HELP! Lightroom CC file will not open "edit in" Photoshop CC after upgrade

help! I use Lightroom CC and Photoshop CC and I used to be able to "EDIT IN" and choose Photoshop which would then open up the image in Photoshop. Just updated last night (auto via CC) now it will NOT open in Photoshop...any suggestions! thank you!

Are you using Photoshop CC or Photoshop CC 2014?

Similar Messages

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

Excel file will not open on new air book after file transfer

i transfered through airdrop and email both an excel file which it auto zips and it won't open on my air book in numbers it keeps replicating the zip. Any ideas

Sheri,
Please be more verbose in your explanation of the problem and the steps you are going though. Please replace "it" with the actual thing to which "it" refers. I think "it" changes from one point in your sentence to the next.
To send and excel file via email you should be able to attach it, then send. To open on your mac you can drag the excel file onto the Numbers icon (in the dock).

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Clarification: this is a user forum; you are not addressing Adobe here.
The answer to your question as phrased is: never.
CS5 is history and it is not longer supported. There will not be any updates or bug fixes for CS5.
You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera..

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

My trial ended, now my premier pro file will not open on a different machine (it has opened on this machine before). It is saying the "file is damaged" I don't want to loss my edit, how can I access it?

My trial ended, now my premier pro file will not open on a different machine (it has opened on this machine before). It is saying the "file is damaged" I don't want to loss my edit, how can I access it?

Steven is correct, you never can go back to an earlier version with Adobe Premiere with the project file. If your preceding version was CC you might try the trial version of CC 2014, but remember that once you enter the trial version cycle you never can go back.
There was a way to hack the project file on the CS versions but that disappeared with CC.

Certain IDCS3 INX files will not open in CS2

I am trying to export a group of files from CS3 all the way to CS. Of the 52 files, 11 of my interchange files willl not open in CS2. Of the 41 files that were successfully converted to CS2, 13 of thhe next round of interchange files will not open in CS.
Does anyone have any suggestions for things that I can do to make these files work? For example, when I have had trouble in the past with converting native CS2 files, I have been able to get them to work by remove the master pages and ungrouping all of the objects. With these CS3 pages, the only thing that has worked has been copy pasting all objects into a new document, but I am praying for a better solution.
It would be helpful if anyone could suggest things for me to look out for. So far, I haven't been able to identify any commonalities between my "broken" files.
Thanks!!!

You need to access the version from within InDesign itself, not from the finder. From Indesign CS, hold down the command key while pulling down InDesign>About InDesign. The correct version will be InDesign 3.01 (838). There were I think three versions of InDesign 301. The one with the (838) is the last one which will import the CS2 inx files correctly.
So while your updater may have completed the update successfully, you may not have the latest updater. You need the 3.0.1 April 2005 updater for Mac. (see #13)
Al
Edit: And remember to turn off color management as Bob points out in #3.

Keynote files will not open.

I have all system and app updates for my MacPro. However in each attempt to open a Keynote file we receive a prompt "must upgrade to latest edition of Keynote'. I am using the latest version 6.5.2. Files will not open. Help.

Keynote 6.5 should open all previous version files (except 1 and 2)
Try resetting Keynote; perform all the steps in the order listed:
remove Keynote version 6.5, you must use an application removal tool for this procedure to work:
Appcleaner is free, I use Appzapper
empty the trash
shut Down the Mac (Apple menu > Shut Down)
wait 10 seconds, then press the power button
Immediately after you hear the startup tone, hold down the Shift key,
release the Shift key when you see the grey Apple screen
start up will take a few minutes longer than usual as the Mac is performing a software repair
restart the Mac normally, (don’t hold down any keys during startup)
install Keynote from the Mac App Store

Lightroom 5.6 Error: The file could not be edited because Photoshop CC could not be launched...

I upgraded to lightroom 5.6 recently and i am using photoshop cs 6.
My OS is windows 8 on i5 4670 with R280X gfx card 16gb ram
After editing a photo with lightroom , when I right click to edit in photoshop, immediately photoshop launch but the image isnt imported to photoshop.
After like 30sec an error message pop out saying "The file could not be edited because Photoshop CC could not be launched".
After another 10sec then the photo appear in photoshop... this is getting irritating to me.
if i select to just open the original or a copy of the original it works fine. It only happens when I try to open it with lightroom changes.
I had uninstall/reinstall both photoshop and lightroom as well as remove all the plugins i had, but the problem doesnt go away.
Another issue with lightroom 5.6 is the the adjustment brush is slow and sluggish, it is so unusable when I zoom in to use the adjustment brush.
I didnt had that issue before i upgraded. OMG
anyone have solution to my problem ?

I upgraded to the latest version of ps cc 2014 , problem resolved.
look like cs6 i outdated or something

PDF files will not open in a Safari (v 6.0.5) browser window

PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
Adobe Reader version 11.0.04 is now working for me.
Thanks for the help and the solution C.F.McBlob

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

My InDesign file will not open! URGENT!

Hi all,
One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
You can embed an image in a post using the coamra icon onthe web page, like this:

Mov reference file will not open in QuickTime 7.7.4 for Windows

Hi,
I have a mov reference file which opened fine in QuickTime 7.6.2 but since upgrading to 7.7.4 the file will no open. I get the following error:
Error -2002: a bad public movie atom was found in the movie.
The file contains one PAL MPEG2 video track and one stereo PCM audio track. It also contains a timecode track.
See movie inspector below:
Can anyone help me understand why this file will not open with the latest version of QuickTime. I cannot supply the file but can give any information about atoms etc. which can be read using QTAtomViewer.
I am using Windows 7 and Windows Server 2008.
Many thanks,
Kate

For those who want to call, the following menu options will get you to the Quick Time install tech support:
2 - takes you to the Quick Time submenu
2 - takes you to tech support
then, choose 1 for Mac or 2 for windows
Initially, I was told by tier 1 tech rep Shawn that the update server may not be up or that it may be a firewall issue on my side.
After telling him that I have confirmed that it is a problem with the update server sending a NULL (0 byte) response to the update query, he said I would have to just download the latest one in order to have the most up-to-date version and "just check back periodically to see if the update server is working".
He mentioned there was a Quick Time standalone download available (http://www.apple.com/quicktime/download/standalone.html), but that is still ~20MB & doesn't help the fact that probably over 90% of the people who run Quick Time have the option to automatically check for updates set and will never realize they're running an old, vulnerable version of Quick Time.
He gave me a case number after I asked for one: 58027568
If you'd like to add to mine and/or Rob's, it surely couldn't hurt.
I suppose my next course is to try emailing contacts at apple to see what kind of response they have. Considering this problem has been there ever since QT 7 for Windows has been released (I don't remember ever checking for updates when running QT 7 beta), it's strange that it's still a problem.
hand made system Windows XP Pro

Pdf files will not open upon downloading

I download a lot of pdf docs for work and want them to open automatically upon download so I can screen them. Since upgrading to Safari 5.1, when I download files (which has gotten much more cumbersome) they do not automatically open upon download. Yes, I DO have the "open safe files after downloading" option checked in Preferences. Any other thoughts? A solution would be most helpful. (If anyone has a solution to how I can automatically download files as easily as in prior versions, that would be greatly appreciated also.)

E Denice wrote:
PDF files will not open and eratically opens multiple pages and then the laptop freezes up.
Doesn't make much sense to me. Methinks details are needed.

HELP! Lightroom CC file will not open "edit in" Photoshop CC after upgrade

Similar Messages

Maybe you are looking for