Help! Links moving around

I'd appreciate any help.
On my website, created in muse, I created a page that has all the different "link" buttons (about, gallery, contact, etc.).
I duplicated this page and then created content for each page. I did this so that the "link" buttons would stay in the same place for each page.
The problem I am having is that on some of the pages (look at the blog page), all of the "link" buttons shift a little bit to the left. I don't know why this is happening because each page is duplicate of the master.
Does anyone have any suggestions? It looks fine in preview, but when I publish it, it gets screwed up.
please check out the site...
www.jasonjohnson.com
Thanks!
Jason

www.jasonjohnson.com
It appears to have fixed itself. It looks like the links aren't moving around. Maybe it was a cache problem.
Thanks. Let me know if they move around for you.
Sent from my iPhone

Similar Messages

Needing help with moving pictures around

I am in need of help in moving pictures and images around
dreamweaver document window. My older brother gave me his computer
witch has dreamweaver MX (he is in Irag) so i can start building
building my own websites. I went to borders and bought a book on
dreamweaver MX. Here is where I am having a problem with: when ever
I bring a picture into the document window I can not move the
picture around the document window. The book say "place the
insertion point where you want the image to appear" but there is no
insertion point. There is just a straight line as if I am about to
type something. It's almost like I am in microsoft word. If I take
the mouse over the picture , and then left click and try to drag
the picture to the location I want it in, it doesn't move. Can
somebody PLEASE help me out with this problem. Thanks Jical

Nadia gave you a good place to start… Here is what you
have to understand. Web pages are based on specific code that tells
the viewer’s browser how to display the page. There has to be
something that says, “Put this picture in the lower right
hand corner, and center this image in the middle of the
screen”
Then there are further instructions that say “Put this
text here and that link there”. So Dreamweaver (and most
other web developing programs) do not work like Illustrator or
PowerPoint where you can simply grab a picture and slide it around
the page.
In its simplest form you might drag an image onto the
Dreamweaver design view page and click on the center button in the
properties dialog.
Then type in text and center it, left justify, right justify,
etc. Add another picture and so on and you could possibly create a
passable web page. Now click on the Code view button and see what
code Dreamweaver generated in order to do all of this.
That is what you will really need to understand before you
can really get proficient at web design.
At the next level, you can start to add in tables. These
actually are similar to tables in Word. You can put text in one
cell, images in another, colored backgrounds, thick and thin
borders with contrasting colors, and you can start to see how to
“contain” your images as Nadia suggests.
Now look at the code again and see how these cells are
defined around your content.
Once you understand how this works, you will get much more
comfortable with Dreamweaver. You will just have to get used to the
idea that it doesn’t work like all of the publishing software
that is only dependant upon its own format for layout. HTML is
dependant upon the many browsers, computers, operating systems,
user preferences, and a million other unknown factors.
That’s why this forum has more than 91,000 posts…

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

I can't sync my ipod to itunes. It looks like it is going through all the steps to sync but nothing happens. The music I moved around is not going where it should

I can't sync my ipod to itunes. It goes through all the steps to sync but it does not sync. The music I moved around does not go where I put it. It shows up in itunes (when changing music around) but does not change it on my ipod. Can someone help me?

Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
and
Can't connect to the iTunes Store

How to deal with moving around like in gta2?

Hi there,
I'm programming an game but i was wondering how to deal with moving around like in gta2.
my game is also top-down with you(tha player) constantly in the middle of the screen. I know how to deal with button press etc.. but how to calculate how manny pixels the map has to move in the x and y axis...
It's difficult to explain for me.. but hope the picture is clear..
greetings

I was afraid for this one already.. the picture is not clear:) thanx for your response so far.. I will try again.. with the game gta2 in mind:)
see this screenie: http://www.vollversion.de/bilder/705_1_full.jpg
My game looks the same as gta2 top down... with the character in the middle of the screen(the one firing the flame thwower )(the player). if i press up he walks towards the police car.. if i press left or right.. he only turns around(an combination of pressing up and left is also posible) thus the character walks in the direction he's facing.
Now i would like to know how did they do this? how to programm such a movement? Because the character is standing constnatly in the middle of the screen the map has to move like in almost every game... how to calculate the x and y axis movement of the map?
Please.. try agian.. hopefully the screenie will help.

Windows Crashes with JRE 1.4.2 When Moving around JDialog

Hi!
I work on a Java Applet/application that was originally written to run on java 1.1 -- only AWT that too. Recently I managed to convince my manager (and his manager and his manager) to migrate from the AWT framework on java 1.1 (Microsoft JVM that is ) to Swing/JFC on Sun Java 1.4.2 ... it took a lot of explaining, demostrating, begging, pleading etc., to get this project funded.
Now, my app is all developed in JFC and ready for deployment and during testing found a potential show stopper -- When a Dialog Box or any moveable componant (internal windows etc) is moved around (holding down the mouse on the title bar of a dialog and dragging it around), the OS simply froze up ... nothing could be done other than power cycling the PC. Does anyone know if its a bug in JRE 1.4.2 and if it has been fixed?? This could potentially result in rolling back to AWT :(( .... and of course me looking like a fool in front of my manager!!
..... Please provide any suggestion other than moving to JRE 1.5.x beta. I've also noticed this happening in other Java Applications (Netbeans for example). So, I think this is a major bug the JRE 1.4.2.
A million thanks and few Duke Dollars for anyone pointing me in the right direction.
Note:
1. This problem is not just with my app ... some other java apps that are installed on my workstation (like netbeans) behave the same when Moving Around dialog boxes.
2. The behaviour is very random. But it has happened multiple times (and the very first time my manager run our app on jre 1.4.2)
I would give a million dollars if I had them. But for now, please do with the million thanks and few duke dollars.

Have you tried this on another machine?Yes ... actually this has happened on a few workstations here ... all of them are Pentium IV based dell workstations running Windows 2000.
What exact version of 1.4.2 did you download?Java(TM) Plug-in: Version 1.4.2_04
Using JRE version 1.4.2_04 Java HotSpot(TM) Client VM
Have you searched the bug database? This one could be related to yours:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4673572
This sounds similar but the difference is its not just the app that feezes up (so that you could do an alt+ctrl+del and kill it)..... the OS freezes up and you can move the mouse around still the system even queu e is not full and eventuall all I hear is the beeping. At this point I've to power cycle.
Is there any way you could post the code or is it too big? Or, have you tried just creating a very small >application or applet that just shows one dialog, and if so, does that show the same problem? (What I'm >trying to get at here is - is it something in your code that is causing this, or something in the JRE, or >perhaps something to do with your machine's configuration/OS?)Unfortunately I cannot post the code ... its company rules and regulations. I've tried creating a very small app and it appears to work ok .... but randomly causes this freeze up. There is no definate pattern (except that it happens when you move around a JDialog or a JInternalFrame) . It could freeze up some time and work perfectly fine at other times. It has actually happened on other applications too (Netbeans, JEdit etc). That's why I suspect this might be a obscure bug in the JRE.
I'll try to find a pattern so that it can be re-produced by everyone.
Thanks for the help.

Invalid help link while trying to build programm

I get the following message while trying to use the Build Specifications:
"The following files have links to help files that are invalid. Open the files and fix the help links.
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\addons\Simulation\Utility\Impementation\SIM Time.vi
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\addons\Simulation\ContinuousLinear\Impementation\SIM Integrator.llb\SIM Integrator distributor (for core)(vector).vi
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\addons\Simulation\Utility\Impementation\SIM Reprot Error.vi"
Under Details the an error appers:
Error 7 occurred at ABAPI Check Help Files.vi --> ABAPI Dist Cmp Settings to Disk Hier.vi --> ABAPI Get Settings From File.vi --> SDBEP_Invoke_Build_Engine.vi --> SDBIP_Build_Invoke.vi --> SDBUIP_Build_Rule_Editor.vi --> SDBUIP_CreateNewWizard_Invoke.vi --> SDBUIP_CreateNewWizard_Invoke.vi.ProxyCaller
Possible reason(s):
Labview: File not found. The File might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. for example use \ as path separators on Windows, : on MAC OS and / on Linux.
NI-488: Non-existent board."
I have tryed to open the files and runned them with Shift+Ctrl, I allsow tryed to Mass Compile the files in the simulation folder. but this dosent seem to help.
I don't understand what I should do to fix the help files, anybody who knows?
The problem accures when I am using the VI Array Max & Min PtByPt.
Thanks for any help
-makaveli

Hello!
Please check out this link since it will most likely solve your issues.
What Do I Do When I Get an Invalid Help File Path Error?
http://digital.ni.com/public.nsf/websearch/1F25EBE7E7A07E91862571110080EA0E?OpenDocument
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

InDesign CC (CS7) Scrolling and moving around so slow and choppy!!

Adobe - please send out an update for CC!! Me and IT dept checked my Mac system requirements and all is fine there. Moving around on my pages (e.g. hand tool) and scrolling is so choppy, slow, and lags. And sometimes my art disappears and I'm looking at blank pages until I stop or let refresh for a bit.
I also noticed that when I'm in "preview mode," CPUs go down and much less choppy and smoother moving around, but I can't work in preview mode. (e.g. I need hidden characters on for Indexing markers, and my frames and guides on).
CS6 works MUCH smoother, but I can't save client files down if that's how they provide them to me. Please recommend any other suggestions or hopefully an update will help this issue.

I also hop on the issue to give it some more attention.
InDesign scolling lags badly, Tools are slow, Program crashes. Equal problems using Illustrator/Photoshop.
My Mac is not the newest – but CS6 was running like a charm before.
Some TechSpecs:
OSX Mavericks (Clean Install)
Core2Duo 2.4 GhZ
8GB 1067MhZ DDR3 RAM
OCZ Vertex SSD 256GB
Currently using the Test-Period of CC on this machine to figure out how it works – but that should not be a problem as the Programs are the same. As a student I would prefer the current discount offer (the normal rate is al little too much for me right now). Please fix this problem, otherwise I can't buy it the next year. Btw. Subscription method is great compared to the old payment method.

Columns moving around

For the past few months when I move the mouse over the spreadsheet, columns (with figures) move around, often out of sight, especially off to the left of the sheet. This means that if I want to change a number in a particular cell, I often have to chase it around the screen!
I have Numbers '09, version 2.3 (554) and OSX 10.8.5. I am not sure of the timings but I wonder if this started when I upgraded the operating system to 10.8.5. All I know is that it used to behave well - I haven't always had this problem.
It is probably something simple that I have not done, but I cannot find anything that matches what is happening here. As you will realise, I use the program in a very basic way, just for home use.
I would be very grateful if someone could please tell me how to stop the spreadsheet moving around!
Anne Mowlam

Badunit - I am sorry I did not explain very well.
All the columns move together, so I lose sight of one or several columns off to the side of the screen (or page). I have spent a lot of time on this spreadsheet over the past few months and I realised today that I have had the problem for around the same time. So I checked another sheet that was fairly similar and it seems that the problem is linked to the spreadsheet I am using a lot. I matched the settings of the two but other than having a different font, they looked the same. Nothing fancy is set up in either of them.
The problem one seems to be extremely sensitive to any movement of the mouse. A slight movement of the mouse can send it off 2 inches to the side. There is no problem vertically.
I know it does not solve the problem but I am now wondering if I should create a new spreadsheet and manually enter the figures in again. Start with a clean slate.
One last thought - I have the Apple wireless mouse but it is about 4 years old now, and used a lot. Could it perhaps be wearing out and causing a problem with the task I am using it for most right now?
Anne

Moving Around the Timeline

Hi,
Just a quick question about moving around the timeline. I'm using the up and down arrow keys to jump between cuts, but for some reason I can jump back beween cuts, but when clips are stepped up it doesn't seem to let me jump forward to the next edit.(I'm on the FCP keyboard config)
Also, to jump forward the begining, or back to the end I'm supposed to use the home/end key. does anyone know what this is on a MacBook Pro keyboard?
Thx

I'm using the up and down arrow keys to jump between cuts, but for some reason I can jump back beween cuts, but when clips are stepped up it doesn't seem to let me jump forward to the next edit.
I assume you're referring to when you have more than one track with clips on them. In that case, you need to be mindful of which tracks are targeted; that controls which tracks are subject to the Next/Previous Edit commands.
For example:
Any track that isn't targeted will be ignored by the Next/Previous Edit commands. Just click the header "button" to enable or disable a track. Track targeting affects many other operations in Premiere Pro--for example, adding edits or applying transitions. Check out this Help document page for some more info: Targeting tracks
Not sure about the MBP keyboard question, but a Google search for such turned up this: Home and End Keys on the Macbook Pro

Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop

Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop that I have never seen before, and in Imageready as well. This does not happen in Macromedia Fireworks 8 however.
I am zoomed into an image. Using the hand tool, or the scroll bars or the arrows, as soon as I move an image little messed up line graphic glitches appear and stay in place for the remainder or working with an image, and ultimately covers the image completely after moving around within it a number of times. you can see examples of this in these screenshots I've uploaded:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage04.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage03.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage02.gif
and the lines stay the same size and position even when zooming in. here's the same image w/ the same defects zoomed out and in:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01_zoomed.gif
I've tried trashing & re-installing photoshop completely, tried running it before the updates needed from the original Photoshop application disk, and after. still the same problem.
This occurs only when using the laptop on its own. When I hook it up to my Apple Studio Cinema Display, it works fine. The problem does not occur on the Cinema Display OR the laptop screen! it's very odd. Basically, the laptop is now something I cannot actually use away from my desk until this is resolved.
Has anyone ever encountered this or possibly have any suggestions or advice? Thanks so much!
-Rich
And here are some more specs on my computer & hardware:
Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Serial Number: 4H5456AZRJ7
Sudden Motion Sensor:
State: Enabled
Version: 1.0
GeForce FX Go5200:
Chipset Model: GeForce FX Go5200
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2122
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 16-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
ATA Bus:
MATSHITADVD-R UJ-845E:
Capacity: 1.72 GB
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk5
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported

Hi. Thanks for your responses. There is definitely some incorrectness in the info I provided about the computer. for the Hard Drive, it's odd.. I copied and pasted that from my system profiler.. In actuality the Hard Drive is 74.53 GB. Not sure how that error occurred.
Also I looked again at the computer's memory. I forgot the second larger 1GB memory card when I was copying and pasting from the system profiler. Sorry about that. I was in a but of a rush to get the question out.
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
DIMM1/J31:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Another thing I noticed about the problem I'm facing is that it leaves defects from mouse trails as well in the image window. None of the defects are lasting nor will they print. I close the file and they go away, if I zoom, they stay the same size. I'd agree, it sounds like a video card problem, but the reason I posted here is that only in photoshop and imageready do these problems occur. My guess, if it's the video card is that they are just programs that require more of the system. why my video card would be crapping out now, I have no idea. but I guess that's how it goes.
But why would it work fine when hooked up to the apple cinema display? even on the laptop screen itself the problem is not present. only when the laptop is on its own.
The computer has served me very well for almost 3 years without this problem, so that's why it's something that is not a normal problem that should be expected from this computer. I am grateful to have it & can't afford a new one.. this one is still sitting on my credit card balance. Thankfully I am under the applecare protection plan and will bring it in to the local Mac shop on monday and demonstrate the issue to them.
Thanks for your replies.

Not happy with moving around keys on the timeline

I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!

Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go!

I lost my tool bar on top. I no longer can see the Bookmarks, Tools, or Help links. Where are they and how can I reset them? I had them at first but now I don't see them.

I lost the tool bar on top. I can no longer see the Bookmarks, Tools, or Help links. I had them in when I began with your browser but now they're gone. How do I restore the default toolbar?

* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

Issue while adding Help Link using personalization

Hi... i am adding a help links on all the iRec pages using personalization.
Requirment:-
Need to have a help link on all the pages of iRec at the left corner of the page
So i made the following changes to do this...
1. Created a new Region(This regios is shared by all the pages of iRec)
StackLayout (AM set to deflaut value)
|_
RowLayout (Horz Align set to end)
2. Now i go to the page, click on personalize link at top, and create a new Stack Layout Region below the PageLayoutRN for the Page
and set the extend property of this StackLayout to my above create region.
3. Create a new item under RowLayout, Item Type "Link" and set the destination URI for this link to say "http://google.com"
I do the same steps above on all the pages of iRec and point the destination URI for the link to the one i want to set and all this is done at Site level.
But the issue i am getting is that i am not able to see these personalizations for all the users and at some places the links i created are not clickable. They simply display on the page but cannot be clicked.
Is there something i am doing wrong? so is there any step i did wrongly? Please let me know the solution.
Thanks
Sandeep

It should not be show this behavior. one test you can do in this reference create Two more item at site level say MessageStyleText and one more link and check this behavior to all the user.

Help! Links moving around

Similar Messages

Maybe you are looking for