Help Link in Webdynpro Abap Application.
Hi,
I have Created one webdypro Application. For that i need to implement the F1 help. For Implementing the F1 Help, I have created the RFC Destination Aio_for_help_links .
1. I need to check if Knowledge Warehouse is implemented in the System. How do I go with this?
2. How do I connect the created RFC Destination to the Knowledge Warehouse.
I have referred to this link for the creation of F1 help in WD Application.
http://help.sap.com/saphelp_nw04s/helpdata/en/44/336208da18060be10000000a155369/frameset.htm
Regards
Bala..
Hi Pradeep,
Create a search help with the values you require in se11 transaction.
Then assign this search help to the context attribute of your field. This should work.
Assignment is done in the same place that you set cardinality etc.
I don't have access to a system right now, so can't give precise details.
Let me know if you require more help.
Cheers,
Mz
Similar Messages
-
F4 help issue with Webdynpro ABAP application
Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
RamanathHi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc. -
When m testing webdynpro abap application m getting this error help me to get solution
hi all,
when m testing webdynpro abap application m getting this error help me to get solution.
plz find the screen shotHi
I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
In this path you will find in the below path and try to check/activate the services relevant to the WDA stack.
sap/bc/webdynpro/sap -
[HELP] Webdynpro Abap application keeps refreshing on Portal
Hello Gurus,
Im facing a really annoying and weird problem, i've created a screen exit on the transaction IW21, on this screen i have a custom container, and im using the class cl_gui_html_viewer to show off a webdynpro abap application on this container. If i access IW21 via SAP GUI everything works fine, no problema at all. But once we've published this transaction IW21 on Portal something very weird happened, the webdynpro application keeps refreshing on every action done in the screen. I've entered on debug mode to verify if the program is performing the code to create the html object again, but the program pass in the perform only once. An example: when i click in save the program pops a screen to choose some characteristics and i can clearly see the webdynpro application refreshing under this screen, like if i press F5 on browser. As i said everything goes pretty much fine in SAP GUI, but in Portal keeps refreshing.
Anyone have any idea how can i solve this?
Regards,
RafaelAre you calling ITS transaction and Webdynpro application is within this transaction?
Regards,
Nitesh -
How to Call the RFC in Webdynpro abap application
Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit -
Error in webdynpro(ABAP) application development
Hi,
I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
Thanks,
KundanHi,
Can you be more clear...
Please refer this link for Personalization-
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
Regards,
Lekha. -
Call WebDynpro Abap application with trasaction
Hello Experts,
can I call my WebDynpro Abap application with a trasaction ?
Regards
sashi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit -
Iview for Webdynpro ABAP application with TimedTrigger
Hello,
I created an IView for a WebDynpro ABAP application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView this TimedTrigger element does not work anymore. Did anyone have a similar problem? Does anyone have a solution for this?
Thanks and regards
Marchi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit -
Attach Interactive Forum to Workflow from a Webdynpro ABAP application
I have a webdynpro ABAP application which has an Interactive form. After the user enters the form and clicks on 'Submit', I trigger a workflow for Approval. My requirement is to add this same form as an attachment to the workflow. I know I can do this by adding the Fileupload UI element and letting the user browse to the file after saving it. But I want to attach it directly without the user having to save the form to Desktop first.
I tried passing the pdf_source(XSTRING) to the container and it does attaches a pdf to the workflow but when I open it, the form is blank and user entered values are missing.
Please respond only if you know the solution and don't send me links to other forums on SDN, I have read them all.sharing the solution always helps some or the other person seeking similar answers to their problems. It would be good to share your solution in this open community. It helps.
-
Attach File in WebDynpro ABAP Application
Hi everyone
I need your help to attach files in custom WebDynpro ABAP application. Kindly share if there is any sample standard WebDynpro ABAP application or share some sample code.
Best Regards
Iftikhar AliThis question has been answered in following link.
[http://forums.sdn.sap.com/thread.jspa?forumID=249&threadID=2137285]
Regards
Iftikhar Ali -
Webdynpro ABAP application integration with portal
Hi,
Can someone provide me the complete documentation for
1. webdynpro ABAP application development and
2. webdynpro ABAP application integration with enterprise portal.
Thanks...
Kundanhi Kundan ,
design pattern or paradigm followed by Webdynpro ABAP is
MVC concept
M-Model
V- View
C-Controller
and cms with the advantages like Structuring the programming
Creation of easily manageable application blocks
Reusability of whole components
for more documentation about WD ABAP , refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
refer
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
as well
I hope it helps
rgds,
amit -
Error in opening webdynpro abap application
hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AMHi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia -
WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14
Hi,
We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
Will reward points for helpful answer.
Regards
MukeshHi Mukesh,
As Gajendra said, restarting the service in SICF sometimes works for us, but not always. We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
Cheers,
John -
Webdynpro ABAP application on MSS Overview screen
Hi Guru's,
We are having a customized Overview screen in MSS which is all Webdynpro Java application.I am trying to add Webdynpro ABAP custom application link on the overview page.I created a IVEW ,then PAGE, assigned to Workset and then to role .
Copied the PCD location and assigned in the Resources of Homepage framework.
When I do preview it is fine but when I run it through Overview..I am getting 404 page error.
Again its webdynpro ABAP application in the Overview page..What are the steps for it ..I created Area,Subarea ,Services and assigned Resources which has the PCD location with ROLES:// ...
Also in Services I mentioned it as WEBDYNPRO ABAP application.
Please suggest me ay steps I may be missing.
Thanks,
STAlso I was comparing the links through HTTP WATCH that was trying to read:
The first one is from direct page assignment under ROLE in Portal:
http://DEV SYSTEM/sap/bc/webdynpro/SAP/zhr_associate_form/;sap-ext-sid=bNrjr3FDhSA9HxracqUNhQ9H0Rpx1m12qVv5aAWcHbEw
The Second one is referred under overview from Homepage Framework:
http://DEV SYSTEM/sap/bc/webdynpro/sap.com/pcui_gp~xssutils/XssMenuArea/;sap-ext-sid=bNrjr3FDhSA9HxracqUNhQE37DBLWEEK_COBmuSIHeeA
I am for sure missing something ..can you please suggest.
Thanks,
ST -
How to Integrate HCM Process with Webdynpro ABAP Application
hi,
I have issue regarding how to integrate HCM Process with Webdynpro abap application.
I had created one HCM process for transfer using Hrasr_dt T code and also created form scenario and work flow.
How to Integrate HCM Process with Webdynpro ABAP Application
by
Parthasarathihi suhasini,
Thanks for your reply,
Can u explain in detail.. and Give any documents or links...
by
Parthasarathi
Maybe you are looking for
-
Caoture excise invoice for depot
Hi, For our manufacturing plant, we are doing GR and capture excise invoice, in MIGO both at same time then after that posting of part 2 is done with J1IEX post, but in our depot plant, first we are making GR with MB01, then ref. to that GR numbe
-
Router No Asking For Username/Password
Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco. Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at
-
Change Date Format in VC from Mon Feb 20 00:00:00 GMT 2010
Hi Gurus, Could someone please offer advice on how I'd change the following field, Mon Feb 20 00:00:00 GMT 2010 to a simple MON 20 FEB 2010? Thanks, Bim.
-
Formula element ATRV could not be recognized
Hi, Problem in SAP IP FOX Formula. I have to copy the data from one cube to other.Both are planning cubes. I have a customer master YL_AGG1 which has a Attribute YL_COMMU (Ref object of YN_COMMU). Based on other dimensions I have to copy the data, w
-
[VIA] So where's this error message from? KT4V or Windows 98se
Hi, Reference KT4V Series and using windows 98 se. My system has been running fine for a couple of years then one day the following happened. Slow boot up and when I tried to open/close windows applications it was very slow. e.g. click on 'My Compute