Help! Lenovo x61 Tablet Prompted Message on device installation

Hello! I own a x61 Tablet laptop and I just upgraded my hard drive from 120GB to 300GB. I installed Windows Vista Ultimate 32bit and everything installed fine. But now I get this message box everytime I start my pc or restart:
Device Software Installation
Windows will now finish installing software from the manufacturer of this device:
ThinkPad Tablet Keyboard and Buttons
Then I have a choice:
Finish installing software(recommended)
Ask me again later
I choose Finish installing and I still get the prompt everytime I start my computer.
Does anyone have this problem? Any help would be greatly appreciated.
Edit: Nevermind this it has been solved. All I had to do was install all the software(even the unwanted ones) for the Tablet Keyboard and Buttons and it stopped prompting. Sorry guys.
Message Edited by junya8971 on 05-07-2009 07:24 PM

In Control Panel select Tablet PC Settings. Select the Other tab and the last option on the page is Tablet PC Input Panel Options. There you should see a link to Go to Input Panel Settings. I think the selections you want appear on the Opening tab.
I could not find a more direct path to it, but perhaps someone else might simplify it.

Similar Messages

PScs4 and Lenovo x61 Tablet Detection

Hey,
I currently have a Lenovo X61T Tablet PC and I am testing out Photoshop CS4.
When I try to set the brush to be pressure sensitive I get the little "!" icon displayed saying that I must have a tablet installed for this feature to work.
I also have the FREE program of “Paint.net” installed on this tablet pc and that is able to detect the pressure sensitivity perfectly. So I would have thought this would rule out any driver issue as the functionality is working its just that Photoshop doesn’t seem to detect it and enable it.
Does anyone have any ideas / suggestions?
Cheers

Bump

HELP! X61 Tablet Bluetooth and intern mic with Windows 7 RC

Hello,
I have currently installed Windows 7 on my X 61 Tablet, model 7767 BFG. I can say it works much better than Vista. Only prob is that my Bluetooth hardware cannot be used anymore (it is not detected). Does anyone has an actual driver for this hardware? Do I have to set up any settings?
Also my intern mic does not work correctly. It is installed and detected as High Definition Audio but the mic sound input is too weak to use it for Skype etc. I tried to push up the input level up to 30 db. Does not work. Has anyone an advice?
Thank you in advance.
Bye.

It appears your MacBook is not compatible with 64 bit Windows. Perhaps you would have better luck with the supported 32 bit version of Windows.
These Mac computers can use 64-bit editions of Windows Vista:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro (15-inch, Early 2008) and later
MacBook Pro (17-inch, Early 2008) and later
Mac Pro (Early 2008) and later
http://support.apple.com/kb/HT1846

Lenovo X61 has no wireless and no pressure sensitivity! Help!

I bought a refurbished Lenovo X61 computer and restored it back to factory settings. Now it's not detecting my wireless at all. When I turn on the switch, it only detects bluetooth. Also there's no pressure sensitivity in any of the art programs I'm using but there is a degree of pressure sensitivity in the handwriting bar. I checked the bios and updated it and it's still going through some updates. I can use the internet but only if I connect it directly to the router. Can someone help me figure out what's going on and how to fix this?

Hi rollinutena and welcome to the community,
If you haven't already done so, install and run TVSU. It should find and install all your missing drivers. The ThinkVantage utilities will also be there if you want them.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT1539 I've burnt a digital copy of 3 blu ray dvds onto my iTunes, but i cant sync them to my iPad-an error message says device needs to be authorized, but its only authorised to this computer, i've never tried to use it on any other! Can anyone help?!

I've burnt a digital copy of 3 blu ray dvds onto my iTunes, but i cant sync them to my iPad-an error message says device needs to be authorized, but its only authorised to this computer, i've never tried to use it on any other! Can anyone help?!

Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

Icannot authorize my tablet. the message is always the same "fail to authorized device"

I am not able to authorize my tablet. the message is always the same"failed to authorize device" I have an Adobe Id and a password. with the same Id and passaword it was easy to authorize the computer. How can I do?

The details will depend on which app you are using on the tablet for reading DRM ebooks.
Bluefire is free and generally pretty reliable, and works on Android and ios.
Several people have reported problems trying to get the Overdrive app to authorize.

HT4137 Hi, I have encountered a problem while trying to update my iOS. I had plugged in my iPhone to the computer and got a a prompt message to download and update my iOS to 8.0.2, clicked yes and the phone has completely hunged up! Can someone help sort

My iPhone was running on the latest iOS 7.1.2 the latest just before the release of 8.0.2
The phone just went blank on me while the download anf update was running, I can now only see the iTunes emblem and a cable plug in on the screen as if the download is still running
I tried switchingoff and on and nothing happens, after it switches off, the same items come back to the screen

Thanks Chris for your advice. I have done the restoration from both the device and computer as a new device but it doesn't help. Even I have restored my device to the factory settings with standard apps in it without installing any other additional apps, the phone heats up & I have to recharge at least 3 times per day. This is abnormal to me.

Any suggestions on creating a new user account please? (thinpad x61 tablet, Vista Business edition)

I would appreciate any suggestions on creating/editing the user account on my second-hand thinkpad X61 tablet (running Vista Business) edition. I bought the laptop from ebay in Germany/Austria. When I switched it on, there were no options to create or edit a username. I have completed all the updates (Lenavo and Windows). I tried the following to add a new administrative account:
1, Control Panel then selecting User Accounts. A screen appears for a second and then disappears.
2. I have also tried typing in sysdm.cpl in the command prompt,
None of the above worked, as the screen does not appear at all. I have also tried allowing the automatic updates on, that does not work either. I was wondering if this is managed by the Think Vantage system. Not sure if this is relevant, the Vista Business language was set in German and I added a language pack via Vistalizator to turn it into English.
Any help with this issue would be appreciated. Many thanks in advance.

Hello,
Have you tried running the Local Users and Groups Manager (filename: LUSRMGR.MSC) to create a new user? If so, were you able to create additional accounts through it?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

X61 Tablet - Windows 7 & Bluetooth - was working - I disabled it..How to re-enable

Ok I suspect I am being dense but I have had bluetooth working happilly enough for long enough and the other day I disabled it via the taskbar icon and thought i could eaily re-enable it later...
Well I know somewhereoin the depths of this OS there is something to re-enable it but I am blowed if I can find it...
This is driving me nuts ..I've been all through control panel / BIOS settings ..everything...and getting nowehere....
Help?
Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7

Sorry to be pulling up this old thread, but I have the same problem. I've been reading every bluetooth entry in this forum and still have no solution for my problem.
I have a X61s with Windows 7 on it. Bluetooth worked fine for 2 years.
After deactivating WAN and BT on my X61s, and a subsequent automatic Windows Update, there is no way to switch it back on.
FN+F5 pulls up a window which only lists WLAN, no longer shows BT and WAN as entries. Device Manager also doesn't list it. I've spent hours on this... no success. There is no Bluetooth entry in BIOS 2.22... I'm stuck
I've even swapped the bluetooth daughter board with the one from my wive's x61T, just to make sure it's no HW issue.
Is there any other way than going back to XP/Vista (don't own either) + old ThinkVantage ToolBox?
Any suggestions?

X61 Tablet with Windows 8 - no tablet function

Hi I have just updated an old laptop with Windows 8 (Microsoft has a great offer right now = it is only a great offer if it works ;-) )
The PC is a: Lenovo ThinkPad X61 tablet 7767.
But I am having issues with the tablet interface. Windows 8 has been designed to tablets...
With the virgin installation, the tablet interface does not respond.
The tablet is found in the Device Manager:
+ Human Interface Devices
HDI-compliant device (3 lines)
Wacom Penable Dual Touch
All control programs are in place, calibration program can be opened, but there is no response from the tablet (pen or touch). I have looked at the lenovo support site, and downloaded various drivers, most with no effect, others caused windows blue screen - which in windows 8 is more light-blue greenish.
I have also Installed ISD_DualTouch_710-9 from Wacom.eu, this gives the most positive result.
Both pen and touch works (no dual touch), but is unaligned (when in a corner, pointer is 2cm from corner x and y. center of screen is aligned)
I cannot calibrate, neither pen nor touch. Running tabcal (from control pannel or commandline) gives 4 popup windows with error messages:
1) Failet to enumerate the installed digitiser devices.
2) No suitable hardware was found to calibrate.\nWindows supports calibrating only integrated digitisers.
3) Invalid display was specified.The Device manager lists the tablet as working:
+ Human Interface Devices
HID-compliant device
Wacom Device
I have tried to find a file holding the calibration; I found a ISDTablet.xml, that looked right, but editing it has no effect and rebooting resets to original value. (The file has a calibration section with coordinates of 4 points)
Secondary, I can't get the buttons on the tablet to work (Ctrl-Alt-Del, Rotate, Toolbox, Esc and cursor joystick).
Any ideas are greatly apreciated ;-)
Casper
Solved!
Go to Solution.

check this topic

Help installing on tablet

I need help installing acrobat reader and flash on my galaxy 2 tablet.

Do you have Rescue & Recovery installed on the old drive? Use that to create a set of Factory Recovery Media. Install the new drive and use the burned media to install Vista to that. Boot the Win 7 upgrade DVD and do a custom/clean install.
[edit] Once you have Win 7 installed, dld and install ThinkVantage System Update for Win 7 and let it pull down the Lenovo drivers and apps. You can select the ones you want to install.
That's how I did it w/Vista -> Win 7 Pro 64 on my T400. You can do a clean install from upgrade media as long as the HD has a previous version of Windows on it. An actual "in-place" upgrade just makes a mess, IMNSHO.
There may be other ways to do this, but you really ought to burn an OEM recovery media set of Vista regardless. Nice to have if you ever want to revert to Vista. Not that anyone would, but you might want to restore the machine to OEM stock and give it to your brother-in-law some day
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

X61 Tablet stops responding to pen

Greetings, all!
I have an X61 Tablet 7767-02U (call it X61 A) that is barely three weeks old. Was working wonderfully until yesterday. When in tablet mode, it will not respond to the stylus (pen) input. Stylus from a second, identical X61 does not work on X61 A. Both stylus pens work on X61 A when not in the tablet mode. Both pens work in all modes on tablet # 2 (call it X61 B). What could have happened to the X61 A, the first tablet?
Pen works when in laptop mode, not in tablet mode. I know it is not the stylus pen, as the stylus pen works on the twin X61 tablet. I removed the WACOM driver from the device list, rebooted, and the driver was back, but still no joy. Ideas?
Thanks in advance!!

I have an update. I haven't found out anything new from Lenovo or Wacom, but I've been tinkering around, observing what happens.
The pen/stylus still freezes once in a while, and I've have not been able to find a "direct" means to "reenabling" it, i.e., I haven't found an explicit source for the problem such as a bad driver, or some button I can do to make the pen/stylus and the laptop start to interact with each other again.
However, (interestingly enough), if I place my note book in "sleep mode," and/or "suspend," then bring it back the pen/stylus relationship is rebuilt/reconnected and it works fine. I've tried this several times when it freezes and it works consistently.
With a little more information about a) Wacom / Pen relationship b) the Wacom / Pen relationship to the notebook c) the "sleep mode / suspend" operation, we could start to piece together what the cause is.
That is to say, what happens when the laptop is placed into sleep mode, vs what happens when it is brought out of sleep, i.e., what operations does the laptop re-initialize when it wakes up?
The bad news is all of this, although, ultimately knowable, is probably too tecnical and/or would just take too much time to figure out. Someone at Lenovo / Wacom, who is more technical, will ulitimately have to figure it out and fix it. :-)
All and all, I'm happy it is still working, apparently some people's stylus just totally stops working.
Thanks again for the update.
man qua man

Lenovo x220 tablet pc with ubuntu 12.04 Shuts down and starts up unexpectedly

Hi
I bought a lenovo x220 tablet pc and installed ubuntu 12.04 with GNOME 3 a while ago.
It was working fine at first however recently:
1. the computer shutsdown unexpectedly, the shutdown dialog appears (the one that gives you the option of restart, cancel, or shutdown); I try to cancel it however the laptop would just power down (without going through the proper shutdown routine). Once it powers down it would try to reboot on its own but halfway during the reboot it would power down again.
2. At times when I do shutdown normally, I would just close the lid and the computer would start back up again, without my pressing the power button (just moving the monitor makes the computer startup)
In addition I dropped the computer on the battery side at one time and cracked the plastic casing a little. The above mentioned problems still exists when I use the laptop without the battery.
Does anyone have any suggestions on how to go about finding out what's wrong and how to fix it.
Thanks in advance for the help.

Hey mate,
sorry to here about that. Here may be a path to the clearing where a possible solution is waiting: Nowadays it is standard to let the pc (or more exactly the power manager of the OS) listen to the ACPI bus for messages like power button pressed and such things. If such a message surfaces and your power manager picks it up it is possible (if you have this configured as an action) that it shuts down you computer or restarts it. To eliminate this possibility you can try one of the following to things:
1. stop your power manager from working
2. get yourself superuser rights and use acpi_listen to listen to the acpi bus (if not working then install "acpid", shut down your power manager and start acpid as service)
3. open your system log (e.g. /var/log/messages) and search for things connected to your power manager or acpi
Please tell me if it worked! If not you could also post the content of your system log for analysis.
Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
"I may not own the world but I own my mind and therefore the world is at my feets." (me)

X61 Tablet buttons not functioning under Windows 7

I have an X61 tablet, and I have noticed that the tablet buttons don't work. I installed the Tablet Button driver for Vista, and I'm not sure what else (if anything?) I need to install in order to fix the problem...
Any advice?
Thanks!
mod edit: split into new thread. title edited accordingly.
Message Edited by erik on 05-22-2009 08:23 PM

There's a beta driver for Windows 7. However it's not working for me either. I'm using Win7 64bit.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA#tbx61

TPM Module / X61 Tablet / Window 7 and Bitlocker

I am sure my laptop has a TPM - at least the device manager shows it and says it is working - I try to turn on Bitlocker by right-clicking on the drive and it tells me I dont have a suitable TPM module installed...
Anyone come across this or do I not have a module installed.????
Sorry but I am confused...also note this drive has only a single partition..none of this service partition stuff..
Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7

make sure you get the right cable. There are 4 choices. They come with or without support for fingerprint reader and with connections for 2 different digitizers. Most, but not all, X61 tablets have G5 digitizers, but some have G4. Try seeing if the leg to the digitizer has just come unplugged. I hafe seen it happen when the cable is stressed from a bad hinge.

Help! Lenovo x61 Tablet Prompted Message on device installation

Similar Messages

Maybe you are looking for