Help library installation in SAP R/3 4.7

Hi All,
I have installed Help library in my server and added the path in SR13- under new entries and given the path of EN.
But when I open the SAP Library it is showing the following error
Could not find file "10.121.4.36\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm" For details please check the entries in the file SAPDOCCD.LOG in the windows directory.
Can anyone please tell me how to proceed in order to access help library
Thanks in advance
Eshwar

Hi all,
can anyone tell me if SAP help library is to be installed in the server or in each individual client system where the sap gui is installed.
Thanks
Eshwar

Similar Messages

SAP Help Library Installation

Dear All
I am struggling to find the software of SAP Help Library to install it on a host and connect to it through SR13 Tcode.My SAP version is ECC 6.0 ,Basis release 7.01.I download and installed but when I launch any Tcode help from SAP it says .CHM file not found ,infact that CHM does not exist.
Can please help me to find the complete software and path to download please??
Thanks
Edited by: Khaiserkm on Jun 27, 2011 8:58 AM

Hello,
Please make sure you followed steps as below...
1. Please go to SR13 and create the variant in HtmlHelp File.
2. Copy the help file (*.chm ) in one folder like C:\helpdata and share this folder.
Then follow this process
Variant             : help
Platform           : WN32_98
Area                : IWBHELP (Documentation)
Path                 :
<Hostname or IP address>\helpdata
Lang.               : EN
Default             : Check
After all setup done then go to main menu Help >> Settings >> Application help. you have to see the IWBHELP in area.
Please check and let me know if you are still not able to set this.
Yogesh

SAP HELP Library

is there anyway to download only the SAP Library for SAP 4.6c?
or is it available in PDF Format? for example SAP Help for MM?

Go to the Below Link and Click on Down load Steps to Configure SAP Help Library
http://www.sap-img.com/b1002.htm
Regards,
Ashok

Confiuration of SAP Help Library Content

Dear All,
I am new from SAP basis. In my office i do SAP Help Content configuration from our own sap server.Its woring fine for internal user.My Problem is One of my colleague working customer place. He using SAP Help Content not visible for him.
I am do the configure Path:
server-IP(Local-IP)\Html\.
Anybody help to me. For external access of SAP Help Library.
Thanks,
Jeeva

Dear Jeeva,
This is acutally a Chinese forum. As I can't move your question to an EN one, could you please create a new
thread in one of the EN forums by yourself? Thank you for your understanding. BR/Tiemin

Repost-- Facing Problems while installation of SAP NW PT 7.0 on Oracle 10.2

Hello Friend,
Sorry Friends, for my last long.....long...Post.....
Here , i m reposting the same matter...Please help.
We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition.
On this host, we already have installed SAP NW CE 7.1 with the same Oracle 10.2
SAP NW CE 7.1 is working fine on this Host.
First, we tried to install SAP NW PI 7.0 with jdk 1.4.2.16(32 bit), which was giving the error, while installation using SAPInst. So We installed jdk 1.5.0.15 (64 bit), at own risk. But, the Installation was interrupted due to some unknown error something like "SDM failed to deploy some components...etc....etc.". So, we installed jdk 1.6.0.6( which is perfect for Windows x64). With this , jdk 1.6.0.6 the last problem did not come and we reached at 9th step (of total 98th step of SAP NW PI 7.0 Installation), and was at "Prepare to install minimal Configuration", and controling START and STOP of System. Bu We found that, the System was not able to even start, at that 95th Phase.
After that, we did lot of R&Ds to come out from the trouble.
I am attaching the requied TRACE files, they are as followed.
dev_disp.
%%%%%%%%%%%%%START of dev_disp%%%%%%%%%
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid PI1
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3132
Thu May 08 16:50:32 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
          o
                + SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 3132) http://dpxxdisp.c 1243
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3902
Thu May 08 16:50:36 2008
          o
                + WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5371
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >vcerp99_PI1_02 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 3966MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 3968MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 991 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 704
argv[0] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=PI1
argv[7] = -DSAPMYNAME=vcerp99_PI1_02
argv[8] = -DSAPPROFILE=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[9] = -DFRFC_FALLBACK=ON
argv10 = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) http://dpxxdisp.c 1633
***LOG Q0K=> DpMsAttach, mscon ( vcerp99) http://dpxxdisp.c 11822
DpStartStopMsg: send start message (myname is >vcerp99_PI1_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu May 08 16:50:37 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu May 08 16:50:39 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) http://nixxi.cpp 4424
          o
                + ERROR => NiIRead: SiRecv failed for hdl 4 / sock 184
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3822) http://nixxi.cpp 4424
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=704)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu May 08 16:51:16 2008
          o
                + ERROR => DpHdlDeadWp: W0 (pid 4316) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W1 (pid 1536) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W2 (pid 3388) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W3 (pid 3980) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W4 (pid 2980) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W5 (pid 4164) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W6 (pid 4656) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W7 (pid 4516) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W8 (pid 2576) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W9 (pid 960) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbf --> 0xbe
          o
                + ERROR => DpHdlDeadWp: W10 (pid 3764) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbe --> 0xbc
          o
                + ERROR => DpHdlDeadWp: W11 (pid 636) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbc --> 0xb8
          o
                + ERROR => DpHdlDeadWp: W12 (pid 3896) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W13 (pid 4696) died http://dpxxdisp.c 14532
                + ERROR => DpHdlDeadWp: W14 (pid 4072) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xb8 --> 0xb0
          o
                + ERROR => DpHdlDeadWp: W15 (pid 4808) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xb0 --> 0xa0
          o
                + ERROR => DpHdlDeadWp: W16 (pid 2832) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xa0 --> 0x80
          o
                + DP_FATAL_ERROR => DpWPCheck: no more work processes
                + DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:26 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu May 08 11:21:26 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4316 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 3388 Ended no 1 0 0
3 DIA 3980 Ended no 1 0 0
4 DIA 2980 Ended no 1 0 0
5 DIA 4164 Ended no 1 0 0
6 DIA 4656 Ended no 1 0 0
7 DIA 4516 Ended no 1 0 0
8 DIA 2576 Ended no 1 0 0
9 DIA 960 Ended no 1 0 0
10 UPD 3764 Ended no 1 0 0
11 ENQ 636 Ended no 1 0 0
12 BTC 3896 Ended no 1 0 0
13 BTC 4696 Ended no 1 0 0
14 BTC 4072 Ended no 1 0 0
15 SPO 4808 Ended no 1 0 0
16 UP2 2832 Ended no 1 0 0
Dispatcher Queue Statistics Thu May 08 11:21:26 2008
===========================
--------++++--
+
Typ      now      high      max      writes      reads
--------++++--
+
NOWP      0      2      2000      6      6
--------++++--
+
DIA      5      5      2000      5      0
--------++++--
+
UPD      0      0      2000      0      0
--------++++--
+
ENQ      0      0      2000      0      0
--------++++--
+
BTC      0      0      2000      0      0
--------++++--
+
SPO      0      0      2000      0      0
--------++++--
+
UP2      0      0      2000      0      0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu May 08 11:21:26 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu May 08 11:21:26 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id      owner      pid      eyecatcher
--------++--
+
0      DISPATCHER      -1      WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:31 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >vcerp99_PI1_02 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (5080) (SOFT_KILL)
Stop icman
killing process (1036) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
DpProcDied Process lives (PID:5080 HANDLE:304)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:32 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process died (PID:5080 HANDLE:304)
wait for end of icman
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:33 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:34 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:35 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:36 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:37 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:38 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:39 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:40 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:41 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:42 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:43 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process died (PID:1036 HANDLE:312)
DpProcDied Process died (PID:704 HANDLE:288)
DpStartStopMsg: send stop message (myname is >vcerp99_PI1_02 <)
NiIMyHostName: hostname = 'vcerp99'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu May 08 16:51:44 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12168
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 212 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 212 (pos=3)
SiSelNRemove: removed sock 212
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 212
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3132) http://dpxxdisp.c 10421
Good Bye .....
%%%%%%%%%%%%%%END of dev_disp%%%%%%%%%
dev_w0
%%%%%%%%%%%%%%START of dev_w0 trace file%%%%
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 08 16:50:37 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 02
M sid PI1
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4316
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4316) http://dpxxdisp.c 1305
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M
M Thu May 08 16:50:38 2008
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host vcerp99
M
M Thu May 08 16:50:39 2008
M calling db_connect ...
C Prepending D:\usr\sap\PI1\DVEBMGS02\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
http://dboci.c 4532
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
http://dbsloci.c 11044
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
http://dboci.c 4532
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
http://dbsloci.c 11044
B ***LOG BV3=> severe db error 1033 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
B ***LOG BY2=> sql error 1033 performing CON dblink#5 @ 431 dblink 0431
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431 dblink 0431
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1440
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10468
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server vcerp99_PI1_02 on host vcerp99 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 08 16:50:39 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 724
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 261
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4316) http://dpnttool.c 327
%%%%%%%%%%END of dev_w0 file %%%%%%%%%%%%
trans.log
%%%%%%%%%%%%START of trans.log %%%%%%%%%
4 ETW000 r3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 08.05.2008 - 17:07:15
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 dev trc ,00000 Thu May 08 17:07:17 2008 0 0.000000
4 ETW000 dev trc ,00000 db_con_init called 0 0.000000
4 ETW000 dev trc ,00000 create_con (con_name=R/3) 0 0.000000
4 ETW000 dev trc ,00000 Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 dev trc ,00000 load shared library (dboraslib.dll), hdl 0 79007 0.079007
4 ETW000 dev trc ,00000 using "D:\usr\sap\PI1\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 25 0.079032
4 ETW000 dev trc ,00000 Library 'dboraslib.dll' loaded 11 0.079043
4 ETW000 dev trc ,00000 function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 254 0.079297
4 ETW000 dev trc ,00000 Version of 'dboraslib.dll' is "700.08", patchlevel (0.144)
4 ETW000 27697 0.106994
4 ETW000 dev trc ,00000 function dsql_db_init loaded from library dboraslib.dll
4 ETW000 21 0.107015
4 ETW000 dev trc ,00000 function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 24 0.107039
4 ETW000 dev trc ,00000 New connection 0 created 18 0.107057
4 ETW000 dev trc ,00000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.107089
4 ETW000 dev trc ,00000 db_con_connect (con_name=R/3) 14 0.107103
4 ETW000 dev trc ,00000 find_con_by_name found the following connection for reuse:
4 ETW000 13 0.107116
4 ETW000 dev trc ,00000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 17 0.107133
4 ETW000 dev trc ,00000 CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 7122 0.114255
4 ETW000 dev trc ,00000 Thu May 08 17:07:18 2008 252994 0.367249
4 ETW000 dev trc ,00000 Oracle Client Version: '10.2.0.2.0' 21 0.367270
4 ETW000 dev trc ,00000 -->oci_initialize (con_hdl=0) 12 0.367282
4 ETW000 dev trc ,00000 Client NLS settings: AMERICAN_AMERICA.UTF8 191178 0.558460
4 ETW000 dev trc ,00000 Logon as OPS$-user to get SAPSR3's password 22 0.558482
4 ETW000 dev trc ,00000 Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 20 0.558502
4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 7651 0.566153
4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 77 0.566230
4 ETW000 dev trc ,00000 Allocating service context handle for con_hdl=0 9578 0.575808
4 ETW000 dev trc ,00000 Allocating server context handle 29 0.575837
4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 48 0.575885
4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 161629 0.737514
4 ETW000 dev trc ,00000 Allocating user session handle 6490 0.744004
4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 39 0.744043
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 130057 0.874100
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.874116
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.874132
4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
4 ETW000 313 0.874445
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 9357 0.883802
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 13 0.883815
4 ETW000 dev trc ,00000 Try to connect with default password 48 0.883863
4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 15 0.883878
4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.883894
4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 19 0.883913
4 ETW000 dev trc ,00000 Allocating server context handle 9 0.883922
4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 26 0.883948
4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 7460 0.891408
4 ETW000 dev trc ,00000 Assigning username to user session 000000000030E728
4 ETW000 19 0.891427
4 ETW000 dev trc ,00000 Assigning password to user session 000000000030E728
4 ETW000 27 0.891454
4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 72 0.891526
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 37125 0.928651
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.928667
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.928683
4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
4 ETW000 313 0.928996
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 18 0.929014
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 9 0.929023
4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1033 performing CON dblink#5 @ 431
4 ETW000 14700 0.943723
4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431
4 ETW000 15 0.943738
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PI1'"
%%%%%%%%%%%END of trans.log %%%%%%%%%%%%%
If u get more trace info, let me know, i will post them one by one.
Thanks in Advance.
Regards,
Shroff Bhavik

I am working on Windows 2003 Server Enterprise Edition x64.
The Processor type is AMD Athelon X2 Dual Core.
Whether JDK 1.4.2 for 64 bit is available ?
I tried Lot of. Ultimately, I installed JDK 1.6.0.9 (for Windows x64 platform).
Anyway,
My Problem is solved.
Actually, in our PC, total 2 SATA Harddisks are installed and , u know that, Control Files of Oracle Instance is created & maintained ,simultaneously, at different location.
One of th HDD , was suddenly dismounted ,due to some technical reasons. origlogA and origlogB are maintained on other (rather than System HDD).
The problems related to version inconsistency of distributed CONTROL FIles occured while working, due to sudden dismount of other HDD.
While the last stage of installation of SAP NW PI 7.0, the START and STOP of PI Server was occurred, but due to previously mentioned error, the Oracle instance (PI1) was not able to start, as the version of Control files was mismatched.
I just notice the alert_PI1.log file , in which this Error was noticed.
I just took one of the earlier version of Control File (that i thought was stable) from one of the location, and copied to the required location.
Then again I tried to restart the Oracle instance of PI1. It worked normally , and the PI1 Server started normally .
Then, I resume the Installation of SAP NW PI 7.0, to complete those last 3-4 steps. The installation completed successfully with JDK 1.6.0.9 (for Windows x64 platform).
Thanks a lot for your cooperations.

Need info for installation of SAP XI on Windows server 2003

Hi All,
I need system requirement ( hardware and software) for the installation of SAP XI 3.0 only on Windows server 2003.
It would be great if anyone can share the installation steps.
Thanks in Advance...
Regards
Venkatesh

Hi venkatesh,
Plesae go through these links.
Procedure to install :
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
A Beginner?s Guide to SAP XI Settings, Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Guide to SAP XI Settings, Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
SLD:
How To?Handle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How To?Handle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

Post Installation for SAP PI 7.0

I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.

Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Installation of SAP Web A S Java 6.40 SP3u0092 at u0091Logon Information' pane

I am trying to install the following evaluation softwares in bold letters from http://sdn.sap.com on my computer. The installation notes comes with the package SAP Web Application Server when I download it. I am following the installation notes as guided. The hardware/software requirements before installing the following are
·     A Windows PC with at least 1Gb of memory and at least 6Gb of free disk-space
·     Microsoft Windows 2000 (at least SP3) or Windows Server 2003
·     Installed Microsoft SQL Server 2000 with all updates that are explained here
·     Installed Sun JDK 1.4.2_04 (Note that there are some known issues with this version. Please use 1.4.2_05 as soon as it is publicly available)
·     Installation target must be a NTFS drive (FAT won't work)
Except for Microsoft SQL Server 2000 I have everything. I am using a Microsoft SQL 2005 Evaluation edition in place of SQL 2000.
1. SAP Web Application Server Java 6.40 SP3
2. Patching of SAP Web Application Server to SP5
3. SAP NetWeaver Developer Studio SP5
4. SAP Enterprise Portal 6.0 SP3
5. Patching of SAP Enterprise Portal to SP4
The URL for Quick Installation Notes is
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/installation guide ep sneak preview sp4.pdf
I get this error when I am trying to run Installation of SAP Web Application Server Java 6.40 SP3 at Logon Information pane.
ERROR 2004-09-03 10:39:35
MDB-05043 Script "->srv_j2ee.sql" not found
ERROR 2004-09-03 10:39:35
MDB-05034 Call to a threaded function returned "1".
WARNING 2004-09-03 10:39:35
The step dAskForConnection with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|MssJ2eeDatabase|ind|ind|ind|ind|ind|0|MssLoginInfo|ind|ind|ind|ind|ind|0|dAskForConnection was executed with status ERROR.
Any ideas on how do I fix this. Do I need a Microsoft SQL 2000 server? Please help me.
Thanks
Rakesh

Hi,
It is always good to go with whatever is specified in the installation guide. So ideally, i would suggest you to go for MS SQL Server 2000, its patches and hotfixes.
But yes, if you want to play around with it, you can just copy srv_j2ee.sql file from a system where SAP WAS 6.30 is already installed and place it exactly where it is required.
Secondly, there are some patches and hotfixes that needs to be applied when working with SQL Server 2000. I am not sure if you have the similar patches and hotfixes for your evaluation version too. Just check up on that at SDN. I am sure, it wont work without the patches and hotfix.
At the end, i would again like to add that this is just a work around and not an appropriate solution. Just give it a try. If it doesnt work you need to use SQL Server 2000 as documented in the guide.
Mark it as answered if this answers your question.

Problem with Plugin Installation of SAP widget Developement tool in Eclipse

Dear All
I am faceing problem while installation of SAP widget Developement tools in Eclipse. Please help me Out.
I have Downloaded Eclipse and also SAP Widget Developement tools.zip
When I try to Install the Plugin for SAP Widget developement I get an error saying "Install has encountered a problem.Cannot Complete the install because one or more required items could not be found". When I click on Detail to see teh details following error log is displayed :
+Cannot complete the install because one or more required items could not be found.
Software currently installed: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
Missing requirement: Structured Source JavaScript Model 1.0.101.v200706071955 (org.eclipse.wst.javascript.core 1.0.101.v200706071955) requires 'bundle com.ibm.icu [3.4.4,4.0.0)' but it could not be found
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner 0.13.0.1376)
    To: bundle org.eclipse.wst.javascript.core 0.0.0
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner [0.13.0.1376]
Cannot satisfy dependency:
    From: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner.feature.group [0.13.0.1376]+
I require your help in this .
Regards,
Nikhil

Hi Nikhil,
Looks like some problem in the eclipse version.
Refer to the last point in this link - [Error while installing SAP Widget Developer tool.zip on Eclipse Java EE IDE; which says -
"The newest and default version of Eclipse is Galileo which is version 3.5.x
According to the Widget development guide, widget developer tool covers Eclipse 3.3.x (Europa) and 3.4.x (Galileo).
The problem is solved by downloading one of those versions from http://wiki.eclipse.org/Older_Versions_Of_Eclipse and installing widget development tools."
Hope this helps.
Regards,
Shilpa B.V

Installation of SAP NetWeaver Gateway 2.0

Dear SAP Experts,
I wanted to install standalone SAP NW Gateway 2.0 for SAP Mobile Platform 3.0.
Can you please help me with required documentation for installation of SAP NW Gateway 2.0 on Windows Server 2008 R2 along with the exact SWPM release which needs to be used for the installation.
I did installed with SWPM by using option as per attached screen shot. Please let me know whether this was a right procedure for NW Gateway Installation or I need to follow something else. After installation I have checked at SAP MMC and found all the processes running. But I am not aware how to access the NW Gateway. Please guide me as I am little new to this area.
Best Regards,
Vishal Jain

Hi Vishal,
Can you please elaborate your requirements for this implementation from your DSD? For me the question is little confusing. Are you talking about integration GW that is part of SMP 3.0?
If you want to install SAP NW GW 2.0 then till NW 731 this is an add-on component. You need to refer to the GW 2.0 master and installation guide from Service Market Place for this. Another option, if you have the opportunity, is to install SAP NW 740 standalone system which actually comprises GW 2.0 within it.
From the screen shot what you have installed is a gateway services engine used to connect to SAP databses in a distributed environment I think this is not the requirement in your case. So you should be going with SAP GW 2.0 product installation http://help.sap.com/nwgateway
Hope it helps.
Regards,
S Sumanth GV

Need help for installation

Hello world,
I´m absolutely new in the world of SAP and just started lessons in ABAP on Netweaver 7.02.
Our teacher told us to install a mini SAP at home for training, so I download this :
SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition
And this is my problem : I never installed a system like this before.
My Notebook have : 2.16 GHz, 8 GB RAM, 500 GB Harddisk
Did I need something else and how can I get it ?
How to start installation ?
Is there any installation guide ?
I'll be thankful for any advice.
Peter

Hi Peter,
This two links are help for installation
Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
http://www.solution-soft.com/whitepapers/SAP/Time-Machine_Windows-2008_SAP-NetWeaver.htm
Regards,
Visu

Installation for SAP Netweaver 2004s stops

Installation for SAP Netweaver 2004s stops - I get the following errors:
ERROR 2008-06-15 05:40:13.406
CJS-00030 Assertion failed: in function (nothrow) { if (nothrow == undefined) { nothrow = false; } NW.trace("NW.getDirProfile(", nothrow, ")"); var retval; if (row.dir_profile) { retval = FSPath.get(row.dir_profile); } else { if (!nothrow) { var pf = this.getPersistentDefaultProfile(); var dirpf = pf.resolveExtended("DIR_PROFILE"); if (dirpf) { retval = FSPath.getPath(dirpf.value()); } else { ASSERT(arguments.callee, false, "DIR_PROFILE undefined: profile not yet loaded."); } row.dir_profile = retval.toString(); this._updateRow(row); } else { NW.trace("NW.getDirProfile() done, returning undefined"); } } NW.trace("NW.getDirProfile() done: ", retval); return retval;}DIR_PROFILE undefined: profile not yet loaded.
ERROR 2008-06-15 05:40:13.406
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-06-15 05:40:13.406
FCO-00011 The step fillTrexContext with step key |rapidinstaller|ind|ind|ind|ind|0|0|rapid_Trex|ind|ind|ind|ind|8|0|fillTrexContext was executed with status ERROR .
INFO[E] 2008-06-15 05:39:54.531
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2008-06-15 05:40:13.390
FSL-02077 File system export (share) sapmnt does not exist.
Please help.

Hello. Check your shares in "computer management" are you see "sapmnt" and "saploc" ? Read this for example Issues in Installing Web AS - Java [ FSL-02077 File system export (share)]
Regards.

Problem on Installation of SAP NW testdrive 7 on Linux!!

Hy, i have started the installation of SAP 7 Linux testdrive but i have received this message:
unpacking sqd_env.tar.bz2
bzip2: compressed file ends unexpectedly
           peraphs it is corrupted)
bzip2: Inappropriate ioctl for device
           Input file = (stdin). output file =(stdout)
It is possible that the compressed file have become corrupted.
After these messages the installation has continued with unpacking other tar file.
I try to open the sqd_env.tar.bz2 but the system has sad to me that the file is corrupted.
How can i resolve this problem?
Thank's a lot.
Sincerely yours,
Andrea Maraviglia

Thanks for the tip - that was my problem exactly!
One of the segments didn't copy correctly and the filesize was off. I downloaded the file again and recombined them into a new .ISO file.   When I mounted .ISO and restarted the install process, I immediately got past the previous sticking point.

Help library installation in SAP R/3 4.7

Similar Messages

Maybe you are looking for