HELP!! Lenovo Q150 - Stuck at pre boot: "To interrupt normal startup, press ENTER"

Please help, my ideacentre Q150 got at stuck at preboot screen with Lenovo logo and message "To interrupt normal startup, press ENTER"
It started after I uninstalled 'Avira: Antivirus' that prompted me to reboot the system. Right after the shutdown and reboot, the system got stuck in pre boot screen.
No matter what I did, I could not get past this screen: I tried following and nothing helps:
1.) Repeatedly mashing Enter, F1, F2.. all function keys (I use the mini wireless keyboard N5901)
2.) Removed HDD
3.) Removed RAM and put back
4.) Removed CR2032 battery
Nothing helps. I bought this on 12/01/2011 and never had a problem until yesterday.
Please someone help!!!!

Any suggestions? Anyone from Lenovo?

Similar Messages

Hardrive Icon interrupts normal Startup - Please Help

Tonight upon starting my macbook, instead of the normal startup process it instead stayed at the gray screen and in place of the Apple symbol and the loading icon, there was a picture of the Macintosh HD with the word "Hardrive" under it. I turned the computer off and restarted, it started normally as it has always done. I've had this laptop for a year and a half and it has not done anything like this, it has in fact been the best computer I've had so far. Please help me, these things make me very uneasy and I worry about fixing them.
PS: I only really found one post with an almost identical case to mine that was posted back in December. Some theories in that thread included loose hardware inside the laptop, or for whatever reason the computer not knowing where to boot up from. I just got done with a 2 hour trip in the car that had a few bumps along the way - could this have caused the problem? Again, hope to hear an answer soon. Thanks for any help.

No USB keys, no DVD's connected either?
I recall the OLD OS 6-9 would have a similar situation when a faulty HDD or Mount issue occurred.
Try to repair the internal HDD with the DVD, or there should be a way to boot-up with no extensions or startup items.

[HELP] A300 Desktop Stuck at Windows Boot Manager Page

Hi Community,
I was trying to restore my desktop back to its orginal factory settings but through the process, it encountered an error and the system restarted. When the desktop is back on, the only page it offered was the 'Windows Boot Manager' page (As seen in the picture below). It says to insert the Windows Installation disc which not only do i not have, but also the A300 desktop does not have a disc/disk drive for me to insert any disc.
I have googled for any solutions but all of them require me to insert the disc which i clearly have no ways to do so.
How am i suppose to proceed from here to get my desktop working again?
Thank you in advance for any kind responses.

Hi lyl
The hard disk MBR seems to be corrupted
Kindly boot the desktop into BIOS by pressing F1 key and then press F9 to load default settings and after this press F10 to save and exit.
Check if the system works or recovery from hard disk runs, to run the recovery after the system power on press F2 key and check if the recovery works fine.
If the issue continues then you may need to contact the support center.
Country or Region
Language
Telephone number
Hours of operation
Supported products
Singapore
English, Mandarin
18008185219
9 am - 6 pm Monday - Friday
9 am - 3 pm Saturday
IDEA Products
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HELP! OS X won't boot - Blue Screen at startup... No mouse, nothing...

I have a PowerMac G4 MDD running OSX 10.4.8 (or 9)... About a month ago, it suffered a kernel panic, and upon restarting, it wouldn't load OS X. Now whenever I start the computer, it displays the white screen with the Apple logo and the spinning gear, then it switches to a solid blue screen and stays there. There is no mouse on the screen and the keyboard is unresponsive.
The computer will boot in safe mode. I have tried removing login items in the account preferences and third party items from the StartupItems folders. But still, I get the blue screen.
I've tried resetting the PRAM. I booted from the install disc and repaired the startup disk. It said no repairs were necessary. I've repaired permissions on the disk as well. I also booted from the Hardware Test disc, but still, nothing.
Yesterday I did an Archive and Install from my Tiger install disc, hoping that this would fix things, but it didn't. As a last resort, I'm considering wiping the hard drive and doing a fresh install of OS X.
Does anyone have any advice? Has this happened to you too? Does this sound like a hardware or software problem?
PowerMac G4 MDD Mac OS X (10.4.8)

Do you have a firewire external drive, or other bootable backup? Try booting from another drive & see if the problem persists. Run Disk Warrior while booted from its CD, or from an alternate drive. I don't think it will help, though, because Archive & Install should create a new directory. If the problem persists when booting from an alternate system, you most likely have a hardware problem. You could install a fresh copy of OS X on your alternate drive to make sure (but not if it's your only backup!).
Power Mac G5 Dual 2.7 Mac OS X (10.4.9) 4.5 GB RAM, 74 GB WD Raptor Boot Drive, 30" ACD

Cannot Interrupt Normal Boot on my X1C

First post and I'm a little paniced so sorry if it is elsewhere on the forums. I have an X1C and am trying to boot into the bios but pressing enter does nothing to interrupt normal boot. I've removed all USB devices, tried it with and without A/C. I'm at a loss. I believe it has rapid start but I think you have to get into the BIOS to disable and I can't. Does anyone know what's going on and how I can fix it. Thanks!

Hello and welcome,
Have a look at this thread and the link in it: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Entering-X1C-BIOS/m-p/1002229/highlight/true#M...
The time window for hitting enter is very narrow. Start spamming that key as soon as it (re)boots.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

(problem, emergency) Lenovo S650 Stuck at boot animation/image after system reset.

Hello as the title says I made a full system erase/reset from the recovery mode (power + volume up + volume down) and now the phone stuck at the boot animation/image. Please somebody help me I am in hurry and this is an emergency! model: Lenovo S650firware: 4.2.2 stock Thank you!

pls help me https://forums.lenovo.com/t5/S-and-Vibe-X-Series-Smartphones/hello-im-have-proplem-in-my-lenovo-s650-pls-fix-it/m-p/2133943

Lenovo B590 stuck on Boot Menu

Hi,
I am having an issue with a Lenovo B590 which is stuck on the boot menu:-
I have checked the HDD with a couple of utilities and it looks fine. Has any one come across this?
Thanks
Mark

Hi Spen,
my first question would be,
Are you running the latest BIOS version ?
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

HT4059 Can someone help??? I pre-ordered a book in Ibooks and now it is stuck in downloading mode

Can someone help??? I pre-ordered a book in Ibooks and now it is stuck in downloading mode

Hello heidi67,
We've an article that can help get the download resumed.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
Cheers,
Allen

Changes the LCD density on my Lenovo S6000l and now im stuck in a boot loop

I used a program called LCD Density to change my dpi from 160 to 200.
It asked me to reset and i did and now im stuck in a boot loop.
Anything that i can do to fix it.
I did a factory reset but that didnt worl.
Please, i dont know what to do.

I'm sorry this is still happening crimsong19! If you have the Extended Warranty, it's for the life of the phone as long as it's activated on your line. However, if you remove the battery, like you said, it will void the warranty. At this point, you can try reaching out to Motorola to see if they can better assist with this. They may have a good solution. You can reach them at http://www.motorola.com/us/home
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Ipod is stuck in apple boot up mode please help!

My son was trying to erase his content on this old ipod touch and it is now stuck in the boot up mode. If we try to reset by holding sleep/hold buttons it will look like it is trying to boot up and then spinning gear will stop. Then later it will restart again but nothing ever happens. This has gone on for over 5 hours. Tried hooking it up to computer to restore thru iTunes but would not recognize ipod. Any way to fix. Would really like to get this working so I can use it.

Try reading this: http://support.apple.com/kb/HT1808

Help: Lenovo N500 will not start, product recovery disc won't run

Hi. I am a bit of a laptop dunce so excuse me. My Lenovo N500 has been shutting itself down and not always restarting and the last time I tried a reinstall through the on board system but after a day and a half it was stuck and not changing so I turned it off. Clearly a mistake.
Now when I try to turn it on I get a black screen
File:\Boot\NCR
Status 0xc000000f
Info An error occurred while attempting to read the boot configuration data
It says to insert Windows installation disc and restart but that just circles back to same screen. I have tried the 2 supplied disks. One called "product recovery CD for lenovo N500 Type 4233" (which is the right one I think) and one called "Rescue and recovery disc for use with Microsoft Windows XP" (pretty sure I have Vista and this disc was supplied for people who wanted to get back to XP.
I have tried pressing F8 and F11 to no avail (makes a nasty loud hissing sound).
Any ideas?

hi Cj75,
Can you try if the computer have the WinRE Active
Keep on tapping the F8 key once you power on the system. Then select the Repair your computer option from the boot menu that appears.
WinRE photo (http://media.bestofmicro.com/win,B-8-177956-13.jpg)
If You were able to boot to WinRE
>In the System Recovery Options dialog box, Try running system restore first to a known good Date where your system state was fine.
If system restore fails.
>Try to do this to manually rebuild the BCD
In the System Recovery Options dialog box, click Command Prompt.
Type BOOTREC /FIXMBR, and then press ENTER.
Type BOOTREC /FIXBOOT, and then press ENTER.
Type BOOTREC /REBUILDBCD, and then press ENTER.
If this still failed I believe you really have to Reinstall Windows on this
Try contacting Support in your Are to Order a recovery CD (Fees may apply)
IDEA-branded and
B, C, E, G, H, K, N, Q, V, Y Series Products
English
0844-249-1112
(5 pm from BT landlines)
9AM - 6PM
Monday - Friday
Best Regards,
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Setting Pre-Boot time out

I own a marvellous Ideacentre A310 which shows me a pre-boot blackscreen with LENOVO logo for 30 seconds. Anyone has an idea where to touch in order to set the time to less seconds.
thanks for any help
Herbert Sitges/ Barcelona

The "pre-boot screen" is there while your programs-start iems start loading. My A310 loads to desktop ready in 25 seconds.
I have an SSD hard drive and only four items loading at start up. I'm running Windows 7 64bit and my A310 is over a year old.
As far as I know, there is no changes to be made for the splash screen. I will go to Bios and set it to default/optimal performance. Disable lan boot agent, unless you need it.
You also can go to MSCONFIG, and go to selective start up and disable items no necessary at startup. Lenovo screen saver, Adobe among others, are thing no needed at start up.
If items that you've disabled cause you any problems, you can always re-enable them. One more thing you can try to test, is start in diagnostic start up, and see what your boot times are.
Let us know if you make any progress.
Cb2011

S90 stuck at the boot screen

My S90 is stuck at the boot screen. It shows the booth screen for hours now. If I switch the power button it will not swtich off the phone, but restart it again to the boot screen. What should I do with it? I considered that I could let it run out of battery, but I am not sure how much the phone can run on a simple booth screen with just the lenovo log on the screen. Also not sure if once I recharge it would not have the same problem. Any advice how to solve this?

I have no idea how it got stuck at the boot screen (the one after powered by android). The phone was out of battery, I connected it to the charger, immediately turned it on, and it got stuck. Draining did not help so I tried to fully charge it. That did not help. It was stuck at the boot screen until 5am (local time) so I had to follow the other instructions. That got me to a menu that let me choose the language between English and Chinese. Then I could reboot the device, power it off, install updates (or something similar), or wipe up device. Reboot or Power still got me back to being stuck at the boot screen. Install updates did not work. So I had to wipe up the data. That gave me two options (a) fuse wipe up data and (b) fuse format data (or something similar). No idea what the difference is, or what that does, but I was worried I will loose all my photos stored on the phone. But since I had no choice I decided to press "fuse wipe up data". That seems to have factory reset the phone. It started normally and it appears as after a factory resent (all my own apps and settings are gone). I had to pick the language and agree with Lenovo license agreement, etc. However, for some reason, all my photos were still in the phone's gallery (why?), so I am now copying them to the pc. So that's how far I got so far. Thanks for your very valuable help and advice. Let's see if I encounter any more issues with it or any other peculiarities.

Lenovo g510 stuck in lenovo splash screen

I bought this g510 less then a year ago without an OS.
I've installed win7 first then ubuntu14.04, back when i get it.
Yesterday I deleted my win7 partition and reinstalled a premium sp1 win7 version from a usb formatted as NTFS - as you might have guessed I'm booting the laptop in legaci mode. The installation got stuck and failed and i had to do a hard reset.
After the hard reset the laptop won't boot and in fact it won't even pass the splash screen or respond to fn+f2 or any other shortcut to get into the bios. Even when i shut it off and press the Novo button it starts but doesn't display the blue utility menu with bios and boot options. Ive tried pressing the power button for 30 seconds witn the battery and power cable disconnected and tried to boot from usb but still nothing.
I then took the hard drive out and the laptop would boot and respond to novo button and fn+f2 and i can go into bios. It would also boot from usb when the hdd is disconnected. But it dosen't matter which bios settings i change or if the bootable usb is connected, when i hook the hdd back the laptop will just get stuck on lenovo splash screen again and won't respond to Novo button or fn+12 and it won't boot from usb - i should mention it does respond to capslock or the key to make the screen black (fn+f9).
I have a 1TR samsung sata hdd that seems to be perfectly fine. I don't think its the hdd or any of the hardware and the symptoms are not of defected hdd or anything else i've seen before. It 's also not a uefi problem as i've tried legacy and uefi mode with the same results. Also my usb boot is enabled in the bios just in case you're wondering.
This has ruined my weekend and about to ruine my week. Help lenovo please save me....?!?

hi markwills,
Welcome to the Forums.
If using another drive works fine on the G510 then I suspect that the stock HDD is failing or has corrupt partitions.
Can you consider using a 2.5" SATA enclosure to convert the stock HDD into an external drive and try to format the drive and/or run a hardware scan on it using the following:
- Lenovo Storage Test or
- HD Tune.
- http://www.hdtune.com/faq_1.html
When finished, try to insert it back on the G510 and observe.
If you get errors on the scan or if the above step is not possible, I recommend you contact warranty support on how to go about getting the unit serviced.
Support phone list
Similar thread:
G500 stuck on lenovo screen
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE due to inactive object

Hi ,
SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE with the following errors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REPACHK ERRORS and RETURN CODE in GET_INACTIVE_SAP_OBJECTS.SMG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETG040 Start time.....: "17.06.2014" "00:13:43"
4 ETG039 -------------------------------------------------------------------------
4 ETG010 "533 inactive objects found" " " " " " "
4 ETG010 "257 inactive SAP objects" "colliding with import queue found." " " " "
4 ETG010 "Please contact the development team" "to either activate or discard the inactive object." " " " "
2EETG010 "The following objects are inactive" "in the system:" " " " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCDEF" " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCIMP" " "
2EETG010 "LIMU" "CINC" "/1WDA/CBUSINESS_GRAPHICS======CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_AC_CUSTOM_TEMPLATE=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_AC_MO_TEMPLATE=============CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPUB" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CINC" "CL_AC_TEMPLATE_REPOSITORY=====CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CINC" "CL_AI_SC_REFRESH==============CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_GENERIC_DATALOADER=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCDEF" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCMAC" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRO" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCDEF" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCIMP" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCMAC" " "
2EETG010 "LIMU" "CLSD" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRI" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRO" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPUB" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPRI" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRO" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPUB" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CLSD" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CLSD" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "CPUB" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM008" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM009" " "
2EETG010 "LIMU" "CLSD" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CLSD" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CPUB" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CLSD" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CPUB" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CLSD" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CLSD" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CLSD" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CLSD" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CLSD" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CLSD" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CLSD" "CX_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_CRM_CPY_PROCTYPE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPRI" "CL_ALRT_SELF_MON_LANDSCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPRI" "CL_E2EEFWK_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRI" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRI" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPRO" "CL_AC_ASSIGNMENT_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPRO" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRO" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CPUB" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPUB" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPUB" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPUB" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CPUB" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CPUB" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPUB" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPUB" "CX_E2E_DPC_SETUP" " "
2EETG010 "R3TR" "ENHO" "AGS_GET_JOB_DOC_ATTR" " "
2EETG010 "LIMU" "FUNC" "AGS_DSWP_SOLMAN_INFO" " "
2EETG010 "LIMU" "REPS" "LAGS_DSWP_REPORTING$01" " "
2EETG010 "LIMU" "FUNC" "AGS_SISE_MANU_NOTE_ACTS" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTIL$02" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTILF07" " "
2EETG010 "LIMU" "REPS" "SAPLAGS_SISE_UTIL" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_DB_UPDATER_REMOTE" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "FUNC" "SMD_DATA_LOADER_ALM" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$28" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADF01" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADU32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADV28" " "
2EETG010 "LIMU" "FUNC" "DSWP_CI_GET_OBJECTS_BY_GUID" " "
2EETG010 "LIMU" "FUNC" "DSWP_CREATE_SOLUTION" " "
2EETG010 "LIMU" "FUNC" "E2E_STAPI_EXTRACTOR_CE2_V2" " "
2EETG010 "LIMU" "REPS" "LE2E_FUNC$33" " "
2EETG010 "LIMU" "FUNC" "E2E_TWB_POST_DATA_LOADER" " "
2EETG010 "LIMU" "FUNC" "FM_UPD_DELIVERY_AFTER_IMPORT" " "
2EETG010 "LIMU" "REPS" "LAI_UPDATE_CONTENT$01" " "
2EETG010 "LIMU" "FUNC" "SMSU_CREATE_TEMP_RFC" " "
2EETG010 "LIMU" "FUNC" "SMSU_MANAGED_SYSTEM" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$03" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$04" " "
2EETG010 "LIMU" "FUNC" "SMSY_GENERATE_RFCDEST_W_USER" " "
2EETG010 "LIMU" "REPS" "LSMSY_GENERATE_RFCDEST$07" " "
2EETG010 "LIMU" "FUNC" "SOLAR_BUSINESS_CONT_DISP_ALV" " "
2EETG010 "LIMU" "REPS" "LSOLAR05$33" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_ECTC" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_TWBC" " "
2EETG010 "R3TR" "INTF" "IF_ACE_METRIC_EVENT_FILTER" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "R3TR" "INTF" "IF_AI_SC_UTIL" " "
2EETG010 "R3TR" "INTF" "IF_ATW_METRIC" " "
2EETG010 "R3TR" "INTF" "IF_E2E_EFWK_SETUP" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_CC_INCIDENT_DETAILS" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_INCIDENT_FAVOURITES" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_RBE_IMPORT" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_WORK_DVM_SCH_ANALYSIS" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_TABLE_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_UI_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_SELF_MON_OVRVIEW" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_CONFIG_WIZARD" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_ALERTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DFLT_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_HIERARCHY" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_INCIDENT" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRICS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRIC_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_MONOBJ_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_NOTIFICATION" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_REACTIONS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_RULE_TYPE" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_ALRT_MEADEF_CTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_SISE_CUSTOM_TMPL_CONF" " "
2EETG010 "LIMU" "METH" "CL_ALERT_HTML_REPORT_GENERATORCM002" " "
2EETG010 "LIMU" "REPS" "AI_BPMON_FIX" " "
2EETG010 "LIMU" "REPS" "AI_CRM_IM_UPDATE_FROM_SAP_C01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_F01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_TOP" " "
2EETG010 "LIMU" "REPS" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "REPS" "CRM_DNO_SERVICE_MONITOR" " "
2EETG010 "LIMU" "REPS" "LDSWP_BPM_FUNCF08" " "
2EETG010 "LIMU" "REPS" "RLMDB_TECH_SCEN_DUAL_STACKS" " "
2EETG010 "LIMU" "REPS" "WDAL_URD2_BUSINESS_GRAPHICS" " "
2EETG010 "LIMU" "WAPP" "BSPWD_BASICS SCRIPTS.JS" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_DELTAHANDLIN" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_KEYBOARD.JS" " "
2EETG010 "LIMU" "WDYC" "AGS_CC_INCIDENT_DETAILS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_INCIDENT_FAVOURITES COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT IMP_FLOW_CONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_WORK_DVM_SCH_ANALYSIS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS V_SCOPE_SEL" " "
2EETG010 "LIMU" "WDYC" "POWL_TABLE_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "POWL_UI_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_ALRT_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_SELF_MON_OVRVIEW COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_CONFIG_WIZARD COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_CONFIG_WIZARD MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_ALERTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_ALERTS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER METRIC_GROUP_VARIANT" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DFLT_TEMPLATE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_HIERARCHY COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_INCIDENT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_INCIDENT MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRICS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRIC_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_MONOBJ_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_MONOBJ_DETAIL MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_NOTIFICATION COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_NOTIFICATION MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_REACTIONS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_REACTIONS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_RULE_TYPE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_RULE_TYPE MAIN" " "
2EETG010 "LIMU" "WDYC" "WD_ALRT_MEADEF_CTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WD_SISE_CUSTOM_TMPL_CONF COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_DVM_AFWK_LOG_VIEWER MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_INCIDENT_FAVOURITES VWWATCHLIST" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_AS VW_AS_TREE_TABLE" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_IMPORT V_LOG_COMP_MAP" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_CHANGE_REQS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_ISSUES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_MSGS_EODS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PARENT_OBJS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PROCESS_INFO" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_SERVICES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_TASKS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT WND_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_SERVICES_ENGAGE VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_OPERATION_CENTER V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_TWB_SETUP V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AI_SERVICE_CONNECTIONS TREE_CONTROL" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER2" " "
2EETG010 "LIMU" "WDYV" "WDC_ALERT_GROUP_DETAILS EVENT_GROUP_VIEW" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_CUSTOM_AGS V_BW_SYSTEM" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_SS_GUID_PROC GENERIC_POPUP" " "
Any help to fix this issue.
Rg,
Karthik

Hello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB

HELP!! Lenovo Q150 - Stuck at pre boot: "To interrupt normal startup, press ENTER"

Similar Messages

Maybe you are looking for