Help! layers change position from document window to browser window

dear all,
i have a single page site with buttons on which when clicked on show or hide layers.
BUT I have the age old problem in that the layers appear in a different position in the browser window
than where I positioned them in the document window.
Is there a fix? a plug-in?
I am tearing my hair out over this.
What is the use of having layers when they dont work in the end?

First off, code is important.  If you don't post a link to the page in the question or at least the code (HTML + CSS) from the page in question all we can do is guess.
From your statement I would suspect you are using Absolute Positioned divs and you are hoping web design is like print design and you are now realizing it is now.  Best suggestion I could give is read over the HTML and CSS tutorial at the following website:
http://www.w3schools.com/
Then come back here and post a link or the code from the page once you have a basic understanding.  Otherwise our answers to you be as mysterious as your code is to us at the moment.

Similar Messages

  • Help,Layers changing position when grouped.

    I imported a layered JPEG image from Photoshop into Motion 3 (each layer together made up a single image)
    When trying to group some of the layers in motion, the grouped layers alter their position (i.e appear dislodged from the single image.)
    Is there a way i can group layers together without changing their position?
    I've tried holding the Cmd key when grouping (as suggested in the release notes) but that did not work.

    Hi Andy
    Sorry for the late reply.
    What I’m trying to do is to import an image that I cut up into layers Photoshop (like a jigsaw puzzle) and then import that layered Photoshop file into motion.
    The goal is to hopefully create a smashed pane of glass effect, with the image. (you know.. “smash” the image into the created pieces (layers) and have them fly towards the viewer, then reverse animated media so that it forms one image again)
    I got as far as importing the picture as a whole into motion with all the layers creating what looks like a single image. But as soon as I group a number of the layers that form the image together, those grouped layers become dislodged from the whole picture.
    I’m going to try playing with the anchor points as you suggested, and hopeful it may fix it.

  • When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    FingerPrint is not listed as supported on this page: AirPrint Basics
    You might check with the makers of FingerPrint.

  • Framemaker v11 Books unable to clear all change bars from documents

    I have converted all Framemaker v10 documents to v11 by opening and saving. However when opening the Book v11 for these documents and applying the 'clear all change bars' option a book error log message advises that the documents cannot be opened as they are in a previous version! When performing the same function on the individual documents outside of the Book this works fine. But unable to clear all change bars within a book when selecting all the files in one go. Is there a bug with Books in v11?

    My version is FM11.0.0.380 so I will install the patches. I did open all documents up from within the book and then individually saved them, then i applied the 'clear all change bars' and this worked. It just does not seem right that you can clear the change bars from the documents from outside the book but when you try it from within the book it says cannot open document as it was created with a previous version. I have managed to get it working but would be good to know if it is a book bug or not. I will try it on another Book when I have upgraded to the latest patch.

  • Change position of "document links" in query??

    Hi i've got a question...
    how can i change the position of "document links"picture in Bex Analyzer?
    The first two letters are always covered by the document picture....
    Thank you
    Chris

    In edit-mask you can force the position of the minus sign :
    USING EDIT MASK mask
    Effect
    Outputs f according to the formatting template mask.
    Without this addition, f is output in the standard format for that particular type or with a format defined in the ABAP Dictionary. The addition allows you to define a different format.
    You can specify the formatting template as follows:
    '_'represents one character of the field f
    or one digit with type P or I
    'V'only with fields of type P or I:
    output of leading sign
    'LL'at beginning of template:
    left justify (standard)
    'RR'at beginning of template:
    right justify
    '==conv'perform output conversion conv
    ':', ...separator
    (all other characters)
    Regards

  • Changing password from a Windows XP computer for a Mac managed domain

    I've experimented a little with this a did a search but can't seem to find information on it...
    We have an Apple Xserve running OS X 10.4 and I am considering using it to manage a Microsoft Windows domain for our Windows PCs. It seems quite capable of doing that.
    However, I was trying out changing a user password (user and password are from the Apple Open Directory server) from a Windows PC on another domain using the usual method you would do that: username, domain (actually exists on the Apple), old password, new password, etc. There seemed to be something missing as it didn't work.
    Will this only work if the PC is part of the Domain for the username that needs the password changed? You can change passwords across Domains normally if doing this from a Windows PC, in my experience.
    I need to be sure that MS Windows users will be able to change their passwords from their PCs before I move any MS Windows computers on to the Apple Server managed Domain.
    Anyone have information on this?
    Thanks.

    nslookup resolves the DNS name when on both the server and the client MS windows PC.
    I re-started the Windows service on the server and it now shows in the domain and is accessable through browsing the MS Network "My Network Places". So all of that was probably a tangent.
    I've tried the password changing again a few times since but no luck. The server logs seem to show failed authentication for user "admin" but the username I was trying to change the password for was another username. ???

  • Objects in different layers changed position when i opened the project file, why? Can i fix this in a non painful and quick way?

    Im making a frame-by-frame animation and today when i opened my project som objects had changed position while others didn't. This countinues throughout the whole timeline and sometimes they change position.
    Here is before:
    Here is after:
    I think it has something to do with me changing the documents size. But it didnt happen yesterday when i did the change, only today when i opened the file again, and i cant change it back and make things right again.
    If someone knows what happened and if i can fix this it would mean A LOT to me.

    There is really no way around backing up your files regularly.
    Flash is sadly not the most stable program.
    Make it a habit to save a new version every half an hour or so, that will diminish your losses.
    Consider it a "warning shot" and consider yourself lucky that you didn`t get the infamous "flash couldn`t open file" message ;-)

  • My Whole appication gets closed when i exit from Document Window

    I have a MDI Application.
    I have several document windows opened inside that document window.
    Now in one document window i goes in enter query mode. Queries a record. Now when i closes that document my whole application gets closed. In contrary, If i am creating a new record in that window, saves that record or say do not save but quit the document window then my only that document window gets closed. Not the whole application..
    Can u Please Help

    You have to sign into this discussion site with your Apple ID in order to participate. Do you sign in when you are trying to view your responses?
    You should still be able ro read the response, even if not signed in, but you can't respond if not signed in.
    Are you trying to do this with your iPad connected to your PC by any chance? Do I even understand your question correctly?

  • After Effects, Layers change position when converting project from CC to CC 2014

    When we convert some projects from CC to CC 2014 some of the layers are shifting position (both x & y).
    Anyone else seeing this kind of problems?

    Photoshop changed how layer bounds are calculated in some cases, which causes the Photoshop library that we include with After Effects to also have this change. We are currently working to determine how to fix this for the next update. It's tricky, because the new way that Photoshop is doing things is more correct... but it also means that projects created in previous versions look different when opened in the new version. We'll probably end up with a "legacy" option that will prevent this conversion from happening when opening old projects.

  • StarSuite will not start up - help! Changed paths from one drive to another

    Hi all,
    I am using: StarSuite 8
    On an: ASUS eePC 900
    OS: Windows XP
    This is my partner's computer. StarSuite 8 came with it the machine, but as yet she has not even gotten a chance to use it.
    It has two hard drives:
    C: drive is 4GB (with 500MG free), D: drive is 7.5GB (with 6.3GB free)
    Windows, StarSuite 8, and everything else that came with the machine are all on the C: drive (the smaller one), which is why only 500MG are free (she has deleted everything else that wasn't an expensive program or the operating system; most of the 4GB is Windows XP as far as we can tell).
    Previously, when she opened StarSuite 8 (swriter), when a new file would be opened, an error message appeared that said something along the lines of "Not enough disk space free" - i don't recall the exact wording.
    As there where over 6 gigabytes free, we assumed the problem was that StarSuite 8 was somehow being dependant on the mostly used-up C: drive.
    So i went into, i think,
    Tools -> Options
    ...and found a section to change the paths for the folders that StarSuite 8 seemed to be saving to, drawing templates from, etc.
    I found those folders on the C: drive, under "Documents and Settings", copied them (without making any changes at all), saved the copies to the D: drive, replicated the whole file path.
    Then i went back to Tools -> Options and whatever that section is to change the paths. I edited them to point to the D drive rather than the C drive, to my newly created and copied-over files, the paths now looked something like this:
    D:Documents and Setting/Kathryne/Application Data/StarSuite 8/User/ <all the various folders, copied exactly from it's equivalent on the C drive.
    I thought if StarSuite 8 looked at the D drive instead of the C drive, it would stop bringing up the error message that kept claiming there was "insufficient disk space". The only thing i changed about any path was that the letter "C" became "D", and the default folder to which files are saved became "D:Documents and Setting/Kathryne" rather than "My Documents" (because My Documents is on the C: drive).
    I then created and saved an swriter file, as a test to make sure everything was working, and it saved fine. I can still see the file sitting there under "D:Documents and Setting/Kathryne".
    Anyway, my partner (Kathryne, as you can guess), just fired up her eePC, tried to open StarSuite 8 - and nothing happened. It will not open.
    So she right-clicked on a .doc file, selected "Open With swriter", and it worked - the file was opened up.
    But you can't do anything on it. When you hover the cursor over any of the menu buttons, it just turns into a little hourglass and does nothing. Task Manager says that it is "Not Responding", and it will stay like that for ages. It doesn't work at all. I cannot get back into the "Tools" menu to change all the file paths back to their default settings - it just won't let me.
    My normal response would be to uninstall and reinstall, and just erase all the changes i've made that way. But this is an eePC - there is no optical drive on this machine, it was all pre-installed, and uninstalling StarSuite 8 would leave us with no way to get it back.
    Can anybody help me, please? I had no idea changing the paths might make the program non-functional, especially as i copied all of the path folders over without making any changes to them. I thought at the worst i would be able to go back into it and change the paths back to default; and like i said, i saved a test file with it after making the changes, and it seemed to work fine. But apparently I'm an idiot.
    Can anyone rescue me from this guilt?

    1) - it isn't.
    2) I haven't been. Tried it just then to see if anything different happened, but no.
    3) It does. I justdid that, and it seems to have solved the problem.
    It opened up, ultra-fast (faster than MS Office ever has...), and it generated multiple error messages (presumably to let me know that it couldn't find the files it keeps in those folders?):
    "Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/script.xlc/:
    General Error.
    General input/output error."
    "Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/dialog.xlc/:
    General Error.
    General input/output error."
    "Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/dialogs.xli/:
    General Error.
    General input/output error."
    After clicking "Okay" to each error message, i typed a short sentence in the file, and successfully saved it (to the C: drive, even), without seeing any trace of the "not enough space" type messages that used to come up. And after closing the program and opening it again, i haven't seen these messages reappear.
    4) I will tell let her know that it is recommended!
    5) She did this last night, and has been using it in the meantime. I think she still wants StarSuite 8, but she is aware of OpenOffice.
    (6) - I haven't done this, as your suggestion (3) seems to have fixed it.)
    Thank-you very much for the advice and the time you spent in replying, i really appreciate this. Your suggestion seems to have fixed the problem. I am hoping that the error messages listed above won't reappear - i assume that was just the program telling me that the user folders were missing, and that it re-created them soon after? I guess similar messages will appear (and disappear) upon opening Calc and the others, as well.
    The original problem - the error messages relating to disk space - has not re-appeared, i have nooo idea why, but all seems fine for now.Thank-you again for your advice! :)

  • Can I change forus from properties window to main window

    Does anyone know how to change the focus from the properties
    window
    back to the main design window in Dreamweaver 8?
    What I am trying to do is the very common task of repeatedy
    making a
    bit of text into a link. In Dreamweaver 4 (oldskool!) you can
    highlight
    the text, copy it, click on the link box in the properties
    window,
    paste in the text and hey presto, you've got a link. What you
    can then
    do is Alt+tab back to set the focus back to the main design
    window.
    This is really very handy indeed and having to use the mouse
    to click
    back in the design window to give it focus back is a right
    pain in the
    derrier.
    So, have I explained my needs competently? And if so, can
    anyone help?
    I am currently considering going back to using DW4 as it
    makes the work
    I'm going so much faster.
    I'd hoped you could do Alt+W, up-arrow, Enter to get back and
    was then
    going to look into automating that key combo somehow.
    Unfortunately alt+w doesn't work when the properties window has the
    focus.
    Thanks in advance,
    Moonshine Willy

    Hi
    This can be relatively straightforward:
    A bar of 3/2 will be twice as long as a bar of 3/4 (at the same tempo). Convert the Time Sig to 3/4, then "timestretch" all the MIDI regions using the Option tool to make them 1/2 as long.
    CCT

  • Need help to change  prefix from ns1 to tns

    Hi Experts ,
    My scenario is Soap to File ( Sync) . Sender legacy system   is expecting the response message with prefix tns in below format .
    <tns:Data xmlns:tns="com.cad.xyz">
                <HUMLast>00393155961240131287</HUMLast>
    </tns:Data>
    PI is able to send the response message in below format
    <ns1:HumLastRequest xmlns:ns1="urn :cad.xyz">
      <HUMLast>00393155965135748871</HUMLast>
      </ns1:HumLastRequest>
    How to remove Prefix ns1  and add prefix  tns to match the requirement  .
    Expected result :
    <tns:HumLastRequest xmlns:tns="urn :cad.xyz">
      <HUMLast>00393155965135748871</HUMLast>
      </tns:HumLastRequest>
    Please share any code if anyone has already gone through such requirements .
    Note : I cannot use XMLAnonymizerBean at SOAP Sender channel as its a Synchronous scenario and response message need to have  Prefix tns .

    Hi Inaki,
    when i use the above xslt i get the below result
    <?xml version="1.0" encoding="UTF-8"?>
    <tns:HumResponse xmlns:tns="urn :cad.xyz">
    <HUMLast xmlns:ns1="urn :cad.xyz">qwe</HUMLast>
    </tns:HumResponse>
    I am able to get the prefix  tns at root node HumResponse  but i am getting namespace xmls and ns1 at each node .
    do i need to change something in the xslt  code ?
    regards,
    Aziz khan .

  • T.jizdnirady.cz, this site does not recieve my position from GPS, in other browser yes. Fix it pls. it is very important for me, many THX.

    The start position is blank.

    Looks like the link you originally clicked was a scam to get you to submit your username and password.  I reckon the email from Google was legit (because it did not ask you to enter your username and password, but advised you to change your password.)  So it looks like they did actually block a sign-in attempt.  Sometimes, scammers do send out emails like this, but they are the ones which ask you to sign in again (because it's those details they are after).
    Given that you've changed your password three times you should be safe.  The golden rule is never submit usernames and passwords when prompted from an email - it's almost certainly a phishing attempt designed to get hold of your details.

  • Changing platform from Windows to Mac - do I need to purchase a new license?

    I am contemplating changing over from a Windows based computer to a Mac.  I recently upgraded from LR2 to LR3.  Do I need to purchase a new license?  How do I install my existing license no. on the Mac since I selected Windows when I upgraded.  Thank you.

    You do not need a new license or a new serial number.  Just download the Mac version and use your existing serial number.

  • How do I sync my data from a windows phone to an iPhone 4 iOS 7.1.2

    i need help syncing my data from a windows phone to a iPhone.

    Assuming you have your Windows Phone data synced to Microsoft's Outlook.com, or even Gmail,
    You can setup the Outlook.com or Gmail account in Settings->Email, Contacts, Calendars->Accounts->Add Account
    And it will download all data from there. Email, contacts, etc..
    Other than that, you will have to export all your data from the Windows phone, and then use iTunes to Sync whatever is relevant onto the iPhone.

Maybe you are looking for