Help light room 3

hi,
i have purchased lightroom 3
every time i try to install [7 times] i get error 1935
an error occurred during the installation of assembly components [ff2f571a-6c54-31e3-b23e-2a60283b08a8]
HRESULT:ox8007054f
i have an open case with adobe but no answer so far.
i have elements 9
cs5 and raw file converter all installed no problem.
so i thought i will seek your help.
any ideas of how to sort my dilemma?
regards bernard

hi .
thank you for replying.
i am on win 7 .
no i have not tried admin/install.
i am not a tech and tend to leave well alone.[if it ain't broken don't try
to fix it.]
i thought i might have a duff disk so i tried to download LR on line from
adobe web site .but ended up with a similar event. so it may be my lack of
computer skill?

Similar Messages

  • Re: help light room 3

    I'm getting the same error, but the numbers are a little different.  Adobe chat has been no help.  In fact, they created additional problems for me.

    Hi Gautham,
    After a very long day of frustration in front of the computer, I am happy to report that LR3 has been installed and appears to be functioning properly.  I was starting to lose hope, but after researching the issues over and over, I decided to follow the instructions on Aaron Stebner's web page.  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subi nacl-tool-to-repair-file-and-registry-permissions.aspx 
    Before I ran SubInAcl, however, I decided to run the System Readiness Tool for Vista,  http://support.microsoft.com/kb/947821  which verifies the integrity of some of the resources, not necessarily "permissions" related, but I knew it would not hurt to run, and it could correct some other inconsistencies.
    I then ran SubInAcl as instructed, and installed LR3 successfully.  I want to remind you that this is the program that I was instructed to run by Adobe chat, but not as specifically instructed on Aaron's web page, which caused my Vista license to become invalid.  I sincerely hope that this resolution will become part of the problem resolution steps offered by first-level Adobe Chat support.  Adobe will save a lot of people a lot of time, hopefully, if this works for others as well as it has worked for me, but Adobe must provide this information at the initial level of support.  The LR3 install problem was, most certainly, related to "permissions," as you had mentioned, previously.  And, as I watched Bobby attempt to resolve the problem, I could see he was consistently denied access to many folders.
    I want to thank you and Bobby Johnson for trying to resolve my issue, even though the problem was related to Vista, and not to LR3.  Without your help, I would have not had a clue on which direction to go in seeking a resolution.
    I just have one last inquiry.  Bobby had uninstalled MS Visual c++ 2008 Redistributable, and was going to re-install, until he started to run into more "permissions," problems.  If LR3 is functioning, is there a reason I that I need to re-install Visual c++ 2008?
    Thank you, so much, for all you help, Gautham.
    Eric

  • Please Help Light room instillation

    Please help,
    I am an adobe creative suite member. When I try to download lightroom from the adobe web page, I get the message:  Adobe genuine software validation failure. The product you are trying to install is not an adobe genuine software and appears to be counterfeit.

    Hi Bink_march1
    Please refer : http://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • I have cc but lights room is coming up with a error ,An error occurred when attempting to change modules. can you help please

    i have cc but lights room is coming up with  ,An error occurred when attempting to change modules. can you help please

    Error changing modules | Lightroom
    Mylenium

  • My light room 5 can't read my files on my iMac and MacBook Pro any help pls

    my light room 5 can't read my file on my MacBook Pro and my iMac I already update my camera raw on ps cs6  any help with this issue pls

    If the error message is “files cannot be read” then this is usually a problem with the destination at the right of the destination import panel.
    If the issue is something different than not being able to import then please give a more detailed description.

  • Error in creating an HDR image in photoshop using light room. Help please.

    Hi so I am trying to create an HDR image using the latest version of photoshop and light room.
    Just finished doing all the steps needed before I select my images and click (edit in > merge to HDR pro in photoshop ) it opens Photoshop and gives me an error saying "Merge To HDR.jsx could not be found." and my files don't open. what does this mean and how do I fix it?

    difficult to reproduce. But it might be a data conversion problem.
    e.g. try
    to_char(a.num_tabs)If that's not the error comment out certain lines or xmltags and test which one is the reason for the error.
    Edited by: Sven W. on Sep 9, 2011 3:13 PM - typo correction

  • How do you transfer Creative Cloud (Light Room & Photo Shop) from your old Desk top to a new desk top

    I have just got a new desk top and I am trying to work out how to get The creative Cloud programs I use (light Room and Photo Shop) off my old Desk top and onto the new desktop. Does any one know how to do this or have already done it, or do you have to cancel the subscription on the old PC and start a new subscription for the new PC.

    Hi Jessica,
    You do not need to cancel the subscription. You can simply follow the article: Creative Cloud Help | Download, install, update, or uninstall apps which will help you to install the Adobe CC application on your new PC.
    If possible you can also deactivate the license from your previous computer using the article: Activation & Deactivation Help.
    Let me know if it works or not.
    Thanks,
    Ratandeep Arora

  • I am having trouble with Light Room 4... Why is it so slow at random Times??

    Problem being that at random when I am going along selecting images or editing, Light Room decides to slow right now and pauses on a picture saying LOADING for a good minute until finally loaded. Light Room is up to date. I have also uninstalled and reinstalled it. My computer is super fast - its Windows 7 with 64GB Ram and LOTS of Disk Space so there is NO reason for it to be acting this way.. cant someone please help me!

    Re AppleWorks, turn off the Recent Items menu in the preferences.
    Is your internet connection through a router a wired Ethernet connection to a Ethernet router or a Airport card connection to a Wireless Access Point (WAP) router?
    I'm not sure why you would upgrade to 10.4.3 when the OS X Update Combo 10.4.6 (PPC) is available. Especially if you're ever run third-party program installers that asked for an administrative password, be sure to run Disk Utility> Repair Permissions on the hard drive after the computer restarts.
    If you normally shut down an OS X Mac overnight or leave it in system sleep, the cron maintenance tasks cannot run in their nominal 3 am timeframe. (Display-only sleep allows the maintenance tasks to run). Tiger 10.4.2 and later will force the maintenance tasks to run after sufficient time has elapsed. Otherwise, you can leave the Mac in display-only sleep a weekend or two a month; you can manually Force Background Maintenance; or you can use a third-party utility such as OnyX to run the maintenance. Note that any system utility you use must be compatible with the OS version (e.g., use the Tiger version of OnyX with 10.4.x).

  • Raw images are not opening in photoshop nor tiffs with light room adjustment

    raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3. need help have client dead line for today and monday..please help. thank you nancy

    I am too tired to go through all this again with an other forum, I also do not have the time, I must hand in my images monday morning...I will wait till you get back to me...it 8pm brussels time..I will continue working in capture one in the mean time... and hope you can find the answer...thank you for you help. sincerley
    nancy

  • Purchased Light Room 5, installed, registered .. but keep getting this screen "An error occurred when attempting to change modules. ... OK" ?? WTF? ?

    Installed Light Room 5.2 from Disc on my mac os x (latest, updated version)
    But keep getting this "An error occurred when attempting to change modules.. OK" no other options/selection and of course if I click OK ... it crashed out ...
    Can anyone help?
    For such a big company .. there isn't any chat option to get to someone to talk to  !!!

    Just because you are the only user on the computer doesn't mean you are the administrator.
    Also, the fact that you are being asked to re-enter your serial number each time you start means that it is not being remembered because something is either preventing it from being written to you disk or (less likely) something is erasing it. This does suggest that you lack certain permissions to make changes to your computer. Not only to save your serial number, but to have access to the Lightroom files needed to change modules (they are just plug-ins within Lightroom).
    Try creating a new user account and run Lightroom from there (making sure that it is part of the Administrator group).
    To get to chat support, you have to choose the options:

  • How to open a Camera Raw Alias open in Photoshop or Light room or Bridge?

    Please Help.
    I have about 20 images that I was trying to Burn in a DVD but , I ended up getting CR2 Alias  files with an arrow at the bottom left corner.
    I want to open the images either in Photoshop CS6 or in Light Room 4 or in Bridge. PLEASE HELP me open the images in jpg. or in RAW.
    Thanks .

    Thank you for your prompt feed back. Here are the details:
    CAMERA USED Canon 5D mark II
    MAC BOOK PRO 10.6.8
    Shot tethered in Light room 4  in RAW
    I was shooting tethered in LR in RAW  , and after the shoot, I was trying
    to burn the RAW files on a DVD R. After a while
    the DVD was rejected by the  built in Optical Drive of my laptop and I am
    left with a folder ( containing all the images) on my desktop and each
    image icon looks like a folded envelope with a small arrow going up from
    the left hand corner  . I erased my CF  card before that, thinking I had
    all the images in my Light room. BUT that was the beginning of the DISASTER
    !! My external Lacie drive, which I was using for storage of my tethered
    photos in LR, also froze.NOW , I am left with only the Alias CR2 icons. I
    dragged them in Photo shop CS 6 , but won't open.
    PLEASE help me open them in any format.
    Thank you very much for your time.
    Regards.

  • I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

    I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
    Alex

    Jim
    Thank you for your prompt reply. Unfortunately I am not that tech oriented and
    cannot easily find that folder. I did notice when I was booting up the LR software
    that I could accept the site where LR usually is set up or choose a place. I am
    thinking that the standard location for LR software is corrupted and that if I
    chose a different place it would work. I say this because whether I use my
    original disc or download from adobe I get the same warning. I have 100GB of
    memory on the hard drive and I have cleaned the computer with Mcaffee and free
    software. What should I do next? I can't use this software and I doubt LR 5
    would open up with my current problem.
    Alex

  • Is there a way to drag, copy, export parent folder shown in light room with multiple child folders to smug mug?

    I have a parent folder called FHS Dance Competition, that contains several folders (one per team).   I have this structure in my computer hard drive which I uploaded with one click to light room.    In the past I've had to manually create each folder, copy the name, drag in the photos, etc.  Very time consuming.    Is there a way to drag or copy, or export the parent folder shown in light room to the lower portion of the screen where the smug mug piece is?

    Ron,
    I too need to make "Real Copies" of images and hate doing anything directly from the OS because of the chance that my LR catalog gets out of Sync with the actual images on the computer.  So I make the copies inside LR with an export routine and then move the copies inside of LR with the normal drag and drop.  Once the export preset is created it can be executed from the Library Grid by right-clicking on the image (or selected images) to make the copies.  My settings are as follows in case you are interested:
    This is the first time I have posted an image before and I am not sure if you will be able to read it or not.  The contents from the export preset in the image above are as follows if that helps:
    s = {
    id = "3AF0E3D2-BC6A-4D53-A7BE-B7A6C4D673AC",
    internalName = "Make Real File Copy",
    title = "Real File Copy",
    type = "Export",
    value = {
    collisionHandling = "overwrite",
    exportFilters = {
    exportServiceProvider = "com.adobe.ag.export.file",
    exportServiceProviderTitle = "Hard Drive",
    export_colorSpace = "sRGB",
    export_destinationPathSuffix = "",
    export_destinationType = "sourceFolder",
    export_useSubfolder = false,
    extensionCase = "lowercase",
    format = "ORIGINAL",
    includeVideoFiles = false,
    initialSequenceNumber = 1,
    jpeg_limitSize = 100,
    jpeg_useLimitSize = false,
    metadata_keywordOptions = "lightroomHierarchical",
    minimizeEmbeddedMetadata = false,
    outputSharpeningLevel = 2,
    outputSharpeningMedia = "matte",
    outputSharpeningOn = false,
    reimportExportedPhoto = true,
    reimport_stackWithOriginal = true,
    reimport_stackWithOriginal_position = "below",
    renamingTokensOn = true,
    size_doConstrain = false,
    size_resolution = 300,
    size_resolutionUnits = "inch",
    tokenCustomString = "RC",
    tokens = "{{image_name}}_{{custom_token}}",
    tokensArchivedToString2 = "{{image_name}}_{{custom_token}}",
    useWatermark = false,
    watermarking_id = "<simpleCopyrightWatermark>",
    version = 0,
    Let me know if you have any questions.
    Jeff

  • Why does lightroom 5 do not read or can't find my raw files when I'm trying to import my images from my camera to light room

    It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!

    I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
    The following files were not imported because they could not be read. (6)
        IMGP7941.JPG
        IMGP7942.JPG
        IMGP7944.JPG
        IMGP7943.JPG
        IMGP7945.JPG
        IMGP7946.JPG
    I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that.

Maybe you are looking for