)

HELP! DVD Studio pro shows a 3GB movie as 88GB!

I am realy in deep troubles!
Doing a (volentary) documentation about my city, the final doc movie will be shown at 7.januar 2006.
Since 1 1/2 year i am working on DVD projekt and nearly finished.Suddenly DVD Studio pro goes crazy.
I have a lot experiances with iMovie and iDVD but not with Production Suite (FCP + DVD Studio pro) .Maybe i have some misstakes done with FCP or DVD studio pro. But i can't see what and why because during this periode i have burened and check it on TV couple of times bevor.I could cry.
Just have upgraded to the newest Production Studio pro Version and same result.
Ok, one thing i have changed, and later the Problems stared!
In DVD Studio pro you can say how much motion you have.
small, meduim,often i guess (have it in german)
This setting worked and i could one time burn a DVD.
I can say the quality was better, better color and less noise or moire.
I changed it back, but no success.
I have seen in the forum discussion about audio which might
doe troubles and some advises using a.peak tool.
I have checked the aiff files and there are terrible big!
350 MB the biggest. I am totaly confiused because it worked bevor. Have checked the sequenzes from FCP which still works.
What would you suggest first befor i jump out of the window.
Many thanks for any helping hand
Sven

Finaly i have solved my problem!
The forum and the helpers did guide me in the right direction.It was not logicaly to me why it work again.
With FCP i could view the sequenz correct.
Then i used compressor-2 with DVD Best Quality, 90min 2 Pass 90min. Best motion. GOP closed.
The output i imported into DVDStudio pro.The import was about 4 minute while bevor it was a few seconds!
I did "clean up" DVDStudio Pro removoed the dvdstudio....plist file -> same result
I did start a new FCP projekt with a new Sequenz, imported all the work i have done befor (lot of work)
and used compressor again.
Then i imported with DVD Studio Pro the compressor files
(this time dolby ac3 audio file) and the import was done very quick.
I could burn the dvd (2.3gb instead of 88GB) and a first quick look this (very early) morning was good!
I chosed this way because i am not sure does working with multiple projekts (not sequenzes) can disturbes the other projekts if they use the same movie. So i will continue with a Projekt, finish them, and start the next from scratch. Hope have no problems like this again ...
regards
Sven

DVD studio pro 4 encoding help!!

Hi all, i have a bit of a problem when using DVD Studio Pro 4.
I need to burn DVCPRO 1080i footage of train tracks to SD, however the encoding to MPEG2 within DVD Studio pro 4 at 7 mbps leaves a tiling effect on the tracks. The only way around this that i have found is to convert the clip to SD using quicktime then take it into DVD stuio pro and encode to MPEG2, this works however it is very time consuming and i need the footage to stay in the original format, am i missing something here or does it just not like DVCPRO 1080i footage taken straight into it? Please help!!
Many thanks, Steve

Whether you use DVDSP, Compressor, QT conversion, bitvice, etc., the media will be converted to SD mpeg2 when it goes on the SD DVD. You may find you get better results by using compressor to encode if you turn on the frame controls, which can enable better detail when the image is resampled down to SD. There are several advantages I find in my workflow to using Compressor rather than letting DVDSP do my encoding. If you are really interested, I can spell them out, but try it out and see if you get better quality on your DVD.

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

The request exceeds the maximum allowed database size of 4 GB

I have craeted a user in oracle 10g with following commands
CRAETE USER USERNAME IDENTIFIED BY PASSWORD
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
Grant create session to USERNAME;
Grant create table to USERNAME;
Grant create view to USERNAME;
Grant create trigger to USERNAME;
Grant create procedure to USERNAME;
Grant create sequence to USERNAME;
grant create synonym to USERNAME;
after that when i want to craete a table i got following error
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
00604. 00000 - "error occurred at recursive SQL level %s"

Error starting at line 1 in command:
SELECT /* + RULE */ df.tablespace_name "Tablespace", df.bytes / (1024 * 1024) "Size (MB)", SUM(fs.bytes) / (1024 * 1024) "Free (MB)", Nvl(Round(SUM(fs.bytes) * 100 / df.bytes),1) "% Free", Round((df.bytes - SUM(fs.bytes)) * 100 / df.bytes) "% Used" FROM dba_free_space fs, (SELECT tablespace_name,SUM(bytes) bytes FROM dba_data_files GROUP BY tablespace_name) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,df.bytes
UNION ALL
SELECT /* + RULE */ df.tablespace_name tspace, fs.bytes / (1024 * 1024), SUM(df.bytes_free) / (1024 * 1024), Nvl(Round((SUM(fs.bytes) - df.bytes_used) * 100 / fs.bytes), 1), Round((SUM(fs.bytes) - df.bytes_free) * 100 / fs.bytes) FROM dba_temp_files fs, (SELECT tablespace_name,bytes_free,bytes_used FROM v$temp_space_header GROUP BY tablespace_name,bytes_free,bytes_used) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,fs.bytes,df.bytes_free,df.bytes_used ORDER BY 4 DESC
Error at Command Line:1 Column:319
Error report:
SQL Error: ORA-00942: table or view does not exist
00942. 00000 - "table or view does not exist"
*Cause:
*Action:

Project exceeds the maximum allowed content

Please let me know how I can correct this error message that I get when I decide to burn my DVD. (Project Duration Your project exceeds the maximum allowed content duration. You will not be able to burn your DVD).
Thank you;

Hello, Thomas,
Welcome to the discussions!
You will get the 'exceeds the maximum allowed content duration' message if your DVD project exceeds the time limit for the type of burn you have selected.
1. If your project, usually iMovie, is over 2hrs, you cannot burn it to a single layer DVD.
2. If your project is under 2hrs but your menus and submenus' audio and video content is extensive, your project will exceed the DVD capacity.
3. Most commonly, your project is over 2 hrs, but you have selected "best performance" in DVD preferences instead of "best quality." 'Best performance' is for projects that are under 60min, and 'best quality' is for those over 2 hrs. You change this in DVD preferences.
Explanation for the differences (adapted from David Pogue's little iDVD4 pamphlet):
"Choosing best performance for shorter projects allows the DVD app to allot a fixed amount of data to each frame of video, enough to make it look great no matter how many minutes of video it includes(up to 60min) so that a lot of the DVD can end up empty, but the burning process goes quickly and the video looks great.
Choosing best quality allows the DVD app to us all the space on the balnk DVD by analyzing the amount of video included and dividing it into the amount of space available on the DVD so that the amount of information used for each frame will vary from project to project, and it will take longer to burn because of the analysis time. But, it will give 2 hrs of great-looking video per disc."
Does this help??
Post back if you are still having problems, and if so, be specific in what you are trying to do and what is not working.

Layer 0 exceeds the max layer

When I try formatting a dvd I get the message: Layer 0 exceeds the max layer size allowed please choose a suitable marker location that will support this condition.
I brought in a 2 hour and 45 minute vcr video and added chapter markers. Does this simply mean the size is too big or what is it looking for?
Thank You

DUAL LAYER BREAK POINTS
Basically when burning a DL disc there needs to be something called a "break point" which is effectively a marker at what is considered a "permissable" spot for a break point. The requirements for break points have certain conditions (Layers cannot exceed certain sizes, Layer 0 needs to be larger than Layer 1 etc.) If there is not a marker that meets these conditions, then you will get various error messages.
1.) In a DL disc Layer 0 needs to be larger than Layer 1
2.) A marker needs to be placed as a Layer Break in the project to indicate the layers.
3.) You can start by assuming the marker will be right around the 1/2 point of the disc (give or take)
4.) Find the place which is about 1/2 way and put a few markers in there
5.) Build the DVD to the hard drive then select format. If there is a suitable layer break marker it will be black otherwise it will be gray.
Look [over here|http://dvdstepbystep.com/break.php] has generally the same info and some links for things to look at.
and [this thread|http://discussions.apple.com/message.jspa?messageID=11256039#11256039]

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

Similar Messages

Maybe you are looking for